The determination of polymer additive effects in a spherilene process HDPE matrix upon water carry-over in water quenched,cast film extrusion

A test method useful in determining the effects of polymer additives upon water carry-over (WCO) in water quenched, cast film extrusion is presented. Data from this test is obtained on film specimens based in a Spherilene process HDPE resin individually doped with 250 and 500 ppm of six various primary and secondary antioxidants and acid scavengers. Water contact angles and film surface tension data is also presented. The WCO test is reproducible and data may be applied to commercial production. Different additives that carry out the same function in the polymer may have greatly varying WCO properties; these differences are not detected by equilibrium goniometry.     

Consumer preference not to choose: Methodological and policy implications

Residential consumers remain reluctant to choose new electricity suppliers. Even the most successful jurisdictions, four US states and other countries, have had to adopt extensive consumer education procedures that serve largely to confirm that choosing electricity suppliers is daunting. Electricity is not unique in this respect; numerous studies find that consumers are generally reluctant to switch brands, even when they are well-informed about product characteristics. If consumers prefer not to choose, opening regulated markets can reduce welfare, even for some consumers who do switch, as the incumbent can exploit this preference by raising price above the formerly regulated level. Policies to open markets might be successful even if limited to industrial and commercial customers, with residential prices based on those in nominally competitive wholesale markets.     

Rainbow smelt population responses to species invasions and change in environmental condition

Invasive species can cause major disruptions in native food webs, yet the impact of species introductions and whether they will become invasive appears to be context-dependent. Rainbow smelt and alewife co-exist as invasive species in the Laurentian Great Lakes and as native species on the Atlantic coast of North America, but in Lake Champlain rainbow smelt is the dominant native forage fish and alewife are invasive. Alewife became abundant by 2007, providing an opportunity to explore the dynamics of these two species in a system where only one is invasive. We used data from a 28-year forage fish survey to compare demographics of rainbow smelt populations in three basins of Lake Champlain with different volumes, nutrient levels, and predator abundances. Rainbow smelt catch-per-unit-effort (CPUE) remained constant in the large, deep Main Lake before and after alewife invaded, but decreased in the two smaller basins. Declines were primarily a result of increased age-0 and age-1 mortality. Predation by top piscivores, system productivity, and competition for resources alone could not explain the patterns in CPUE across the basins. The mechanisms that allow alewife and rainbow smelt to co-exist could be related to system volume and oxythermal habitat availability, and may explain why the two species do not negatively affect each other in the Great Lakes. Summer hypoxia in the smaller basins could force individuals into smaller habitat volumes with higher densities of competitors and cannibalistic adult rainbow smelt. Habitat availability may mediate the impact of invasive alewife on native rainbow smelt.     

Population effect of a large‐scale stream restoration effort on Chinook salmon in the Pahsimeroi River,Idaho

Stream habitat restoration is an important tool for fisheries management in impaired lotic systems. Although small‐scale benefits of stream habitat restoration are commonly investigated, it is difficult to demonstrate population effects. The Pahsimeroi River Chinook salmon Oncorhynchus tshawytscha population was previously restricted to the lower portion of the river by multiple irrigation structures. To address fish passage issues, a combination of restoration projects was initiated including barrier removals, instream flow enhancements and installation of fish screens on diversions. The largest barrier was removed in 2009, more than doubling the amount of accessible linear habitat. We hypothesized restoration efforts would expand the distribution of spawning salmon in the Pahsimeroi River watershed, leading to a broader distribution of juveniles. We also hypothesized a broader juvenile distribution would have population effects by reducing the prevalence of density‐dependent growth and survival. Redds were documented in newly accessible habitat immediately following barrier removal and accounted for a median of 42% of all redds in the Pahsimeroi River watershed during 2009–2015. Snorkel surveys also documented juvenile rearing in newly accessible habitat. Juvenile productivity increased from a median of 64 smolts/female spawner for brood years 2002–2008 to 99 smolts/female spawner for brood years 2009–2014. Overall, results suggested increased habitat accessibility in the Pahsimeroi River broadened the distribution of spawning adult and rearing juvenile salmon and reduced the effects of density‐dependent survival. Large‐scale stream restoration efforts can have a population effect. Despite the large‐scale effort and response, habitat restoration alone is likely not sufficient to restore this population.     

Na+ and/or Cl− Toxicities Determine Salt Sensitivity in Soybean (Glycine max (L.) Merr.), Mungbean (Vigna radiata (L.) R. Wilczek), Cowpea (Vigna unguiculata (L.) Walp.), and Common Bean (Phaseolus vulgaris L.)

Grain legumes are important crops, but they are salt sensitive. This research dissected the responses of four (sub)tropical grain legumes to ionic components (Na⁺ and/or Cl⁻) of salt stress. Soybean, mungbean, cowpea, and common bean were subjected to NaCl, Na⁺ salts (without Cl⁻), Cl⁻ salts (without Na⁺), and a “high cation” negative control for 57 days. Growth, leaf gas exchange, and tissue ion concentrations were assessed at different growing stages. For soybean, NaCl and Na⁺ salts impaired seed dry mass (30% of control), more so than Cl⁻ salts (60% of control). All treatments impaired mungbean growth, with NaCl and Cl⁻ salt treatments affecting seed dry mass the most (2% of control). For cowpea, NaCl had the greatest adverse impact on seed dry mass (20% of control), while Na⁺ salts and Cl⁻ salts had similar intermediate effects (~45% of control). For common bean, NaCl had the greatest adverse effect on seed dry mass (4% of control), while Na⁺ salts and Cl⁻ salts impaired seed dry mass to a lesser extent (~45% of control). NaCl and Na⁺ salts (without Cl⁻) affected the photosynthesis (P_n) of soybean more than Cl⁻ salts (without Na⁺) (50% of control), while the reverse was true for mungbean. Na⁺ salts (without Cl⁻), Cl⁻ salts (without Na⁺), and NaCl had similar adverse effects on P_n of cowpea and common bean (~70% of control). In conclusion, salt sensitivity is predominantly determined by Na⁺ toxicity in soybean, Cl⁻ toxicity in mungbean, and both Na⁺ and Cl⁻ toxicity in cowpea and common bean.     

Tribology of WC/C coatings for use in oil-less piston-type compressors

Compressors are being required to operate at increasingly severe conditions in order to increase efficiency, and with the transition from CFC to HFC and natural refrigerants, protective ferrous chloride films have been eliminated. To recover lost wear resistance and transition to oil-less operation, greater protection is sought through the application of hard coatings with enhanced tribological properties. Controlled reciprocating pin-on-disk experiments imitating the wrist pin-connecting rod interface were performed using a High Pressure Tribometer under unlubricated conditions. Specimens used for these experiments included WC/C coated cylindrical 52100 steel wrist pins and uncoated cast iron disks. The performance of WC/C with temperature variation as well as running-in characteristics were evaluated using surface profilometry and scanning electron microscopy. It was found that steady-state friction coefficients decreased with increasing temperature while friction coefficients increased during the running-in period. Also, wear decreased from testing in room temperature up to 80 °C and beyond that, increased due to unstable running-in. Based on the research presented in this work, hard coatings have the potential to replace oil in future compressors.     

Structure–property relationships for sulfonated poly(butylene terephthalate)

Structure–property relationships have been developed for sulfonated poly(butylene terephthalate) copolymers. The compositional variables investigated were sulfonate content, molecular weight, and polymer endgroup composition, and the fundamental polymer properties evaluated were melt viscosity, crystallization kinetics, and impact strength. It was found that all compositional variables significantly affect all of the polymer properties of interest. The most interesting effect is the influence of polymer endgroup composition on polymer properties. The trends indicate that the carboxylic acid endgroups form intermolecular interactions with sodium sulfonate groups, resulting in a decrease in the strength of intermolecular ionic interactions between sodium sulfonate groups. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4662–4771, 2006     

Catalytic Materials for High-Temperature Combustion

Catalytic combustion, as an alternative to conventional thermal combustion, has received considerable attention during the past decade. Research efforts have been promoted by the need to meet governmental demands concerning pollution and the wish to use energy sources more efficiently. The two main advantages offered by catalytic combustors over flame combustors apply to these goals:

1. Catalytic combustion can be carried out over a wide range of fuel concentrations in air and at low temperatures.
2. These low temperatures result in attaining NO, emission levels substantially lower than possible with conventional combustors.

     

The effect of the third invariant on the strength and failure of boron carbide and silicon carbide

This article presents new test data to assess the effect the third invariant has on the strength and failure of two ceramic materials: boron carbide and silicon carbide. Two experimental techniques are used: the Brazilian test that produces a biaxial state of stress, and a new technique that uses a high-pressure confinement vessel to load a specially designed dumbbell specimen in triaxial extension. The dumbbell geometry provides two important advantages over the typically used cylindrical specimen: no adhesive is required to bond the specimen to the load cell because the dumbbell geometry naturally takes the specimen into tension, and any loading asymmetries are essentially eliminated due to the axisymmetric geometry. The results show that when the stress state is on the tensile meridian the equivalent stress at failure is constant, independent of the hydrostatic pressure. The average equivalent stress at failure is for boron carbide and for silicon carbide. The Brazilian test was only performed on boron carbide and failed at , much higher than when on the tensile meridian () indicating that the effect of the third invariant is significant (because of the difference in the failure strength) and must be accounted for to accurately predict when failure will occur.