Brazil’s new national policy on solid waste: challenges and opportunities

Brazil, one of the world’s largest developing countries, has recently introduced a new solid waste management regulatory policy. This new regulatory policy will have implications for a wide variety of stakeholders and sets the stage for opportunities and lessons to be learned. These issues are discussed in this article.     

Beyond network simulators: Fostering novel distributed applications and protocols through extendible design

Simulation has been of paramount importance to the development of novel Internet protocols. Such an approach typically focuses on one of three domains: wireless and other link-layer technologies, routing protocols, and transport-layer mechanisms and protocols. Existing techniques can tackle well simulation at layers 2, 3 and 4 of the TCP/IP architecture, but are not flexible enough to appropriately deal with application-layer protocols. These require simulators that support the modeling of networks and components with different levels of abstraction. Simmcast is an object-oriented framework that focuses on the necessary flexibility for application-layer protocol research. A simulation can be developed by the simple extension of building blocks that closely resemble components of a real network such as hosts, links and routers. The internal complexity of these components, however, is hidden from the user, so he/she can focus on the implementation of the desired protocol characteristics. This paper describes the flexible simulation architecture proposed and instantiated through Simmcast, and draws lessons from our experience in designing, implementing and deploying it. We also present framework instances used to evaluate application-layer protocols, exemplifying how different kinds of simulations can be developed with Simmcast.     

A socially inspired energy feedback technology: challenges in a developing scenario

Raising awareness of the environmental impact of energy generation and consumption has been a recent concern of contemporary society worldwide. Underlying the awareness of energy consumption is an intricate network of perception and social interaction that can be mediated by technology. In this paper we argue that issues regarding energy, environment and technology are very much situated and involve tensions of sociocultural nature. This exploratory investigation addresses the subject by introducing the design of a Socially-inspired Energy Eco-Feedback Technology (SEET), which is composed of an interactive system to trigger and mediate collective savings and a tangible device as a public feedback. Results of an evaluation situated in the context of a school in a socially disadvantaged area in Brazil are discussed, shedding light on the sociocultural aspects related to the subject. The role of the SEET to motivate energy awareness collectively among the social group is assessed, as well as the design characteristics that contributed to that. Outcomes bring to light social aspects and dynamics that would hardly have been predicted, evidencing critical factors related to a socially inspired design approach in the energy awareness domain.     

Influence of Surface Morphology on the Torsion Fracture of NiTi Endodontic Instruments

This study analyzed the influences of manufacturing process (twisting and machining) and surface finishing on the angular distortion, maximum torque, and toughness of two NiTi endodontic instruments (Race—FKG Dentaire and TF—Twisted Files, SybronEndo). Statistical analysis of results showed that TF instruments (twisted) had higher distortion angle (p < 0.05) and lower maximum torque to fracture (p < 0.05) than Race instruments (machined). SEM analysis of fractured instruments showed a surface morphology characteristic of ductile fracture, with plastic deformation in the helical shafts. The results suggest that both instruments are equally suitable for clinical applications. This study is purely scientific as it evaluates only some material properties, and is not intended to endorse a commercial product.     

Oxygen reduction reaction on a Pt/carbon fuel cell catalyst in the presence of trace quantities of ammonium ions: An RRDE study

The effect of trace quantities of ammonia on oxygen reduction reaction (ORR) on carbon-supported platinum catalysts in perchloric acid solutions is assessed using rotating ring disk electrode (RRDE) technique. The study demonstrates that ammonia has detrimental effects on ORR. The most significant effect takes place in the potential region above 0.7 V vs RHE. The effect is explained by the electrochemical oxidation of ammonia, which blocks Pt active sites and increases the formation of H₂O₂. This leads to losses in the disk currents and increments in the ring currents. The apparent losses in ORR currents may occur in two ways, namely, through the blocking of the active sites for ORR as well as by generating a small anodic current, which is believed to have a lower contribution. In addition, a detrimental effect of sodium cations in the potential range below 0.75 V vs RHE was demonstrated. This effect is most likely due to the co-adsorption of sodium cations and perchlorate anions on the Pt surface.     

A new sheep model with automatized analysis of biomaterial-induced bone tissue regeneration

Presently, several bone graft substitutes are being developed or already available for clinical use. However, the limited number of clinical and in vivo trials for direct comparison between these products may complicate this choice. One of the main reasons for this scarcity it is the use of models that do not readily allow the direct comparison of multiple bone graft substitutes, due especially to the small number of implantation sites. Although sheep cancellous bone models are now well established for these purposes, the limited availability of cancellous bone makes it difficult to find multiple comparable sites within a same animal. These limitations can be overcome by the monocortical model here proposed as it consists in 5–6 holes (5 mm Ø), in the femoral diaphysis, with similar bone structure, overlying soft tissue and loading pattern for all defects. Associated to this model, it is also described a fast histomorphometric analysis method using a computer image segmentation test (Threshold method) to assess bone regeneration parameters. The information compiled through the experimental use of 45 sheep in several studies allowed determining that this ovine model has the potential to demonstrate differences in bone-forming performance between various scaffolds. Additionally, the described histomorphometric method is fast, accurate and reproducible.     

Incorporation of Alpha‐Linolenic Acid and Enhancement of n‐3 Fatty Acids in Nile Tilapia: a Factorial Design

A 2² factorial design (two factors at two levels, in triplicate) was performed to investigate the influence of factors A (time of treatment, 15 and 30 days) and B (chia oil content in a supplemented diet, at 2.1 and 4.2 %) in three responses of interest referring to: (a) the incorporation of alpha‐linolenic acid (LNA) in lipids of Nile tilapia fillet; (b) the enhancement of n‐3 fatty acids; and (c) the decrease in the omega‐6/omega3 (n‐6/n‐3) ratio in fish. Factors A and B were significant in the three regression models obtained and the interaction AB was a significant contributor to the LNA and n‐6/n‐3 ratio. Analysis of variance suggested three significant and predictive mathematical models. Response surfaces analyses from designs indicated higher LNA and n‐3 contents and a lower n‐6/n‐3 ratio using both factors A and B in the higher levels (30 days of treatment and 4.2 % of chia oil in the diet for fish) chosen for this study.     

A New Methodology to Evaluate the Cure of Resin-Impregnated Paper for HPL

This paper presents a study on the curing conditions of several resin-impregnated papers and its impact on the performance of HPL (high-pressure decorative laminate). A new methodology for evaluating the bond strength development between the different layers of a HPL(overlay, decorative, and kraft papers) was developed using ABES (Automated Bonding Evaluation System) equipment. The proposed method can be applied to the study of the curing step of the different impregnated paper and the development of bonds between them (overlay paper on decorative paper, decorative paper on kraft paper, and kraft paper on kraft paper) trying to simulate the hot-pressing of an industrial HPL. This will permit to establish a more adapted temperature gradient in hot-press in order to achieve the same curing rate for all layers and provide a good final overall product quality.