Understanding 'clean-up' of III-V native oxides during atomic layer deposition using bulk first principles models

The use of III-V materials as the channel in future transistor devices is dependent on removing the deleterious native oxides from their surface before deposition of a gate dielectric. Trimethylaluminium has been found to achieve in situ 'clean-up' of the oxides of GaAs and InGaAs before atomic layer deposition (ALD) of alumina. Here we propose six reaction mechanisms for 'clean-up,' featuring exchange of ligands between surface atoms, reduction of arsenic oxide by methyl groups and desorption of various products. We use first principles Density Functional Theory (DFT) to determine which mechanistic path is thermodynamically favoured based on models of the bulk oxides and gas-phase products. We therefore predict that 'clean-up' of arsenic oxides mostly produces As4 gas. Most C is predicted to form C2H6 but with some C2H4, CH4 and H2O. An alternative pathway is non-redox ligand exchange, which allows non-reducible oxides to be cleaned-up.     

Biobased Polyurethane Composite Foams Reinforced with Plum Stones and Silanized Plum Stones

In the following study, ground plum stones and silanized ground plum stones were used as natural fillers for novel polyurethane (PUR) composite foams. The impact of 1, 2, and 5 wt.% of fillers on the cellular structure, foaming parameters, and mechanical, thermomechanical, and thermal properties of produced foams were assessed. The results showed that the silanization process leads to acquiring fillers with a smoother surface compared to unmodified filler. The results also showed that the morphology of the obtained materials is affected by the type and content of filler. Moreover, the modified PUR foams showed improved properties. For example, compared with the reference foam (PUR_REF), the foam with the addition of 1 wt.% of unmodified plum filler showed better mechanical properties, such as higher compressive strength (~8% improvement) and better flexural strength (~6% improvement). The addition of silanized plum filler improved the thermal stability and hydrophobic character of PUR foams. This work shows the relationship between the mechanical, thermal, and application properties of the obtained PUR composites depending on the modification of the filler used during synthesis.     

Impact of Liposomal Drug Formulations on the RBCs Shape,Transmembrane Potential,and Mechanical Properties

Liposomal technologies are used in order to improve the effectiveness of current therapies or to reduce their negative side effects. However, the liposome–erythrocyte interaction during the intravenous administration of liposomal drug formulations may result in changes within the red blood cells (RBCs). In this study, it was shown that phosphatidylcholine-composed liposomal formulations of Photolon, used as a drug model, significantly influences the transmembrane potential, stiffness, as well as the shape of RBCs. These changes caused decreasing the number of stomatocytes and irregular shapes proportion within the cells exposed to liposomes. Thus, the reduction of anisocytosis was observed. Therefore, some nanodrugs in phosphatidylcholine liposomal formulation may have a beneficial effect on the survival time of erythrocytes.     

Removal of organic matter by coagulation enhanced with adsorption on PAC

The removal of humic acids and phenol from model solution by coagulation and adsorption on powdered activated carbon (PAC) was investigated. A PAX XL-69 polyaluminum chloride was applied as a coagulant. The adsorption of humic acids and phenol on activated carbon for single- and bi- component solutions was studied. It was found that coagulation without PAC addition was less effective than the adsorption-coagulation integrated system. Coagulation enhanced with adsorption on activated carbon was more effective when coagulation was preceded by adsorption than when the two processes were carried out simultaneously. The best results were obtained at pH 7. Phenol and color were removed pletely, UV₂₅₄ absorbance was reduced by about 99% and COD-Mn was reduced by 81-89%.     

Gold(III) ions sorption on sulfur-containing polymeric sorbent based on 2,2‘-thiobisethanol dimethacrylate

ABSTRACT

Studies of gold(III) ions sorption from hydrochloric acid solutions on 2,2‘-thiobisethanol dimethacrylate/ethylene glycol dimethacrylate copolymer were performed. The correlation between the concentration of HCl (0.0001–4 M) and sorption efficiency (370–140 mg g^?1) was observed. The kinetics of sorption and the parameters of Langmuir and Freundlich isotherms for the studied systems were determined. The use of 0.8 M thiourea in 3 M HCl as eluent assured the high recovery degree of sorbed ions. It can, therefore, be concluded that newly synthesized sulfur-containing sorbent can be used in the recovery and concentration of gold(III) ions.     

Phenolic compounds from winemaking waste and its antioxidant activity towards oxidation of rapeseed oil

The effects of extraction parameters on bioactive compound contents of winemaking waste extracts (WWE) and its effect on rapeseed oil oxidative stability were evaluated. Research showed that the total phenols and anthocyanin contents and antioxidant activity (AA) of WWE significantly depended on the extraction parameters. Increasing the temperature (60 °C) and time (5 h) of extraction and an addition of water to ethanol statistically improved the rate of active component extraction. HPLC analysis showed that procyanidin B_2, catechin, gallic acid, γ‐resorcylic acid and p‐coumaric acid were the major phenolic compounds of WWE. Important correlations between total phenolic compounds quantified by HPLC and both DPPH and (ferric reducing antioxidant power) (FRAP) values were found. WWE added to the oil at three different levels clearly slowed down the process of fatty acid oxidation, inhibiting hydroperoxide formation by about 86%, comparable with BHT, while it was more effective than that of α‐tocopherol. When using volatile compound formation as a marker of lipid oxidation, WWE at the level of 2000 ppm were the most effective inhibitors of the decomposition of hydroperoxides. The research showed that the WWE are a rich source of phenolic compounds with powerful antioxidant activities and are suitable for preventing rapeseed oil oxidation.     

Cross‐Linking of Polyesters Based on Fatty Acids

This study aims at obtaining cross‐linked polymeric materials of biomass origin. For this purpose, one‐pot polyesterification of methyl ricinoleate and methyl 12‐hydroxystearate using titanium isopropoxide as a catalyst is performed leading to polyesters known as estolides. The obtained estolides are successfully cross‐linked using dicumyl peroxide or a sulfur vulcanization system. The so‐formed bio‐based elastomers appear to exhibit promising properties. The latter are analyzed by mechanical tensile tests and thermal techniques (TGA, DSC, DMA) and show high thermal stability (T_5% = 205–318 °C), tailored physico‐mechanical properties (low glass transition temperature in the range from ?69 to ?54 °C), and good tensile strength (0.11–0.40 MPa). Networks prepared from high molecular weight estolides appear to be promising bio‐based elastomers. Practical Applications: The vegetable oil‐based estolides described in this contribution are new fully bio‐based precursors for further elastomers synthesis. The resulting estolide networks (obtained by peroxide or sulfur cross‐linking) exhibit tailored thermo‐mechanical properties.     

Crosslinked blends of poly(lactic acid) and polyacrylates: AFM, DSC and XRD studies

The blends based on poly(lactic acid), (PLA) and polyacrylates (1:1 weight ratio) have been prepared by photopolymerization of three different multifunctional acrylate monomers (pentaerythritol triacrylate, pentaerythritol tetraacrylate and dipentaerythritol pentaacrylate) in matrix of linear PLA. The structure of these systems has been studied by Atomic Force Microscopy (AFM), Differential Scanning Calorimetry (DSC) and X-ray Diffraction (XRD). It was found that the blends are highly crosslinked, rough, heterogeneous and some of them – semicrystalline. The effect of UV-irradiation on surface morphology of obtained mixtures was studied. The viscometry has been applied for measurements of changes of PLA molecular weight resulting of photodegradation. It was shown that blends are much more photostable than pure PLA.     

Electrochemical and spectral properties of meta-linked 1,3,5-tris(aryl)benzenes and 2,4,6-tris(aryl)-1-phenoles, and their polymers

We present electrochemical and spectral properties of symmetric monomers 1,3,5-tris(aryl)benzenes and 2,4,6-tris(aryl)-1-phenols and their polymers. These compounds contain thienyl, furyl or EDOT moieties attached to central benzene or phenol ring at the meta-position, synthesized by a Stille cross-coupling procedure. All monomers are electroactive and undergo electropolymerization creating thin films on an electrode surface. Polymers with meta-linkages were obtained by electrochemical oxidation. Detailed cyclic voltammetry and in situ UV-vis spectroelectrochemistry show that polymers with hydroxy groups exhibit higher conductivity and better stability than with benzene core. Interesting and different behavior occurs for 2,4,6-tris(2-thienyl)-1-phenol, for which the characteristic, sharp, redox peak is observed.