How to identify water from thickener aqueous solutions by touch

Water detection is one of the most crucial psychological processes for many animals. However, nobody knows the perception mechanism of water through our tactile sense. In the present study, we found that a characteristic frictional stimulus with large acceleration is one of the cues to differentiate water from water contaminated with thickener. When subjects applied small amounts of water to a glass plate, strong stick-slip phenomena with a friction force of 0.46 ± 0.30 N and a vertical force of 0.57 ± 0.36 N were observed at the skin surface, as shown in previous studies. Surprisingly, periodic shears with acceleration seven times greater than gravitational acceleration occurred during the application process. Finite-element analyses predicted that these strong stimuli could activate tactile receptors: Meissner''s corpuscle and Pacinians. When such stimuli were applied to the fingertips by an ultrasonic vibrator, a water-like tactile texture was perceived by some subjects, even though no liquid was present between the fingertip and the vibrator surface. These findings could potentially be applied in the following areas: materials science, information technology, medical treatment and entertainment.     

High tensile strength fiber of poly[(R)‐3‐hydroxybutyrate‐co‐(R)‐3‐hydroxyhexanoate] processed by two‐step drawing with intermediate annealing

High tensile strength fibers of poly[(R)‐3‐hydroxybutyrate‐co‐(R)‐3‐hydroxyhexanoate] [P(3HB‐co‐3HH)], a type of microbial polyesters, were processed by one‐step and two‐step cold‐drawn method with intermediate annealing. Thermal degradation behaviors were characterized by differential scanning calorimeter and gel permeation chromatography measurements. Thermal analyses were revealed that molecular weights decreased drastically within melting time at a few minute. One‐step cold‐drawn fiber with drawing ratio of 10 showed tensile strength of 281 MPa, while tensile strength of as‐spun fiber was 78 MPa. When two‐step drawing was applied for P(3HB‐co‐3HH) fibers, the tensile strength was led to 420 MPa. Furthermore, the optimization of intermediate annealing condition leads to enhance the tensile strength at 552 MPa of P(3HB‐co‐3HH) fiber. Wide‐angel X‐ray diffraction measurements of these fibers suggest that the fibers with high tensile strength include much amount of the planer‐zigzag conformation (β‐form) as molecular conformation together with 2₁ helix conformation (α‐form). © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41258.     

Modeling method of fast transient for unsymmetrical stray capacitance to ground

Transient characteristic of power system apparatus in a high‐frequency region should be modeled with stray capacitors. Pi‐type circuit is commonly used to represent the stray capacitors between terminals and those to the ground. A modeling method for the pi‐type circuit with unsymmetrical stray capacitances to ground is proposed in this paper. To obtain the unsymmetrical stray capacitances to ground, a couple of differential‐mode measurements are interchangeably applied. The parameters of the pi‐type circuit can be determined by the measurements with a common‐mode measurement. A nonlinear least‐squares method is used to estimate the capacitances. The method is applied to compose an equivalent circuit of a miniature circuit breaker (MCB), which has unsymmetrical stray capacitances to ground. The application is not only for the MCB but also for a scaled model of a high‐voltage circuit breaker. A gas‐filled arrester is used as a voltage sensor for the test because the voltage across the stray capacitor cannot be directly measured due to the input capacitance of a voltage probe. A transient response of the MCB with the gas‐filled arresters is numerically simulated to show the usefulness of the equivalent circuit. © 2015 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Nickel‐Catalyzed Suzuki–Miyaura Coupling of a Tertiary Iodocyclopropane with Wide Boronic Acid Substrate Scope: Coupling Reaction Outcome Depends on Radical Species Stability

We describe a nickel‐catalyzed Suzuki–Miyaura arylation of a tertiary iodocyclopropane with arylboronic acids; this is an efficient and convergent strategy for providing various enantioenriched arylcyclopropanes with a quaternary stereogenic center. This is the first metal‐catalyzed coupling between a tertiary alkyl electrophile and a wide range of aromatics, including heteroaromatics. We found that the outcome of the Ni‐catalyzed coupling with halides as electrophiles was dependent on the stability of the radical species formed during the reaction. The use of tert‐butyl alcohol (t‐BuOH) as the reaction solvent was very effective, because of its stability under the radical‐generating reaction conditions.

     

Reaction joining of SiC ceramics using TiB2-based composites

SiC ceramics were reaction joined in the temperature range of 1450–1800 °C using TiB₂-based composites starting from four types of joining materials, namely Ti–BN, Ti–B₄C, Ti–BN–Al and Ti–B₄C–Si. XRD analysis and microstructure examination were carried out on SiC joints. It is found that the former two joining materials do not yield good bond for SiC ceramics at temperatures up to 1600 °C. However, Ti–BN–Al system results in the connection of SiC substrates at 1450 °C by the formation of TiB₂–AlN composite. Furthermore, nearly dense SiC joints with crack-free interface have been produced from Ti–BN–Al and Ti–B₄C–Si systems at 1800 °C, i.e. joints TBNA80 and TBCS80, whose average bending strengths are measured to be 65 MPa and 142 MPa, respectively. The joining mechanisms involved are also discussed.     

Space charge field effect on light emitting from tetracene field-effect transistor under AC electric field

By applying square wave AC voltage to the Au source electrode of tetracene based field-effect transistor (FET), electroluminescence (EL) was obtained. The results suggest that electrons and holes were injected alternately from the source electrode and recombined each other, and lead to the EL. This type of EL was localized at the interface between the source electrode and tetracene, and enhanced periodically with two relaxation times in accordance with the applied AC voltage cycle. We modeled the carrier behavior in the FET and explained the decay of EL, taking into account the space charge field contribution. Finally, using an AC voltage superposed on DC bias voltage, it was shown that electron injection was prompted only by space charge field.     

Study of crater formation and sputtering process with large gas cluster impact by molecular dynamics simulations

Molecular dynamics (MD) simulations of large argon clusters impacting on silicon solid targets were performed in order to study the transient process of crater formation and sputtering. The MD simulations demonstrate that the initial momentum of incident cluster is transferred to target surface atoms through multiple collision mechanism, where the initial momentum, which is along to the surface normal before impact, is deflected to lateral direction. This momentum transfer process was analyzed by the calculation of the velocity at the crater edge (the interface between cluster and target). In the case of Ar₁₀₀₀ cluster impact on Si(1 0 0) target at low energy per atom less than 40 eV/atom, the maximum value of lateral velocity of the crater edge increases in proportional to the velocity of incident cluster atoms. On the other hand, the crater edge velocity saturates over 40 eV/atom of incident energy per atom. In this case, the whole of constituent cluster atoms are implanted into the target and expand in both lateral and reflective directions at the subsurface region of the target. These MD simulations demonstrated that this collisional process result in the high yield sputtering of the target atoms.     

Lipid components,fatty acid distributions of triacylglycerols and phospholipids in rice brans

Endogenous tocochromanols in extracted lipids from rice brans of the five cultivars were determined by high-performance liquid chromatography, and were investigated in relation to the fatty acid (FA) distribution of triacylglycerols (TAG) and phospholipids (PL). The dominant tocols were α-tocopherol and γ-tocotrienol, followed by α-tocotrienol and with much smaller amounts of γ-tocopherol and δ-tocotrienol. The lipids of these rice brans comprised mainly TAG (80.6–86.0 wt.%), free FA (4.2–9.0 wt.%), and phospholipids (5.5–6.7 wt.%), whilst other components were also detected in minor proportions (0.2–2.1 wt.%). The PL components included phosphatidyl choline (31.8–46.8 wt.%), phosphatidyl ethanolamine (25.0–38.9 wt.%) and phosphatidyl inositol (20.2–23.2 wt.%). Comparison of these different cultivars showed, with a few exceptions, no significant differences (P > 0.05) in FA distribution. FA distribution of TAG among the five cultivars was evident in the rice brans: unsaturated FA were predominantly concentrated at the sn-2 position and saturated FA primarily occupying the sn-1 or sn-3 position. These results suggest that the tocopherol content, lipid component, and FA distribution in rice brans are not dependent on the cultivation areas during the growing season.     

Proposal of Design Criteria for Gas Entrainment from Vortex Dimples Based on a Computational Fluid Dynamics Method

Design criteria for gas entrainments (GE) from the liquid surface in a fast breeder reactor system were proposed in this paper for the two types of GE phenomena from a vortex dimple based on a computational fluid dynamics (CFD) method. The first gas entrainment phenomenon is a gas core extension directly to the outlet piping level, which induces large amount of GE to the flow system. The second is continuous bubble detachments from the tip of the vortex dimple. Based on CFD calculations for elemental experiments of the surface vortex, local CFD non-dimensional numbers were defined as the design criteria to prevent GE. In conclusion, it was found that the CFD non-dimensional numbers are useful for the design parameters of GE prevention.     

Standardized evaluation of chemical compositions of LiTaO3 single crystals for SAW devices using the LFB ultrasonic material characterization system

The line-focus-beam ultrasonic material characterization (LIFB-UMC) system is applied to compare and evaluate tolerances provided independently for the Curie temperature T/sub C/ and lattice constant /spl alpha/ to evaluate commercial LiTaO/sub 3/ single crystals by measuring the Rayleigh-type leaky surface acoustic wave (LSAW) velocities V/sub LSAW/. The relationships between VLSAW, and T/sub C/ and /spl alpha/ measured by individual manufacturers were obtained experimentally using 42/spl deg/YX-LiTaO/sub 3/ wafers as specimens from three crystal manufacturers. In addition, the relationship between VLSAW and SH-type SAW velocities V/sub SAW/ that are actually used for the SAW device wafers was obtained through calculations, using the chemical composition dependences of the acoustical physical constants for LiTaO/sub 3/ crystals reported previously. The result of a comparison between the T/sub C/ tolerance of /spl plusmn/3/spl deg/C and the /spl alpha/ tolerance of /spl plusmn/0.00002 nm through the common scale of VLSAW or VSAW demonstrated that the /spl alpha/ tolerance is 1.6 times larger than the T/sub C/ tolerance. Furthermore, we performed a standardized comparison of statistical data of T/sub C/ and /spl alpha/ for LiTaO/sub 3/ crystals grown by two manufacturers during 1999 and 2000, using VLSAW. The results clarified the differences of the average chemical compositions and of the chemical composition distributions among the crystal ingots between the two manufacturers. A guideline for the standardized evaluation procedure has been established for the SAW-device wafer specifications by the LFB-UMC system.