An investigation into physicochemical characteristics of ash produced from combustion of oil palm biomass wastein a boiler

Ash derived from combustion of Malaysian oil palm biomass (empty fruit bunches consisting of fibers) was physically and chemically characterized in order to provide a comprehensive understanding of its specific properties in terms of toxicity, compositions and reusability. Principal analyses conducted include particle size distribution, scanning electron microscopy, elemental dispersive X-ray, elemental analysis, toxicity characteristic leaching procedure (TCLP) as well as thermogravimetric, X-ray diffractometry and Fourier-transform infrared analyses. TCLP result indicated that the oil palm ash (OPA) should not be classified as toxic wastes in terms of heavy metal leachability since leachable copper, cadmium, lead and nickel concentrations were detected below the stipulated leachability limits. It was determined that the OPA contained high amount of potassium as well as presence of silica which implied its suitability to be reused as crude fertilizer or cement replacement material.     

控制性水库建设模式研究

水库梯级（尤其是控制性水库梯级）的建设在西南水电开发中具有举足轻重的地位。但控制性水库梯级一般位于河流上游，为获得需要的调节库容，要求有较高的坝，从而增加筑坝的难度，水库淹没较大，相应的投资亦较大，故经济性相对于其它类型的电站较差。为促进控制性水库梯级的建设，有必要对控制性水库的建设模式进行研究，寻求其可能的投资分摊方式。本文在合理核算上游控制性水库梯级对其下游梯级受益电站补偿调节效益的基础上，对上游控制性水库梯级建设模式进行了研究，提出了控制性水库梯级几种可能的建设投资分摊模式。     

Cooperative cache-based data access in ad hoc networks

Cooperative caching, in which multiple nodes share and coordinate cached data, is widely used to improve Web performance in wired networks. However, resource constraints and node mobility have limited the application of these techniques in ad hoc networks. We propose caching techniques that use the underlying routing protocols to overcome these constraints and further improve performance.     

现代电子产品焊接质量的检测技术

介绍了现代电子产品焊接质量的检测技术,以及用于检查焊点质量和组装板(SMA)功能的测试仪器的工作原理及测试能力.目前常见和广泛使用的焊接质量检测方法是人工目测检查,其主要问题是其主观性,只能用来检测电子元件的形状、尺寸、颜色、表面特征及焊点的外观质量;自动光学检测(AOI)可以在整个过程中发现和纠正缺陷,但只是外在的焊点缺陷;激光/红外线组合式检测系统、X射线检测系统可以分析焊点微米级水平的缺陷,能找出其他检测所不能可靠地发现的缺陷,包括空洞、焊点形状差和冷焊锡点等;另外,X射线检测系统能一次测试单面或双面电路,准确地定位缺陷,获取工艺参数,例如锡膏厚度等.     

Analysis and comparison of two-dimensional permanent-magnet arrays for planar motor

This paper investigates three kinds of permanent-magnet arrays used in planar motors with polarity centers distributed in the lattices of a matrix. The magnetic field of every kind of magnet array is analyzed by analytical methods. First, we give a Laplace equation of magnetic scalar potential and a series of boundary conditions. Then, we derive the analytical expressions of magnet field strength and magnet flux density in the air gap of each kind of magnet array by the method of separation of variables. Finally, we compare the three types of magnet arrays on the basis of the analytical solutions.     

SDS/正戊醇/水体系的液晶研究

在 2 5℃测定了十二烷基硫酸钠 (SDS) /正戊醇 /水三元体系的相平衡 ,确定了液晶区域的边界范围。在液晶区域内选取一系列样品点 ,用差示扫描量热法 (DSC)和2 HNMR与液晶照片对照 ,研究了该体系的液晶结构特点。结果表明 :在恒定温度下 ,该体系存在着两个液晶区域 ,并且随含水量的增加 ,液晶结构发生变化。当组成固定时 ,体系的液晶相结构随温度升高也发生变化     

Level set and geodesic active contours based measurement of material removal between serial sections

The measurement of the thickness of material removed between serial sections is a crucial step of three-dimension reconstruction. Geodesic active contours is an efficient method for contour detection of objects on an image. The indents on the SiC/Al composite micrographs are segmented by using level set and geodesic active contours. After getting the contours of the indents, we calculate the distance from the uppermost pixel to the lowermost pixel to get the vertical diagonal length, and calculate the distance from the leftmost pixel to the rightmost pixel to get the horizontal diagonal length of each contour. Then the final length of each diagonal is acquired by averaging the vertical diagonal length and the horizontal diagonal length, respectively. The Vickers’ indenter is made by a square pyramidal-shaped diamond with opposite faces at an angle of 136°, so the thickness of material removed between two serial sections and the length difference of the diagonals on the two serial sections has a definite geometrical relation. Thus the thickness of material removed between two serial sections is acquired using the geometrical relation.