A comparison between the enhanced mass transfer in boundary and pressure driven oscillatory flow

Mass transport in pulsating flow devices using either moving boundaries or oscillating imposed pressure drops are compared with each other by means of a calculation using a simple model. We conclude that there is no difference between the two configurations as long as one is interested only in the power required to move the fluid for the convective mass transport achieved. However, the boundary driven configuration is more efficient if the power is divided by the total mass transport where both the diffusive and convective parts are taken into account, the boundary driven configuration is more efficient. The amplitude of the piston stroke in the pressure driven configuration and the amplitude in the boundary driven case are assumed to be the same, and the inertia of the moving devices themselves are ignored in this calculation.     

Cognitive-behavioral therapy and relationship therapy in the treatment of children referred for antisocial behavior.

112 children (aged 7-13 yrs) were randomly assigned to one of three treatments: problem-solving skills training (PSST), problem-solving skills training with in vivo practice (PSST-P), which included therapeutically planned activities to extend training to settings outside of treatment, or client-centered relationship therapy (RT). PSST and PSST-P children showed significantly greater reductions in antisocial behavior and overall behavior problems, and greater increases in prosocial behavior than RT children. These effects were evident on measures obtained immediately after treatment and at a 1-year follow-up, and on measures of child performance at home and at school. PSST-P children showed greater changes than PSST children on measures of functioning at school at posttreatment, but these differences were no longer evident at follow-up. Children in both PSST conditions showed significant reductions in deviant behavior and improvements in prosocial behavior from pretreatment to follow-up, whereas RT children tended to remain at their pretreatment level of functioning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Microscopical studies of water/flour systems

Summary Wheat flour particles sprinkled on a water surface form strands which are visible in the light microscope. These strands form aggregates by means of mechanical forces which show viscoelastic behaviour. Amino acid analysis of both the protein strands and the aggregates formed shows that they consist of gluten protein. The formation of the protein strands occurs at the air/water interface and results from the action of a protein film which spreads around the flour particles.

---

Mikroskopische Untersuchungen von Mehl/Wasser-Systemen

Zusammenfassung Weizenmehlpartikel, die auf Wasser gestreut werden, bilden lichtmikroskopisch sichtbare Stränge aus. Durch mechanische Beanspruchung lassen sich these Stränge zu Aggregaten zusammenfassen, die visco-elastisches Verhalten zeigen. Die Aminosäureanalyse sowohl der Proteinstrange wie auch der daraus gebildeten Aggregate zeigt, daß es sich dabei um Kleberprotein handelt. Die Proteinfäden entstehen an der Wasser-Luft-Grenzflache als Folge eines spreitenden Proteinfilms, der sich um die Mehlpartikel herum ausbreitet.

     

Betriebsvereinbarung contra BDSG?

Ob Betriebsvereinbarungen im Sinne des § 4 Abs. 1 BDSG eine „andere Rechtsvorschrift” sind und damit die Regelungen des BDSG einschr?nken dürfen, geh?rt zu den Standardfragen des praktischen Arbeitnehmerdatenschutzes. Die Autoren befürworten eine weite betriebliche Regelungskompetenz, beschr?nken diese aber zum Schutz der Arbeitnehmer durch eine Reihe datenschutzrechtlicher Mindestanforderungen, die Betriebsvereinbarungen einzuhalten haben.     

Information Population of an Integrated Construction Management System

This paper discusses the future requirements of integrated construction management systems and the need to support the management of large volumes of information on several levels. The solution proposes a combination of an efficient user interface and methods to partially automate the creation of the required information through access to stored information from past projects. The research follows the path being established for integrated construction management systems that rely on a standard representation of the industry's information requirements. By exploring the comprehensive aspects of construction planning for an integrated construction management system, the research demonstrates the usefulness of applying sound information representation structures. Through the application of case-based reasoning, the research advances the concepts of planning tools as they apply to integrated systems. The resulting prototype construction management system has the primary characteristic of assisting the user in the manipulation of information in order to generate the initial information requirements of an integrated construction management system.     

Control of free-radical emulsion polymerization of methyl methacrylate by oxygen injection. II. Experimental study

Oxygen injection has been proposed and experimentally demonstrated as an effective control measure for limiting the rate of heat release and altering the rate of polymerization in emulsion processes. A detailed mathematical model has been previously developed to describe the system behavior with and without oxygen injection. A simple lab scale apparatus was constructed and run extensively. Only trace quantities of oxygen are needed to inhibit the reaction completely. The facile response makes this method attractive for fast temperature control. However, because of the rapid penetration of dissolved oxygen into the polymer particles, growing radical chains are terminated prematurely, lowering product molecular weights. To minimize this detrimental effect, pulsed oxygen control is used and extensive experimental work was performed to determine the effects of controller set points on molecular weight. Moderate oxygen flows and moderate set point temperatures are found to give the optimal response without significant lowering of the final molecular weight. Injected quantities agree well with the order-of-magnitude sparging calculations needed to completely stop initiation. However, complete agreement between model simulations and experimental results was not reached due to an unmeasured loss of monomer from the reactor. Chain transfer to monomer is found to be important in modeling the polymer molecular weight. It has, however, a negligible effect on the reaction rate.     

Evaluating and monitoring nucleation and growth in copper foil

The electrodeposition of copper foil for use in electronic materials applications is a complex and demanding process. The specific aspects of producing and controlling the structure-property-performance requirements of the foil are important because of the stringent demands placed on their use in printed circuit boards and similar products. In this paper, a brief review of the electrodeposition process for raw copper foil is presented. Since electrolyte additives play such a significant role in the copper-depositionprocess, the effects of two essential additives, chloride ion and an organic (e.g., glue or gelatine), on the foil are described. Also, the influence of other operating parameters on the initial nucleation, growth, and subsequent electrocrystallization are discussed. Selected characterization methods, such as polarization and scanning electron micrography techniques, are described as a means of monitoring the process, but universally accepted methods of evaluating and controlling the additives and foil quality during electrolysis are still being sought.     

Reliability Potential Of Epoxy Based Encapsulants For Automotive Applications

Automotive under-the-hood electronics often have to withstand temperatures up to 175 °C in combination with harsh environment conditions. This paper gives an overview about the reliability potential of epoxy based encapsulants for automotive applications. Therefore the resistance of epoxy molding compound against typical automotive fluids at temperature of use is analyzed. Six epoxy molding compounds available on the market, showing high temperature automotive potential have been carefully selected to undergo a media resistance testing. For this purpose a dedicated mold tool has been designed and manufactured to prepare these encapsulants for material testing. Thermo-mechanical, mechanical and thermal properties had been determined in initial state directly after molding and after storage in aggressive fluids typical for automotive applications as e.g. gas oil, automatic transmission fluid (ATF), brake fluid or accumulator acid at the respective temperature of use.