Preparation of High-Performance Co3O4 Catalyst for Hydrocarbon Combustion from Co-Containing Hydrogarnet

Supported Co₃O₄ catalysts were prepared via the calcination of Co-containing hydrogarnet, (Ca_3-x Co _x )Al₂(SiO₄)_{3- y} (OH)_4y , at 400 °C. Such precursors with various extents of substitution were synthesized from the hydrothermal reaction of a stoichiometric mixture of calcium oxide, amorphous silica, alumina sol, and cobalt hydroxide at 200 °C. It was found that the catalyst consisted of Co₃O₄, CaO, and mayenite and exhibited a high activity for the combustion of propylene, benzene, and toluene at temperatures below 300 °C.     

Crystallization Behavior of Molecular Compound in Binary Mixture System of 1,3‐Dioleoyl‐2‐Palmitoyl‐sn‐Glycerol and 1,3‐Dipalmitoyl‐2‐Oleoyl‐sn‐Glycerol

Previous studies showed that the stable β‐form of molecular compound (MC) crystals having a double‐chain‐length structure is formed in a binary mixture system of 1,3‐dioleoyl‐2‐palmitoyl‐sn‐glycerol (OPO) and 1,3‐dipalmitoyl‐2‐oleoyl‐sn‐glycerol (POP) with a 1:1 concentration ratio of OPO and POP. The use of MC crystals made of POP and OPO for edible applications, such as margarine, is advantageous due to no‐trans, low‐saturated, and high‐oleic fats. Industrial manufacturing technology involves rapid cooling processes, and the kinetic properties of crystallization of MC of OPO and POP are required. In this study, we clarified the crystallization of MC of OPO and POP under rapid cooling at rates of 1–150 °C min^?1, using synchrotron radiation time‐resolved X‐ray diffraction and differential scanning calorimetry methods. The main results are as follows: (1) POP and OPO crystallized in separate manners without the formation of MC crystals under rapid cooling (>40 °C min^?1), while MC crystals started to form with decreasing rates of cooling in addition to the POP and OPO crystals (<30 °C min^?1); (2) metastable and stable forms sub‐α, α, β′, and β of POP and OPO were formed, whereas the MC crystals of β were formed during the cooling processes; and (3) the heating processes after crystallization by rapid cooling caused separate melting of the metastable and stable forms of POP and OPO crystals and the formation of MC crystals of β made of POP and OPO, as well as melting of the MC crystals alone.     

Fabrication of hierarchically porous spherical particles by assembling mesoporous silica nanoparticles via spray drying

A new type of hierarchically porous materials is fabricated by assembling mesoporous nanoparticles via spray drying. Well-dispersed mesostructured silica nanoparticles (MSN), whose particle size distribution was narrow in the range of 20 nm and 50 nm, were prepared by a thermal deposition method. By spray drying a MSN suspension, MSN were assembled into spherical secondary particles. After calcination, the spherical particles have two types of mesopores, mesopores of 3 nm in size inside of calcined MSN and larger inter-nanoparticle mesopores of about 15-20 nm. This hierarchical pore system should provide nanospaces for efficient mass transport of guest species with different sizes.     

Microfluidic device for the detection of glucose using a micro direct methanol fuel cell as an amperometric detection power source

We designed and prepared a novel microbiosensing system consisting of a microbioreactor fabricated using photosensitive sheets intercalated between Pyrex wafers as a dam structure, together with a micro fuel cell as a power source device between the electrodes for amperometric detection. The dam structure retains enzyme (glucose oxidase, GOx)-immobilized microbeads in a microchannel. Microelectrodes are used as an integrated detector within a microchannel located downstream of the dam structure, and these are used to detect the oxidation current of hydrogen peroxide produced from a glucose sample and GOx. A micro direct methanol fuel cell (mu-DMFC, i.d. 500 microm) was fabricated on a polymeric substrate and was used to supply a potential for the electrochemical detector. In this case, two mu-DMFCs were stacked on one substrate to increase the voltage for the oxidation of hydrogen peroxide. A linear response curve was obtained in range from 0.1 to 10 mM glucose for the designed microbiosensing system. These results show that a microfluidic biosensing system designed with a mu-DMFC device is useful and has the potential to assist minuaturization and simplification of the sensing system, in addition to increasing disposability of the device.     

Analysis of heavy metal pollution in soil using transversely excited atmospheric CO2 laser-induced plasma by trapping the soil in microstructured holes on metal subtargets

A unique technique for direct analysis of soil samples utilizing a special advantage of a transversely excited atmospheric (TEA) CO(2) laser-induced plasma generated at atmospheric pressure on a metal target has been developed. In this technique, a metal subtarget, such as nickel plate, structured with intentional microholes on its surface, each with dimensions of around 100 microm in diameter and depth, was used to selectively trap small sized soil particles by immersing the metal plate subtarget into the polluted soil sample. The trapped small soil particles on the metal subtarget were irradiated by a TEA CO(2) laser (10.6 microm, 1.5 J, 200 ns) at atmospheric pressure under defocused condition with a spot size of 3 mm x 3 mm. This trapping and confining scheme substantially suppresses the blowing off effect; thus, the trapped soil particles can effectively be dissociated and atomized in the microstructured holes. Using this method of a microstructured metal plate subtarget, quantitative analysis was carried out on loam soil samples polluted by Pb. A linear calibration curve was obtained with a detection limit of approximately 50 mg/kg. Preliminary quantitative studies were carried out for a quartz sand sample containing Cr and Hg, resulting in linear calibration curves with detection limits of approximately 25 mg/kg and 10 mg/kg, respectively, at this stage. This technique is promising as a potential field screening tool for soil analysis.     

Estimation of wood stiffness and strength properties of hybrid larch by near-infrared spectroscopy

This work was undertaken to investigate the feasibility of near-infrared (NIR) spectroscopy for estimating wood mechanical properties, i.e., modulus of elasticity (MOE) and modulus of rupture (MOR) in bending tests. Two sample sets having large and limited density variation were prepared to examine the effects of wood density on estimation of MOE and MOR by the NIR technique. Partial least squares (PLS) analysis was employed and it was found that the relationships between laboratory-measured and NIR-predicted values were good in the case of sample sets having large density variation. MOE could be estimated even when density variation in the sample set was limited. It was concluded that absorption bands due to the OH group in the semi-crystalline or crystalline regions of cellulose strongly influenced the calibrations for bending stiffness of hybrid larch. This was also suggested from the result that both alpha-cellulose content and cellulose crystallinity showed moderate positive correlation to wood stiffness.     

Safety and structural analysis of polymers produced in manufacturing process of alpha-lipoic acid

Alpha-Lipoic acid has recently been permitted for use in foodstuffs and is contained in tablets and capsules. Although alpha-lipoic acid is synthesized from adipic acid, the safety of polymers produced during the purification and drying processes has been an issue of concern. Hence, we examined the safety profiles of thermally denatured polymer (LAP-A) and ethanol-denatured polymer (LAP-B) produced in the manufacturing process of alpha-lipoic acid. Furthermore, we conducted structural analysis of these polymers by 1H-NMR and FAB-MS spectroscopy. In a consecutive ingestion test, male and female mice ingested diet containing 0.1 and 0.2% LAP-A and -B for 4 weeks. Blood uric acid, potassium and lactate dehydrogenase (LDH) tended to increase without dose-dependency. Relative liver weights were also increased. However, male dogs that were orally administered LAP-B (500 mg/kg) once did not show any abnormalities in blood parameters or general condition. These findings indicate that alpha-lipoic acid polymers are not acutely toxic; however, chronic ingestion of these polymers may affect liver and kidney functions.     

Effect of static pressure on intracellular pH of adhesive Chinese hamster ovary cells

The effect of static pressure on the intracellular pH of the Chinese hamster ovary (CHO) cell line DR1000L4N was investigated. In cultivation of CHO cells at 0.9 MPa, two distinct populations were observed in the histogram of a flow cytometer, while single population was observed in cultivation at 0.1 MPa. The intracellular pH of the major population at 0.9 MPa was markedly lower than that of the single population at 0.1 MPa.     

Carbon nanotube growth from semiconductor nanoparticles

Nanoscale metal catalysts have been indispensable for carbon nanotube (CNT) synthesis by chemical vapor deposition (CVD). We show that even semiconductor nanoparicles of SiC, Ge, and Si produce single-walled and double-walled CNTs in CVD with ethanol. This implies that nanosize structures might act as a template for the formation of CNT caps composed of five- and six-membered rings. Providing a template for cap formation is the essential role of the catalysts.     

Visualizing vitreous using quantum dots as imaging agents

Vitreous is transparent tissue located between the lens and the retina of the eye, thus, difficult to look at by even ophthalmological microscope. But vitreous is connected with some sight-threatening eye diseases, for example, retinal detachment, macular hole, epi-retinal membrane, and so forth. Quantum dots (QDs) have been applied to a wide range of biological studies by taking advantage of their fluorescence properties. We established a novel technique of aqueous colloidal QD (ACQD) as a vitreous lesion detector. When compared with some conventional dyes used for clinical situation, i.e. fluorescein, indocyanine green, and triamcinolone acetonide, ACQD exerted a higher performance to detect a Weiss Ring. Furthermore ACQD is also effective to perform vitrectomy, an eye surgery to cut and eliminate vitreous. Some functional structures in vitreous are detected clearly when ACQD was injected into an enucleated porcine eye. We demonstrated that ACQD enabled any ophthalmic surgeon to perform vitrectomy reliably, easily, and more safely. Taken together, the ACQD-oriented vitreous staining system will promote ophthalmological science, and it will raise the cure rate of eye diseases