Impact of Serum Chemerin Levels on Liver Functional Reserves and Platelet Counts in Patients with Hepatocellular Carcinoma

Obesity-related metabolic abnormalities, including adipokine imbalance and chronic inflammation, are involved in liver carcinogenesis. Chemerin, a novel adipokine, plays a critical role in adipogenesis, energy metabolism, and inflammation. We evaluated the impact of serum chemerin levels on liver functional reserves in hepatocellular carcinoma (HCC) patients and on the recurrence and prognosis of HCC. This study included 44 patients with any stage of HCC who underwent curative treatment at Gifu Municipal Hospital (Gifu, Japan) between 2006 and 2007. Recurrence-free survival and overall survival were estimated using the Kaplan-Meier method. Serum albumin levels (Pearson’s correlation coefficient; r = 0.3110, p = 0.0399), platelet counts (r = 0.4159, p = 0.0050), and prothrombin times (r = 0.3775, p = 0.0115) were significantly correlated with serum chemerin levels in patients with HCC, and they were inversely correlated with Child-Pugh scores (r = −0.3732, p = 0.0126), serum alanine aminotransferase levels (r = −0.3864, p = 0.0105), and total bilirubin levels (r = −0.4023, p = 0.0068). Among these variables, a multiple comparison test identified that platelet counts and total bilirubin levels were associated with serum chemerin levels (p < 0.0083). No significant correlation was found between serum chemerin levels and recurrence-free survival (p = 0.3691) or overall survival (p = 0.7916). In HCC patients, serum chemerin concentrations were correlated with liver functional reserves and platelet counts, but not with recurrence or prognosis.     

Boroxine Nanotubes: Moisture‐Sensitive Morphological Transformation and Guest Release

Boroxines, (R‐BO)₃, which can be easily synthesized via a dehydration reaction of boronic acids, R–B(OH)₂, selectively self‐assemble in toluene into nanofibers, nanorods, nanotapes, and nanotubes, depending on the aromatic substituent (R). Spectroscopic measurements show that the nanotube consists of a J‐aggregate of the boroxine. Humidification converts the morphology from the nanotube to a sheet as a result of the hydrolysis of the boroxine components and subsequent molecular‐packing rearrangement from the J‐aggregate to an H‐aggregate. Such a transformation leads to the compulsive release of guest molecules encapsulated in the hollow cylinder of the nanotube. The hydrolysis and the molecular‐packing rearrangement described above are suppressed by coordination of pyridine to the boron atom, with the resulting moiety acting as a Lewis acid of the boroxine component. The pyridine‐coordinated nanotube is transformed into a helical coil by humidification. Guest release during the nanotube‐to‐helical‐coil transformation is much slower than during the nanotube‐to‐sheet transformation, but faster than from a nanotube that did not undergo morphological transformation. The storage and release of guest molecules from the boroxine nanotubes can be precisely controlled by adjusting the moisture level and the concentration of Lewis bases, such as amines.     

Preparation of ultrafine polyurethane fiber web by laser‐electrospinning combined with air blowing

Thermoplastic polyurethane fiber webs were prepared using a laser‐heated electrospinning process combined with air blowing. The effect of spinning conditions such as air flow rate and air temperature on fiber diameter and molecular weight was investigated. Although the average fiber diameter decreased with increased air flow rate at each air temperature, the diameter increased when the air flow rate was >15 NL min^?1. In addition, the fiber was comparatively thicker with an increase in the air temperature. The variation in the fiber diameter tends to increase with the air flow rate, and a reduction in the molecular weight of the fiber by thermal degradation was suppressed. The thinnest and most uniform fiber with a diameter of 0.9 µm and a diameter coefficient variation of 15% was obtained at an air temperature of 25°C under an air flow rate of 15 NL min^?1. This fiber also had a minimum of decreased molecular weight. POLYM. ENG. SCI., 54:2605–2609, 2014. © 2013 Society of Plastics Engineers     

A feasible core design of lead bismuth eutectic cooled CANDLE fast reactor

Among the innovative reactor concepts, CANDLE has several advantages over conventional reactor designs. However, when CANDLE is extended to long life, the clad integrity at high neutron fluence, the build-up of fission product gases, and the pressure drop for long cores pose technological challenges which have to be overcome. In this paper, we propose practically viable design procedures, such as recladding the entire fuel pins and replacement of different amounts of fuel at different radial positions, to ensure clad integrity and flat power distribution, respectively. We demonstrate the efficacy of such design procedures by calculations that are performed on a LBE CANDLE reactor. Our calculations show that for a reactor operation period of 3700 days the various reactor parameters are within the limits proposed by Japan Atomic Energy Agency (JAEA).     

Small-angle X-ray scattering studies on melting and recrystallization behaviors of poly(oxyethylene) crystallites in poly(d,l-lactide)/poly(oxyethylene) blends

Direct determination of the discrete distribution for crystalline lamellar thickness has been performed for poly(d,l-lactic acid)/poly(oxyethylene) (PDLLA/PEG) blends by conducting small-angle X-ray scattering (SAXS) measurements using synchrotron radiation. The PDLLA used was an random (racemic) copolymer of bio-based poly(l-lactic acid) (PLLA) and poly(d-lactic acid) (PDLA) with the lactide monomer ratio of l:d = 50:50. It is known that PLA is miscible with PEG in the amorphous state. In the current paper, we report comprehensive results on structural analyses of PDLLA/PEG blends in the course of heating and cooling process using SAXS to elucidate the change in the thickness distribution of the lamellae. As a consequence, it was found that the distribution of the lamellar thickness moves toward the larger value (in other words, lamellar thickening) as temperature approaches the melting point. Typically, the thickness distribution was dispersed in the range of 10–20 nm at room temperature and it changed toward 40 nm in the vicinity of the melting temperature. To the best of our knowledge, this is the first report of direct determination of the discrete distribution for the crystalline lamellar thickness and their in-situ changes in the course of the lamellar thickening process. As a result, the lamellar thickening was found to occur at much lower temperature for the blend samples with 10% and 20% of PDLLA contents as compared to the PEG 100% sample. This phenomenon can be ascribed to the melting point depression owing to the miscibility between PEG and PDLLA. Thereby, thinner lamellae were melted and thicker ones appeared at much lower temperature for the blends than for the PEG 100% sample. As for the average repeating distance (long period) of the lamellar stacks, an abrupt increase similar to the critical divergence was observed (from 25 nm to 50 nm) in the heating process. Not only for the melting behavior but also in the course of recrystallization, change in the lamellar-thickness distribution was uncovered, which shows strong hysteresis depending on what temperature the sample was cooled down from.     

Nanogrinding of multi-layered thin film amorphous Si solar panels

Nanogrinding was performed on the cross-sections of amorphous Si thin film solar panels, which are nanoscale multi-layer structures consisting of hard and brittle materials. The deformed structures of the panel cross-sectional surfaces after grinding were investigated using electron and atomic force microscopy. The nanogrinding results were compared with those obtained from polishing and nanoscratching, demonstrating that the three processes had produced consistent surface characteristics. Though nanogrinding produced nanometric surface roughness with ductile material removal, but could cause cracking, edge chipping and delamination at thin film interfaces. The results of this work are of value for developing the efficient machining process for thin film solar panels and other brittle multi-layer materials.