Exploiting 2D compressed sensing and information entropy for secure color image compression and encryption

Neural Computing and Applications - Compared to 1D compressed sensing (CS), 2D CS is more efficient for compressing the plaintext image from two directions, but security level of current 2D...     

基于LabVIEW的惯性测量单元信号采集及处理系统设计

利用LabVIEW设计了惯性测量单元信号采集及处理软件,主要包括串口通信、数据分离及信号处理等模块;串口通信模块采用VISA方式编程,建立了惯性测量单元与上位机之间的通信;根据惯性测量单元输出数据的格式,利用LabVIEW中的匹配模式函数分离出沿三轴向的加速度信号和角速率信号;设计了一种用于去除加速度信号中低频成份的数字滤波器;在建立的陀螺漂移模型基础上,分别进行小波基、小波分解层数、阈值函数及阈值估计方法等小波参数的选取.     

Adaptive load balancing algorithm for multiple homing mobile nodes

In places where mobile users can access multiple wireless networks simultaneously, a multipath scheduling algorithm can benefit the performance of wireless networks and improve the experience of mobile users. However, existing literature shows that it may not be the case, especially for TCP flows. According to early investigations, there are mainly two reasons that result in bad performance of TCP flows in wireless networks. One is the occurrence of out-of-order packets due to different delays in multiple paths. The other is the packet loss which is resulted from the limited bandwidth of wireless networks. To better exploit multipath scheduling for TCP flows, this paper presents a new scheduling algorithm named Adaptive Load Balancing Algorithm (ALBAM) to split traffic across multiple wireless links within the ISP infrastructure. Targeting at solving the two adverse impacts on TCP flows, ALBAM develops two techniques. Firstly, ALBAM takes advantage of the bursty nature of TCP flows and performs scheduling at the flowlet granularity where the packet interval is large enough to compensate for the different path delays. Secondly, ALBAM develops a Packet Number Estimation Algorithm (PNEA) to predict the buffer usage in each path. With PNEA, ALBAM can prevent buffer overflow and schedule the TCP flow to a less congested path before it suffers packet loss. Simulations show that ALBAM can provide better performance to TCP connections than its other counterparts.     

Selective ensemble extreme learning machine modeling of effluent quality in wastewater treatment plants

Real-time and reliable measurements of the effluent quality are essential to improve operating efficiency and reduce energy consumption for the wastewater treatment process.Due to the low accuracy and unstable performance of the traditional effluent quality measurements,we propose a selective ensemble extreme learning machine modeling method to enhance the effluent quality predictions.Extreme learning machine algorithm is inserted into a selective ensemble frame as the component model since it runs much faster and provides better generalization performance than other popular learning algorithms.Ensemble extreme learning machine models overcome variations in different trials of simulations for single model.Selective ensemble based on genetic algorithm is used to further exclude some bad components from all the available ensembles in order to reduce the computation complexity and improve the generalization performance.The proposed method is verified with the data from an industrial wastewater treatment plant,located in Shenyang,China.Experimental results show that the proposed method has relatively stronger generalization and higher accuracy than partial least square,neural network partial least square,single extreme learning machine and ensemble extreme learning machine model.     

以1,3-二(4-邻羟基苯亚胺次甲基)苯氧基丙烷为载体的铁离子(Ⅲ)电极的研究

以1,3-二(4-邻羟基苯亚胺次甲基)苯氧基丙烷为中性载体制备了PVC膜Fe3+离子选择性电极。该电极对Fe3+呈现出良好的选择性和近Nernst电位响应性能。电极斜率为21mV/dec,线性范围为3.0×10-5～1.0×10-1mol/L,检出限为1.0×10-5mol/L。采用交流阻抗技术研究了电极的响应机理,并将电极作为指示电极初步用于EDTA的电位滴定。     

橡胶行业标准废气治理技术方案

本文针对橡胶行业标准提出了密炼车间和压延/硫化车间的废气净化方案。废气治理设备预处理采用干式过滤净化废气。利用复合光催化主机对废气进行光氧催化和后处理,并注入低温等离子以降解异味污染物。蓄热式燃烧利用蓄热式热氧化焚烧炉RTO净化废气,三室RTO废气分解率高于99%,热回收率高于95%。     

STUDY ON THE VARIATION MECHANISM OF CARBON CONTENT OF LIQUID IRON IN MELTING GASIFIER

This paper studied the changing principles of carbon content in direct reduction iron (DRI) and liquid iron in the COREX melting gasifier. Under the normal working conditions of experimental equipment, liquid nitrogen was poured into the melting gasifier from its tuyere to cool down quickly. And then seven cross sections were made to study the carburization reaction and its characteristics of the solid iron and the liquid iron, and also the reaction of carbon between the slag and the metal. According to the results, the influences of the thickness of the semi-coke layer and the temperature on the carbon content of liquid iron in the COREX melting gasifier were confirmed.     

一起换流站交流滤波器保护跳闸故障诊断与仿真分析

介绍了±800 kV某特高压换流站一起因电流互感器绕组绝缘破损导致小组交流滤波器跳闸故障,从故障录波波形入手深入剖析了此次故障的原因,并阐述了详细故障处理过程。通过对互感器不同负载情况下工频、高频电流波形变化情况进行仿真,复现了现场工况波形,验证了故障分析结果的正确性,同时对此次故障暴露出的问题提出了针对性意见和建议,为换流站后续验收及运行维护提供了参考和借鉴。     

Revealing Microstructural,Textural, and Hardness Evolution of Ti–6Al–4V Sheet Cooled From Sub β-Transus Temperature at Different Rates

Metallurgical and Materials Transactions A - A hot-rolled Ti–6Al–4V sheet was annealed at 960 °C (sub β-transus temperature) and then subjected to different coolings [in water...     

镁基复合材料微区力学状态的有限元分析

弹性变形范围内,在采用三维有限元模型分析了颗粒增强Mg基复合材料(PRMMCs)中,颗粒的分布形态对材料微区力学状态的影响。结果表明,在保持颗粒长径比(2:1)和颗粒间距(d)不变的情况下,随着θ的变化,不存在颗粒断裂的危险,材料的主要失效方式为界面脱离和基体开裂。增强体相对夹角θ=15o时的结果优于其它情况,这更有利于充分发挥材料的性能。