Performance of GaAs-AlGaAs V-grooved inner stripe quantum-well wirelasers with different current blocking configurations

GaAs-AlGaAs V-grooved inner stripe (VIS) quantum-well wire (QWW) lasers grown by metalorganic chemical vapor deposition with different current blocking configurations, n-blocking on p-substrate (VIPS), p-n-p-n blocking on n-substrate (VI(PN)_nS) and p-blocking on n-substrate (VINS) have been fabricated and characterized. The VIPS QWW lasers show the most stable characteristics with effective current confinement: one of the lasers shows fundamental transverse mode, lasing up to 5 mW/facet, typical threshold current of 39.9 mA at 818.5 mm, an external differential quantum efficiency of 24%/facet, and characteristic temperature of 92 K. The current tuning rate was almost linear at 0.031 mm/mA, and the temperature tuning rate was measured to be 0.14 nm/°C. Comparison of the light output versus current characteristics of the lasers with different current blocking configurations is presented here     

Motion based object tracking with mobile camera

An efficient algorithm which detects and tracks a moving object is proposed. The global motion energy caused by camera movement is eliminated by finding the maximal matching position with the cross-correlation value between two consecutive frames using the spiral scanning technique. The region of a moving object is segmented exactly by combining the results of the temporal derivatives and edge map from one image, and the actual centroid of the moving object is determined as the mid-point of the cumulative distribution of the projection profile of the region     

Development of the gel pond technology

A review of the development of the gel pond technology is presented. First, the emergence and growth of solar pond technology since the 1950's is described. The inherent problems encountered with the conventional salt gradient ponds are discussed, leading to the concept of the solar gel pond in which the salt gradient layer in the former is replaced by a transparent polymer gel. The major work in the first phase dealt with the experimental development of a polymer gel which met certain selection criteria. The criteria considered included transmissivity, stability of physical and chemical properties, high viscosity and other physical and optical properties. The gradual development of the polymer gel through an alternating process of testing and elimination and evaluation of relevant properties of the gel has been described. Modeling and optimization studies of the solar gel pond have been presented. Bansal and Kaushik's model for a salt gradient pond has been modified for a solar gel pond, and the results of the simulation are presented in a graphical form to serve as a quick reference for estimation of pond surface area, depth and flow rate for heat extraction depending on the extreme temperature required in the storage zone and the required heat load. Then, a cost-benefit economic analysis compares the economics of a solar gel pond with a conventional salt gradient pond. The construction of an experimental gel pond (18 m²) at The University of New Mexico is described, and the results of the study are summarized. Information on commercial scale ponds at Chamberino, New Mexico (110 m²), and in Albuquerque, New Mexico (400 m²), is provided. The review of the technology demonstrates the immense potential of the gel pond as a source of alternate energy for the years ahead.     

Representation and reconstruction of polygons and polyhedra using Hierarchical Extended Gaussian Images

In this paper, two new representation schemes called the Branched Gaussian Image (BGI) and the Hierarchical Extended Gaussian Image (HEGI) are proposed. They can be used for uniquely representing both concave and convex, two-dimensional figures and three-dimensional objects. The representation by the Branched Gaussian Image involves several Gaussian spheres connected by branches where the traversing directions might be different. Examples showing how the use of the BGI enables us to achieve the mapping and inverse mapping of concave polygons and polyhedra uniquely are presented. The Gaussian spheres in the BGI can be organized into a tree-like hierarchical structure known as the Hierarchical Extended Gaussian Image. A general procedure for mapping a polygon or polyhedron to its HEGI representation is described. An approach for reconstructing concave polygons from Branched Gaussian Images is presented. The reconstruction of a concave polyhedron from its Hierarchical Extended Gaussian Images by using an iterative method or a closed-form method for each convex component is also described.     

Pore‐free mold‐pattern‐transfer method for barrier ribs of HD PDPs

Abstract— Among various barrier‐rib manufacturing processes, the mold‐pattern‐transfer method has potential to reduce processing cost as well as the manufacture of high‐resolution pixels. In this study, the effects of major processing variables of the mold‐pattern‐transfer process on the formation of air‐trapped pores within barrier ribs were examined. The results indicated that with an optimum combination of the processing variables, barrier ribs without trapped defects can be produced, demonstrating the possibility of reducing the number of processing steps and costs of barrier ribs.     

A 3.3-V single power supply 16-Mb nonvolatile virtual DRAM using aNAND flash memory technology

A 3.3-V 16-Mb nonvolatile memory having operation virtually identical to DRAM with package pin compatibility has been developed. Read and write operations are fully DRAM compatible except for a longer RAS precharge time after write. Fast random access time of 63 ns with the NAND flash memory cell is achieved by using a hierarchical row decoder scheme and a unique folded bit-line architecture which also allows bit-by-bit program verify and inhibit operation. Fast page mode with a column address access time of 21 ns is achieved by sensing and latching 4 k cells simultaneously. To allow byte alterability, nonvolatile restore operation with self-contained erase is developed. Self-contained erase is word-line based, and increased cell disturb due to the word-line based erase is relaxed by adding a boosted bit-line scheme to a conventional self-boosting technique. The device is fabricated in a 0.5-μm triple-well, p-substrate CMOS process using two-metal and three-poly interconnect layers. A resulting die size is 86.6 mm², and the effective cell size including the overhead of string select transistors is 2.0 μm²     

The effectiveness of modified ingram therapy compared with severity of psoriasis

PURPOSE: This study investigated the pathogenesis of tractional retinal detachment associated with proliferative vitreoretinopathy in an experimental model, using immunohistochemical staining. METHODS: To produce tractional retinal detachment in rabbit eyes, homologous cultured fibroblasts obtained from the gluteal muscle fascia were injected intravitreously. Right eyes of 20 rabbits in the study group, and 7 rabbits in the control group were followed for 26 days at weekly intervals with indirect ophthalmoscopy and fundus photographs. RESULTS: During the follow-up period grade III tractional retinal detachment developed in 11 eyes, grade II in six, and grade 1 in three eyes. The spindle-shaped cells contributed predominantly to the development of epiretinal membrane, and a smaller number of round small and large cells. In 10/17 grade II and III eyes, spindle-shaped cells had vimentin, 7/10 had actin, 5/17 had GFAP, 4/17 had S-100 protein immunoreactivity. Round small and large cells expressed S-100 protein, GFAP and actin in 5/17 eyes. Epiretinal membrane appeared to be formed by spindle-shaped fibroblast-like cells and small and large round glia-like cells. Actin positivity of spindle-shaped and round cells was taken as a marker of contractile elements of the cells and their locomotional features. CONCLUSIONS: These features are believed to be involved in contraction of the membrane and retinal detachment.     

Central GABAA and GABAB receptor modulation of basal and stress-induced plasma interleukin-6 levels in mice

The development of control strategies for loiasis is of crucial importance in endemic areas and depends heavily on the accurate identification of occult-infected individuals. A polymerase chain reaction (PCR) and nested polymerase chain reaction (nested PCR) were developed and based on sequences of the repeat 3 region (15r3) of the gene encoding a Loa loa 15-kD protein. The assays was performed on 20 blood samples from occult-infected subjects and 30 from field-collected amicrofilaremic individuals. The size of the initial PCR product was 396 basepairs (bp). When this initial amplification using primers 15r3(1) and 15r3(2) was carried out for 30 cycles, the PCR products from three of the 20 occult-infected and five of the 30 amicrofilaremic individuals were visualized after electrophoresis by staining the gel with ethidium bromide. Subsequent Southern blotting and hybridization with the specific probe revealed hybridization in 19 of 20 occult-infected and 23 of 30 amicrofilaremic samples but only after two days of exposure of the blot to the x-ray film. When the nested PCR was carried out (product size = 366 bp, primers 15r3(3) and 15r3(4)), 19 of 20 occult-infected and 23 of 30 amicrofilaremic samples that were positive by Southern hybridization of the initial PCR products were strongly positive by staining with ethidium bromide. Qualitative Southern blotting of the nested PCR products using the same probe previously described confirmed the ethidium bromide staining results after a very short exposure time of 4 hr. These results demonstrate that the nested PCR amplification product is specific and that its sensitivity in detecting occult loiasis is 95%. This approach has significant promise for the screening of large human populations for active loiasis without the requirement for blotting and hybridization of the PCR products.     

Vertical bridgman techniques to homogenize zinc composition of CdZnTe substrates

In order to improve the Zn homogeneity along the axial direction of CdZnTe boule, we have employed a modified Bridgman technique using a (Cd, Zn) alloy source in communication with the melt, whose temperature has been gradually changed from 800 to 840°C during growth. Electron probe microanalysis (EPMA) measurements of Zn composition in the boule shows an excellent homogeneity of Zn along the axis of the CdZnTe boule compared with results in a boule grown by using a fixed source temperature. We have performed a numerical simulation to obtain the approximate temperatures of additional heating and cooling needed to improve the radial Zn homogeneity. CdZnTe boule has been grown by seeded vertical Bridgman furnace with two zones of heater and cooler. Ultraviolet/visible spectroscopic measurements of Zn composition over the length of the boule indicate that the radial distribution of Zn composition is very homogeneous in the body region of the boule, where the radial variation of Zn composition is ±0.0005.