Accumulation and elimination profiles of paralytic shellfish poison in the short-necked clam Tapes japonica fed with the toxic dinoflagellate Gymnodinium catenatum

The paralytic shellfish poison (PSP)-producing dinoflagellate Gymnodinium catenatum (Gc) was fed to the short-necked clam Tapes japonica, and the accumulation, transformation and elimination profiles of PSP were investigated by means of high-performance liquid chromatography with postcolumn fluorescence derivatization (HPLC-FLD). The short-necked clams ingested most of the Gc cells (4 x 10(6) cells) supplied as a bolus at the beginning of the experiment, and accumulated a maximal amount of toxin (181 nmol/10 clams) after 12 hr. The rate of toxin accumulation at that time was 16%, which rapidly decreased thereafter. During the rearing period, a variation in toxin composition, derived presumably from the transformation of toxin analogues in the clams, was observed, including a reversal of the ratio of C2 to C1, and the appearance of carbamate (gonyautoxin (GTX) 2, 3) and decarbamoyl (dc) derivatives (decarbamoylsaxitoxin (dcSTX) and dcGTX2, 3), which were undetectable in Gc cells. The total amount of toxin contained in clams and residue (remaining Gc cells and/or excrement in the rearing tank) gradually declined, and only about 1% of the supplied toxin was detected at the end of the experiment.     

Characteristic Property of Low Bitterness in Protein Hydrolysates by a Novel Soybean Protease D3

ABSTRACT:  Enzymatic hydrolysis is 1 means of improving the functional properties of food protein; however, in most cases, bitter peptides are generated by such treatment, and the resulting product is therefore not acceptable as a food ingredient. We have already reported a novel cysteine protease, D3, purified from germinating soybean cotyledons. Because of its substrate specificities, most hydrophobic amino acid residues in the hydrolysate are presumed not to be located at the peptide termini. It was therefore expected that protein hydrolysate by protease D3 would taste less bitter than other enzymatic hydrolysates. The objective of this study was to demonstrate the low bitterness of protein hydrolysates by protease D3. For that purpose, soy protein and casein hydrolysates were prepared with treatment of protease D3, subtilisin, pepsin, trypsin, and thermolysin, respectively. The bitterness of these hydrolysates was evaluated by measuring points of subjective equality (PSE). The PSE value demonstrated that the protein hydrolysates by protease D3 were significantly less bitter than the other enzymatic hydrolysates, indicating that the products had a taste mild enough to be acceptable as a less-bitter peptide food ingredient. These results suggested that a prominent feature of protease D3 was its capacity to produce less-bitter peptides. Therefore, it is thought that protease D3 could be applied to produce protein hydrolysates for use as ingredients in a variety of food products.     

Cytokine responses of human intestinal epithelial-like Caco-2 cells to the nonpathogenic bacterium Bacillus subtilis (natto)

Intestinal epithelial cells produce cytokines in response to pathogenic bacteria. However, cellular responses of these cells to nonpathogenic strains, such as Bacillus subtilis, are yet to be determined. In this study, we investigate whether epithelial-like human colon carcinoma Caco-2 cells produce cytokines in response to B. subtilis or B. subtilis (natto). The latter strain is utilized for manufacturing the fermented soy food "natto". Live cells of nonpathogenic B. subtilis JCM 1465(T), B. subtilis (natto) and E. coli JCM 1649(T), as well as pathogenic S. enteritidis JCM 1652 and P. aeruginosa JCM 5516 strains, induced secretion of interleukin-6 (IL-6) and/or IL-8, but not IL-7, IL-15 or tumor necrosis factor alpha (TNF-alpha). Transepithelial electrical resistance (TER) of Caco-2 cell monolayers cultured with E. coli, S. enteritidis or P. aeruginosa decreased more rapidly than that of cells cultured with B. subtilis or B. subtilis (natto). The amounts of cytokine induced by B. subtilis (natto) cells were strain-dependent. Moreover, B. subtilis (natto) cells subjected to hydrochloric acid treatment, but not autoclaving, induced a higher secretion of IL-6 and IL-8 than intact cells. Tyrosine kinase inhibitors, including AG126 and genistein, suppressed cytokine secretion. Our results suggest that the nonpathogenic B. subtilis (natto) bacterium induces cytokine responses in intestinal epithelial cells via activation of an intracellular signaling pathway, such as that of nuclear factor-kappa B (NF-kappaB).     

Synthesis of nanoporous copper by dealloying of Al-Cu-Mg amorphous alloys in acidic solution: The effect of nickel

Dealloying of Al-Cu-Mg based amorphous alloys in 1 M HCl solution and the effect of a minor amount of Ni in the precursor alloy were explored. A crystalline, Cu-rich, nanoporous structure with a pore diameter of 10–30 nm was formed as a result of the selective dissolution of Al and Mg and the reorganization of the remaining Cu. The entire specimen was fully dealloyed after prolonged exposure to a HCl solution. The nanoporous structure is finer (e.g. 10 nm) in the alloy containing Ni, likely because Ni suppresses the surface diffusion of Cu. The decrease in surface diffusion, in turn, suppresses the coarsening of the ligaments in the dealloyed layer enabling tunable porosity development. Electrochemical reactivity after the synthesis of nanoporous Cu was enhanced by a factor of 150 with Ni and 50 without Ni compared to a planar Cu electrode of the same overall dimensions.     

Intelligent combinatorial auctions of decentralized task assignment for AGV with multiple loading capacity

The need to have an efficient transportation system has attracted worldwide attention. Although there is increasing demand to implement distributed control system for industrial applications, there is still an unexplored potential of deploying distributed transportation system. This paper focuses on dynamic assignment of transportation requests to a fleet of vehicles in real time. We introduce an improved combinatorial auction methodology to accommodate the distributed task assignment procedure. Based on a multiagent architecture, each vehicle is represented by an intelligent agent that bids for task and plans its own schedule. On the other hand, the auctioneer has the objective of minimizing transportation tardiness. An automated guided vehicle (AGV) has been selected as the case study, and numerical experiments have been carried out. The result obtained shows that the improved task assignment approach is able to produce performance competitive to a conventional task assignment. © 2013 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Synthetic Molecular Gear Based on Double-Decker Porphyrin Complexes

New rotary molecular machines (1 and 2) were synthetically constructed from two distinct porphyrin-based rotors, a cerium(IV) bis(porphyrinate)s double-decker (CeDD) and a porphyrinatorhodium(III)-based rotor. These rotors are adjacently mounted on rotational axes aligned to near vertical as resembling the bevel-gear-shaped structure. Structural study using NMR analysis reveals that these distinct rotors are connected through a coordination bond between rhodium(III) and a pyridyl group. At temperature from 193 to 393 K, each rotor represents rotational motion driven by heat fluctuation without decomposition into the corresponding precursors in dichloromethane-d ₂ and tetrachloroethane-d ₄. Importantly, the mechanical interaction between the teeth of these rotors is strongly dependent on the central metal atom in a DD rotor and the teeth structure in a porphyrinatorhodium(III)-based rotor. Understanding such relationship between the chemical structures and mechanical interaction is of importance for generating cooperative motion in the hybrid machinery system.     

Influence of water content in sub-flooring materials using adhesive on chemical compounds emission

Indoor air pollution is caused predominantly by emission of primary pollutants from building materials or finishing materials. Recently, there has been increasing interest in the new secondary pollutants caused by chemical reaction of the primary pollutants. In this study, the pollutants emitted from poly(vinyl chloride) (PVC) flooring material were measured, and 2-ethyl-1-hexanol (2E1H) and volatile organic compounds (VOCs) emitted from composite building materials made of PVC flooring material used as a self-leveling flooring were measured to identify the mechanism of emission of 2E1H. The moisture sorption isotherm was measured with a Magnetic Suspension Balance to examine the moisture content of the self-leveling flooring material and its effect on emission of 2E1H. 2E1H was emitted from the PVC flooring material through hydrolysis or oxidation of di-2-ethylhexyl phthalate (DEHP). The composite building material including the self-leveling flooring material emitted more 2E1H through hydrolysis over time. It was determined that liquid prevails in the self-leveling flooring material when the water content is higher than 4% and vapor prevails when the water content is lower than 4%. The prevailing liquid in the flooring material contributes to the increased emission of 2E1H and the prevailing vapor in the material did not cause increase in emission of 2E1H. It is considered that control of water in the self-leveling flooring material or concrete slab is very important in order to inhibit emission of 2E1H through hydrolysis of DEHP on the floor.     

Properties of reactively sputtered IrOx for PZT electrode applications

Abstract

The use of IrO_x for electrodes in PbZr_xTi_1?xO₃ (PZT) capacitors for ferroelectric memory applications has proven to be advantageous in several respects. In comparison with Pt, IrO_x often exhibits improved fatigue and provides resistance to hydrogen induced degradation at elevated temperatures. Since IrO_x is often produced by sputtering in an oxygen containing environment, several forms of IrO_x can be produced depending on the process conditions. This work concentrates on an analysis of the DC reactive sputtering of IrO_x from an Ir metal target. As with other oxidizable metals, Ir exhibits a transition between metal and oxide mode sputtering when sputtered in oxygen containing atmospheres. Variations in the Ar/O₂ gas flow ratio were used to produce Ir and IrO_xfilms on both sides of the metal-to-oxide mode reactive sputtering transition. Changes in the IrO_x film properties were quantified by using a combination of metrics including X-ray diffraction, sheet resistance, and stress. It was found that the, IrO_x crystalline structure and other IrO_x properties could be directly related to the ferroelectric switching performance of PZT capacitors with IrO_xtop electrodes. A relationship between IrO_x deposition processes and resistance to etch induced damage of the ferroelectric properties was also observed.     

Decision-making in electrical appliance use in the home

This paper presents the results of a survey as well as an argument from the viewpoint of behavioral economics with the aim of clarifying how consumers make decisions about electrical appliance use in the home. A survey of consumers showed that most have little awareness of the energy efficiency of appliances, the price of the services produced by electrical appliances, or electricity rates. These findings indicate that price does not function as a signal in electricity consumption through electrical appliance use. Rather, we found that consumer decision-making in electricity consumption is dependent on the characteristics of the particular electrical appliances they use. Additionally, we argue that the payment system for home electricity consumption plays an important role in decision-making, causing biases due to aspects of human psychology discussed here in terms of satisficing and heuristics, payment decoupling, and budgeting. We conclude that decision-making about electrical appliance use and electricity consumption in the home is not always rational and is affected both by the particular characteristics of appliances and the payment system for electricity consumption along with human psychology.     

Heat transfer and flow characteristics of flow boiling of CO2‐oil mixtures in horizontal smooth and micro‐fin tubes

Experiments were carried out on the flow pattern, heat transfer, and pressure drop of flow boiling of pure CO₂ and CO₂‐oil mixtures in horizontal smooth and micro‐fin tubes. The smooth tube is a stainless steel tube with an inner diameter of 3.76 mm. The micro‐fin tube is a copper tube with a mean inner diameter of 3.75 mm. The experiments were carried out at mass velocities from 100 to 500 kg/(m²·s), saturation temperature of 10 °C, and the circulation ratio of lubricating oil (PAG) was from 0 to 1.0 mass%. Flow pattern observations mainly showed slug and wavy flow for the smooth tube, but annular flow for the micro‐fin tube. Compared with the flow patterns in the case of pure CO₂, an increase in frequency of slug occurrence in the slug flow region, and a decrease in the quantity of liquid at the top of the tube in the annular flow region were observed in the case of CO₂‐oil mixtures. With pure CO₂, the flow boiling heat transfer was dominated by nucleate boiling in the low vapor quality region, and the heat transfer coefficients for the micro‐fin tube were higher than those of the smooth tube. With CO₂‐oil mixtures, the flow boiling heat transfer was dominated by convective evaporation, especially in the high vapor quality region. In addition, the heat transfer coefficient decreased significantly when the oil circulation ratio was larger than 0.1 mass%. For the pressure drop characteristics, in the case of pure CO₂, the homogeneous flow model agreed with the experimental results within ±30% for the smooth tube. The pressure drops of the micro‐fin tube were 0–70% higher than those predicted with the homogeneous flow model, and the pressure drops increased for the high oil circulation ratio and high vapor quality conditions. The increases in the pressure drops were considered to be due to the increase in the thickness of the oil film and the decrease in the effective flow cross‐sectional area. © 2010 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20287