Optical and surface properties of whey protein isolate coatings on plastic films as influenced by substrate,protein concentration,and plasticizer type

Composite film structures of common plastic polymers including polypropylene (PP) or poly(vinyl chloride) (PVC) with whey protein isolate (WPI) coatings may be obtained by a casting method. Optical and surface properties of the resulting WPI‐coated plastic films, as affected by protein concentration and plasticizer type, were investigated to examine the biopolymer coating effects on surface modification with polymeric substrates of opposite polarity. The measured properties involved specular gloss, color, contact angle, and critical surface energy. Regardless of the substrates, WPI‐coated films possessed excellent gloss and no color, as well as good adhesion between the coating and the substrate when an appropriate plasticizer was added to the coating formulations. The protein concentration did not significantly affect gloss of WPI‐coated plastic films. Among five plasticizers applied, sucrose conferred the most highly reflective and homogeneous surfaces to the coated films. The WPI coatings were very transparent and the coated films with various protein concentrations and plasticizers showed no noticeable changes in color. Experimental results suggest that WPI coatings formulated with a proper plasticizer can improve the visual characteristics of the polymeric substrate and enhance water wettability of the coated plastic films. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 335–343, 2004     

Mechanical and fracture behavior of an artificially ultraviolet‐irradiated poly(ethylene‐carbon monoxide) copolymer

In this work, 1 wt % carbon monoxide (CO) poly(ethylene‐carbon monoxide) (ECO) copolymer sheets were artificially exposed to ultraviolet (UV) light with a power density of 3 mW/cm² for up to 130 h. A thorough mechanical characterization of the irradiated material was conducted, in which both the stress–strain data and the values of the quasistatic crack initiation and growth toughness were measured and correlated with companion uniaxial tensile tests and single‐edge‐notched fracture tests. Average values of the elastic modulus, failure strain, and failure stress were determined from the tensile tests. The full‐field optical technique of digital image correlation was used to quantify in‐plane deformation (displacements and displacement gradients) during the fracture experiments and to extract values of the crack initiation and growth fracture toughness. The elastic modulus increased monotonically with UV irradiation for the exposure times used in this investigation. In addition, for low irradiation times of less than 5 h, both the failure strain and failure stress of ECO decreased, and this caused a corresponding decrease in the crack initiation and growth toughness. However, for longer irradiation times, the failure strain remained almost invariable, whereas the failure stress increased by about 25% over that of unirradiated ECO. As a result, for longer irradiation times (>5 h), 1 wt % CO ECO became not only stiffer but also stronger and tougher, as quantified by companion fracture experiments. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 139–148, 2004     

In situ preparation and properties of high‐solid‐content and low‐viscosity poly(methyl methacrylate/n‐butyl acrylate/acrylic acid)/poly(styrene/acrylic acid) composite latexes

With monodispersed poly(methyl methacrylate/n‐butyl acrylate/acrylic acid) [P(MMA/BA/AA)] seeded latex with a particle size of 485 nm and a solid content of 50 wt % as a medium, a series of stable P(MMA/BA/AA)/poly(styrene/acrylic acid) composite latexes with a high solid content (70 wt %) and low viscosities (500–1000 mPa · s when the shear rate was 21 s^?1) was prepared in situ via simple two‐step semicontinuous monomer adding technology. The coagulum ratio of polymerization was about 0.05 wt %. The particle size distribution of such latexes was bimodal, in which the large particle was about 589 nm and the small one was about 80 nm. The latexes combined good mechanical properties with good film‐forming properties. Differential scanning calorimetry showed that the corresponding latex film had a two‐phase structure. The morphology of the latex film was characterized with atomic force microscopy and scanning electron microscopy. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1815–1825, 2007     

Synthesis and characterization of poly(butyl acrylate)/silica and poly(butyl acrylate)/silica/poly(methyl methacrylate) composite particles

Poly(butyl acrylate)/poly(methyl methacrylate) (PBA/PMMA) core–shell particles embedded with nanometer‐sized silica particles were prepared by emulsion polymerization of butyl acrylate (BA) in the presence of silica particles preabsorbed with 2,2′‐azobis(2‐amidinopropane)dihydrochloride (AIBA) initiator and subsequent MMA emulsion polymerization in the presence of PBA/silica composite particles. The morphologies of the resulting PBA/silica and PBA/silica/PMMA composite particles were characterized, which showed that AIBA could be absorbed effectively onto silica particles when the pH of the dispersion medium was greater than the isoelectric potential point of silica. The critical amount of AIBA added to have stable dispersion of silica particles increased as the pH of the dispersion medium increased. PBA/silica composite particles prepared by in situ emulsion polymerization using silica preabsorbed with AIBA showed higher silica absorption efficiency than did the PBA/silica composite particles prepared by direct mixing of PBA latex and silica dispersion or by emulsion polymerization in which AIBA was added after the mixing of BA and silica. The PBA/silica composite particles exhibited a raspberrylike morphology, with silica particles “adhered” to the surfaces of the PBA particles, whereas the PBA/silica/PMMA composite latex particles exhibited a sandwich morphology, with silica particles mainly at the interface between the PBA core and the PMMA shell. Subsequently, the PBA/silica/PMMA composite latex obtained had a narrow particle size distribution and good dispersion stability. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3425–3432, 2006     

Morphology and characterization of conductive films based on polyaniline‐coated polystyrene latexes

The polyaniline (PANI)‐coated polystyrene (PS) latexes were synthesized, and the electrically conductive films were prepared thereafter. The weight ratio of PANI was 5%. Thermal analysis of the latices was performed using DSC and TGA. In this study, the electrically conductive films were prepared above the PS glass transition temperature (T_g). During the film formation, the effects of the annealing temperature and atmosphere (air or N₂) on the film resistance were investigated. In addition, the film morphology was observed utilizing scanning electron microscopy. The film resistance decreased in the initial heating stage due to the increasing temperature and the compaction of film. Then the film resistance increased with further annealing due to the aging of PANI. Typically, the film resistance was about 6000 Ω/sq, and the conductivity was 0.3 S/cm. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5406–5413, 2006     

Detailed Molecular Structure Modeling – A Path Forward to Designing Application Properties of ldPE

Summary: This paper describes a step on the ambitious aim to “design” application properties of ldPE by first simulating the detailed molecular structure of a high‐pressure tubular reactor product. The reactor of a certain configuration produces under well‐defined operating conditions. The next step is to correlate the structure with the application properties. Finally, the sequence will be reversed in order to deduce the operating conditions, which lead to the desired product quality. Two‐dimensional distributions, in molecular weight and branching frequency, as well a two compartment models with a core and a shell stream were simulated and compared with experimental results. Therefore, CFD simulations were carried out to discretize the reaction medium. Samples were taken from both pilot and commercial plants. The TREF‐SEC analytical method was successfully applied in order to measure the microscopic structure of the material. The tremendous numerical problems were solved with the help of the software PREDICI .

Detailed MWD for a pilot scale reactor product.     

Effect of reaction kinetics of polymer electrolyte on the ion‐conductive behavior for poly(oligo oxyethylene methacrylate)–LiTFSI mixtures

The effect of the reaction kinetics on the ionic conductivity for a comblike‐type polyether (MEO) electrolyte with lithium bis(trifluoromethane sulfonyl)imide (LiTFSI) was characterized by DSC, complex impedance measurements, and ¹H pulse NMR spectroscopy. The ionic conductivity of these electrolytes was affected by the reaction condition of the methacrylate monomer and revealed by the glass transition temperature (T_g), spin–spin relaxation time (T₂), steric effects of the terminal groups, and the number of charge carriers indicated by the VTF kinetic parameter. In this system, the electrolytes prepared by the reaction heating rate of 10°C/min of MEO–H and 15°C/min of MEO–CH₃ showed maximum ionic conductivity, σ_i, two to three times higher in magnitude than that of the σ_i of the others at room temperature. As experimental results, the reaction kinetic rate affected the degree of conversion, the ionic conductivity, and the relaxation behaviors of polyether electrolytes. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2149–2156, 2003     

微机用于抛物线齿同步带传动强度理论的研究

采用啮合原理与弹性力学复交函数相结合的方法，借助计算机对抛物线齿同步带传动强度理论进行了系统研究，并将整个计算过程编制成ＲＨＤＧＲＡＰＨ软件。利用该软件进行了带齿和轮齿及刀具齿形设计、啮合原理分析、应力和变形计算、刀具可加工最小齿数的确定及加工误差分布计算。     

High catalytic activity of PdOx/MnO2 for CO oxidation and importance of oxidation state of Mn

PdO_x/MnO₂ has been examined as a catalyst for CO oxidation using a conventional flow reactor at reaction temperatures between 50 and 150°C. In the reaction conditions of GHSV (gashourlyspacevelocity) of 1.22 × 10⁵/h and CO concentration of 2000 ppm, PdO_x/MnO₂ showed higher catalytic activity compared with PdO_x/Mn₂O₃, which had been previously reported as an effective catalyst due to the cooperative action of Pd and Mn₂O₃ for this reaction. The reason for higher activity of PdO_x/MnO₂ than PdO_x/Mn₂O₃ has been investigated using TPR (temperatureprogrammed reduction) and XPS studies. TPR showed that PdO_x/MnO₂ could be reduced by CO at much lower temperature than PdO_x/Mn₂O₃. During the experiment of reduction and oxidation, XPS showed that the valence of Mn in the PdO_x/MnO₂ was between 4+ and 3+, which is higher than that of Mn in the PdO_x/Mn₂O₃ catalyst of which the valence has been reported to be between 3+ and 2+. It is known that in this catalyst system the support supplies oxygen onto Pd, where the oxidation occurs with adsorbed CO, and the ability of the support to provide oxygen improves the performance of the catalyst. Therefore, it was concluded that the readiness of MnO₂ to be reduced with maintaining a higher oxidation state showed higher CO oxidation activity than Mn₂O₃ as support for PdO_x.     

Moisture absorption behavior of rubber‐modified epoxy resins

The moisture absorption behavior of diglycidyl ether of bisphenol A/ethylene diamine resins incorporating a carboxy‐terminated butadiene–acrylonitrile rubber was investigated and associated with their morphology of phase separation. Although the diffusion coefficient of moisture was increased with the rubber content, its activation energy and free volume for moisture diffusion were barely changed until phase inversion occurred. After phase inversion, the free volume was significantly increased, and the activation energy decreased. In addition, the moisture absorption also reduced the β‐transition temperature of the resins and slightly increased the glass‐transition temperature before phase inversion. However, the reverse was found after phase inversion. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3718–3724, 2002