Conducting Domain Walls in Lithium Niobate Single Crystals

Ferroic materials play an increasingly important role in novel (nano)electronic devices. Recently, research on domain walls (DWs) receives a big boost by the discovery of DW conductivity (DWC) in BiFeO₃ and Pb(Zr_xTi_1‐x)O₃ ferroic thin films. Here, it is demonstrated that DWC is not restricted to thin films, but equally applies to millimeter‐thick wide‐bandgap, ferroic single crystals, such as LiNbO₃. In this material transport along DWs can be switched by super‐bandgap illumination and tuned by engineering the tilting angle of DWs with respect to the polar axis. The results are consistently obtained using conductive atomic force microscopy to locally map the DWC and macroscopic contacts, thereby in addition investigating the temperature dependence, DW transport activation energies, and relaxation behavior.     

Effects of a mastitis treatment strategy with or without on-farm testing

The etiology of mastitis is crucial information to use antimicrobials prudently for control and treatment. This study aimed to evaluate the effects of mastitis diagnosis and treatment strategies with on-farm testing, on cure, new intramammary infections (IMI), somatic cell count (SCC), and antimicrobial use, compared with farmers' current diagnosis and treatment strategies. The on-farm tests used, CHROMagar Mastitis (CHROMagar, Paris, France) and Minnesota Easy Culture System II Tri-plate (University of Minnesota, St. Paul, MN), both had etiological groups of IMI as result, being gram-positive growth, gram-negative growth, or culture negative. Two randomized controlled trials were conducted on 15 herds: trial 1 prospectively enrolled 155 cows with clinical mastitis, and trial 2 cross-sectionally included 78 cows with subclinical mastitis. In both trials, cows were randomly distributed over 3 equal-sized groups: a test group using CHROMagar, a test group using Minnesota, and a control group not using on-farm tests. Farmers decided whether or not to treat, and which antimicrobial treatment would be applied, using information available on the day of enrollment (control group), complemented with the on-farm test result 1 d after enrollment (both test groups). For clinical mastitis, an antimicrobial treatment was given in 58% of cases that used CHROMagar, in 80% that used Minnesota, and in 86% of the controls. For subclinical mastitis, an antimicrobial treatment was given in 50% of cases that used CHROMagar, in 54% that used Minnesota, and in 4% of the controls. Bacteriological cure rate of clinical mastitis was lowest in the CHROMagar group [odds ratio 0.18 (95%CI 0.03–0.99)] compared with the controls. Using the Minnesota on-farm test for subclinical mastitis diagnosis and treatments resulted in fewer new IMI on d 21 [odds ratio 0.06 (95%CI 0.00–0.74)] compared with the controls. Clinical cure rate, percentage of new IMI, and SCC on d 21 of clinical mastitis were comparable among the groups. Using on-farm tests in farmers' decision-making process resulted in more treatments in accordance with the etiology of mastitis than without on-farm testing. A diagnosis and treatment strategy with on-farm testing is advised in cows with clinical mastitis to enhance prudent antimicrobial use. For subclinical mastitis, however, on-farm testing may lead to an unacceptable increase in use of antimicrobials and thus should not be advised as the common approach.     

Al-doped zinc oxide nanocomposites with enhanced thermoelectric properties

ZnO is a promising high figure-of-merit (ZT) thermoelectric material for power harvesting from heat due to its high melting point, high electrical conductivity σ, and Seebeck coefficient α, but its practical use is limited by a high lattice thermal conductivity κ(L). Here, we report Al-containing ZnO nanocomposites with up to a factor of 20 lower κ(L) than non-nanostructured ZnO, while retaining bulklike α and σ. We show that enhanced phonon scattering promoted by Al-induced grain refinement and ZnAl(2)O(4) nanoprecipitates presages ultralow κ ～ 2 Wm( -1) K(-1) at 1000 K. The high α～ -300 μV K(-1) and high σ ～ 1-10(4) Ω(-1 )m(-1) result from an offsetting of the nanostructuring-induced mobility decrease by high, and nondegenerate, carrier concentrations obtained via excitation from shallow Al donor states. The resultant ZT ～ 0.44 at 1000 K is 50% higher than that for the best non-nanostructured counterpart material at the same temperature and holds promise for engineering advanced oxide-based high-ZT thermoelectrics for applications.     

Controlling spins with light

The interaction of sub-picosecond laser pulses with magnetically ordered materials has developed into an extremely exciting research topic in modern magnetism. From the discovery of sub-picosecond demagnetization over a decade ago to the recent demonstration of magnetization reversal by a single 40?fs laser pulse, the manipulation of spins by ultrashort laser pulses has become a fundamentally challenging topic with a potentially high impact for future spintronics, data storage and manipulation, and quantum computation. We have recently demonstrated that one can generate ultrashort and very strong (teslas) magnetic field pulses via the so-called inverse Faraday effect. Such optically induced magnetic field pulses provide unprecedented means for the generation, manipulation and coherent control of spins on very short time scales. The basic ideas behind these so-called opto-magnetic effects will be discussed and illustrated with recent results, demonstrating the various possibilities of this new field of femto-magnetism.     

Robust shape regression for supervised vessel segmentation and its application to coronary segmentation in CTA

This paper presents a vessel segmentation method which learns the geometry and appearance of vessels in medical images from annotated data and uses this knowledge to segment vessels in unseen images. Vessels are segmented in a coarse-to-fine fashion. First, the vessel boundaries are estimated with multivariate linear regression using image intensities sampled in a region of interest around an initialization curve. Subsequently, the position of the vessel boundary is refined with a robust nonlinear regression technique using intensity profiles sampled across the boundary of the rough segmentation and using information about plausible cross-sectional vessel shapes. The method was evaluated by quantitatively comparing segmentation results to manual annotations of 229 coronary arteries. On average the difference between the automatically obtained segmentations and manual contours was smaller than the inter-observer variability, which is an indicator that the method outperforms manual annotation. The method was also evaluated by using it for centerline refinement on 24 publicly available datasets of the Rotterdam Coronary Artery Evaluation Framework. Centerlines are extracted with an existing method and refined with the proposed method. This combination is currently ranked second out of 10 evaluated interactive centerline extraction methods. An additional qualitative expert evaluation in which 250 automatic segmentations were compared to manual segmentations showed that the automatically obtained contours were rated on average better than manual contours.     

HXT5 expression is determined by growth rates in Saccharomyces cerevisiae

In the yeast Saccharomyces cerevisiae, hexose transporter (Hxt) proteins transport glucose across the plasma membrane. The Hxt proteins are encoded by a multigene family with 20 members, of which Hxt1-4p and Hxt6-7p are the major hexose transporters. The remaining Hxt proteins have other or unknown functions. In this study, expression of HXT5 under different experimental set-ups is determined. In glucose-grown batch cultures, HXT5 is expressed prior to glucose depletion. Independent of the carbon source used in batch cultures, HXT5 is expressed after 24 h of growth and during growth on ethanol or glycerol, which indicates that growth on glucose is not necessary for expression of HXT5. Increasing the temperature or osmolarity of the growth medium also induces expression of HXT5. In fed-batch cultures, expression of HXT5 is only observed at low glucose consumption rates, independent of the extracellular glucose concentration. The only common parameter in these experiments is that an increase of HXT5 expression is accompanied by a decrease of the growth rate of cells. To determine whether HXT5 expression is determined by the growth rate, cells were grown in a nitrogen-limited continuous culture, which enables modulation of only the growth rate of cells. Indeed, HXT5 is expressed only at low dilution rates. Therefore, our results indicate that expression of HXT5 is regulated by growth rates of cells, rather than by extracellular glucose concentrations, as is the case for the major HXTs. A possible function for Hxt5p and factors responsible for increased expression of HXT5 upon low growth rates is discussed.     

Dietary fibre level and enzyme inclusion affect nutrient digestibility and excreta characteristics in grower pigs

An experiment was conducted with 12 grower pigs to determine the effects of (1) manipulating dietary neutral detergent fibre (NDF) level and (2) dietary inclusion of fibre‐degrading enzymes on nutrient digestibility and excreta characteristics in pigs. Four diets were formulated to contain three levels of NDF: 1, 66 g kg^?1 NDF (low fibre); 2, 121 g kg^?1 NDF (moderate fibre); 3, 222 g kg^?1 NDF (high fibre); 4, diet 3 plus 2.0 g kg^?1 enzyme. Increasing levels of dietary NDF linearly decreased dry matter and energy digestibilities (r² = 0.99, P < 0.05). Lowering dietary NDF from 222 to 121 g kg^?1 improved nitrogen digestibility by 13% (P < 0.01). Faecal production was decreased by 9% for each 1% decrease in dietary NDF content (r² = 0.99, P < 0.05). Inclusion of fibre‐degrading enzymes in the high‐fibre diet improved dry matter and energy digestibilities by 2 and 3% respectively, and reduced faecal production by 10% (P < 0.01). Faecal and manure (faeces plus urine) pH values from pigs fed the high‐fibre diet and the high‐fibre plus enzyme diet were lower than those from pigs fed the other experimental diets (P < 0.05). In conclusion, lowering the dietary NDF level or inclusion of fibre‐degrading enzymes in high‐fibre diets may offer relatively practical and easy methods for reducing waste production in pigs. © 2002 Society of Chemical Industry     

IPv6 Multicast Forwarding in RPL-Based Wireless Sensor Networks

In wireless sensor deployments, network layer multicast can be used to improve the bandwidth and energy efficiency for a variety of applications, such as service discovery or network management. However, despite efforts to adopt IPv6 in networks of constrained devices, multicast has been somewhat overlooked. The Multicast Forwarding Using Trickle (Trickle Multicast) internet draft is one of the most noteworthy efforts. The specification of the IPv6 routing protocol for low power and lossy networks (RPL) also attempts to address the area but leaves many questions unanswered. In this paper we highlight our concerns about both these approaches. Subsequently, we present our alternative mechanism, called stateless multicast RPL forwarding algorithm (SMRF), which addresses the aforementioned drawbacks. Having extended the TCP/IP engine of the Contiki embedded operating system to support both trickle multicast (TM) and SMRF, we present an in-depth comparison, backed by simulated evaluation as well as by experiments conducted on a multi-hop hardware testbed. Results demonstrate that SMRF achieves significant delay and energy efficiency improvements at the cost of a small increase in packet loss. The outcome of our hardware experiments show that simulation results were realistic. Lastly, we evaluate both algorithms in terms of code size and memory requirements, highlighting SMRF’s low implementation complexity. Both implementations have been made available to the community for adoption.     

Deducing the Fatigue Crack Growth Rates of Natural Flaws in Silicon Nitride Ceramics: Role of R‐Curves

Fatigue failure is a concern when high‐strength, high‐toughness silicon nitride ceramics are used in mechanical components and the growth of natural flaws will determine the usable upper bound strength. In this study a fracture resistance curve (R‐curve) model is incorporated into an established method for deducing natural flaw growth rates from a combination of strength and fatigue life data for smooth specimens. Experimental data for a commercial silicon nitride, SL200, were examined. When compared with results deduced using a constant fracture toughness model, the new method gives more physically realistic growth rate results. Specifically, by incorporating the R‐curve the deduced fatigue threshold is equal to the reported intrinsic toughness for crack propagation of 2.2 MPa√m, whereas the constant fracture toughness model gives a physically unrealistic threshold value. Furthermore, much better agreement is achieved with the growth rates measured using macroscopic compact‐tension specimens. Overall, it is concluded that the R‐curve effect should not be ignored when deducing the fatigue crack growth rates of natural flaws in high‐toughness silicon nitride ceramics.     

Lubrication Analysis of a Connecting-Rod Bearing in a High-Speed Engine. Part I: Rod and Bearing Deformation

Analysis was performed on a connecting rod assembly operating at 6,500 rpm. The analysis was based on the finite element method, which includes effects of interference fitted bearings and pre-loaded bolts. The rod inertia force associated with the gas pressure was found to have a significant effect on the variation of the rod bearing shape. The shape variation of a connecting rod assembly is commonly ignored in rod bearing analyses. Investigation of bearing deformation was conducted in order to evaluate the lubrication characteristics.