Validation of a wind erosion model for tailings basins: wind tunnel design and atmospheric boundary layer simulation

ABSTRACT

The article describes an original conceptual model that intends to explain the emission mechanism of Particulate Matter from the surfaces of tailing basins exposed to wind erosion. In order to estimate the site-specific parameters of the Emission Factors in the proposed model, the reproduction of the wind flow acting over the erodible surfaces becomes essential. Based on the parameters determined on site and assumed as project objectives, an Environmental Wind Tunnel has been designed to generate a part-depth Atmospheric Boundary Layer (ABL). The measurements performed in the tunnel proved the simulated wind profiles to be representative of the required ABL.     

Landsat 8 OLI satellite data for mapping of the Posidonia oceanica and benthic habitats of coastal ecosystems

The benthic seabeds and seagrass ecosystems, in particular the vulnerable Posidonia oceanica (PO), are increasingly threatened by climate change and other anthropogenic pressures. Along the 8000 km coastline of Italy, they are often poorly mapped and monitored to properly evaluate their health status. Thus to support these monitoring needs, the improved capabilities of the Landsat 8 Operational Land Imager (OLI) Earth Observation (EO) satellite system were tested for PO mapping by coupling its atmospherically corrected multispectral data with near-synchronous sea truth information. Two different approaches for the necessary atmospheric correction were exploited focusing on the Aerosol Optical Depth (AOD) and adjacency noise effects, which typically occur at land–sea interfaces. The general achievements demonstrated the effectiveness of High Resolution (HR) spectral responses captured by OLI sensor, for monitoring seagrass and sea beds in the optically complex Tyrrhenian shallow waters, with performance level dependent on the type of applied atmospheric pre-processing. The distribution of the PO leaf area index (LAI) on different substrates has been most effectively modelled using on purpose developed spectral indices. They were based on the coastal and blue-green OLI bands, atmospherically corrected using a recently introduced method for AOD retrieval, based on the Short Wave Infrared (SWIR) reflectance. The alternative correction method including a less effective AOD assessment but the removal of adjacency effects has proven its efficacy for improving the thematic discriminability of the seabed types characterized by different PO cover–substrate combinations.     

Joining and testing of alumina fibre reinforced YAG-ZrO2 matrix composites

Alumina (Nextel? 610) fibre reinforced YAG-ZrO₂ matrix composites were successfully joined by using different brazing alloys, metallic interlayers and a glass-ceramic. All joints were mechanically stable and free of cracks. Three commercial brazing alloys and a new alloy based on Ti/Cu/Al interlayers were selected to join these composites for applications in a non-oxidizing environment. A glass-ceramic based on SiO₂-Al₂O₃-CaO-MgO was developed in case the joined component needs to be oxidation resistant. To evaluate the thermal stability, all joined composites were aged up to 100 h in air at 550 °C for brazing joints or 850 °C and 930 °C for glass-ceramic joints. The mechanical strength was measured using single lap and four point bending tests before and after ageing. Four point bending tests on glass-ceramic joined samples showed an average joint strength of about 70 MPa which is 35% of as-received composites.     

Synthesis‐Gas Absorption under Real Process Conditions: Thermodynamic Aspects

The solubility of synthesis gas was measured in the temperature range of 100–300 °C and pressure range of 1.0–5.0 MPa in polar (2‐propanol) and nonpolar (n‐dodecane) solvents. Thermodynamic parameters of the absorption, such as the Henry constant, absorption enthalpy, and apparent activation energy of absorption, were calculated on the basis of the obtained results. The phase equilibrium was calculated by using the Soave‐Redlich‐Kwong cubic equation of state, which could be used to predict the optimal process conditions for liquid‐phase Fischer‐Tropsch reactions in different solvents.     

Wetting of SiC by Al-Ti alloys and joining by in-situ formation of interfacial Ti3Si(Al)C2

Two pressureless and reliable procedures for brazing SiC-based materials have been designed. The joining was obtained by the in-situ formation of a Ti₃Si(Al)C₂ MAX phase using simple Al-Ti interlayers. Wettability studies were conducted using several Al-Ti alloys in contact with SiC at 1500?°C. The interfacial microstructures and thermodynamic analysis demonstrated that liquid Al₃Ti in contact with SiC formed a well-bonded Ti₃Si(Al)C₂ interfacial layer. These findings guided the design of two joining methods: one consisted of the simple infiltration of Al₃Ti into the brazing seam, while an Al₃Ti paste/Ti/Al₃Ti paste interlayer assembly was designed for the second process. Sound interfaces without cracks were obtained in both processes. The average shear strength was very high, 296?MPa, for the infiltration method; the drawback was the presence of residual Al. Joining through Al₃Ti/Ti/Al₃Ti interlayers avoided the presence of low-temperature melting phases, with lower shear strength: 85 or 89?MPa depending on the testing method.     

Oncolytic Virotherapy and Microenvironment in Multiple Myeloma

Multiple myeloma (MM) is a hematologic malignancy characterized by the accumulation of bone marrow (BM) clonal plasma cells, which are strictly dependent on the microenvironment. Despite the improvement of MM survival with the use of new drugs, MM patients still relapse and become always refractory to the treatment. The development of new therapeutic strategies targeting both tumor and microenvironment cells are necessary. Oncolytic virotherapy represent a promising approach in cancer treatment due to tumor-specific oncolysis and activation of the immune system. Different types of human viruses were checked in preclinical MM models, and the use of several viruses are currently investigated in clinical trials in MM patients. More recently, the use of alternative non-human viruses has been also highlighted in preclinical studies. This strategy could avoid the antiviral immune response of the patients against human viruses due to vaccination or natural infections, which could invalid the efficiency of virotherapy approach. In this review, we explored the effects of the main oncolytic viruses, which act through both direct and indirect mechanisms targeting myeloma and microenvironment cells inducing an anti-MM response. The efficacy of the oncolytic virus-therapy in combination with other anti-MM drugs targeting the microenvironment has been also discussed.     

Atrial fibrillation and its complications in arterial hypertension: The potential preventive role of ω-3 polyunsaturated fatty acids

Atrial fibrillation (AF) is the most common type of arrhythmia in the general population with a prevalence that reaches one third of patients with arterial hypertension. Several risk factors frequently associated with hypertension predispose the myocardium to AF by inducing atrial inflammation and fibrosis and altering atrial electrical and mechanical characteristics. AF influences the quality of life of hypertensive patients since it increases incidence of stroke and other thromboembolic events, and mortality. Polyunsaturated fatty acids of the ω-3 family (ω-3 PUFA) have been demonstrated to be beneficial in cardiovascular disease prevention by reducing plasma lipids and blood pressure levels and decreasing the risk of sudden death. These fatty acids can act as potent anti-inflammatory and anti-arrhythmic agents. Many studies have investigated a possible preventive effect of ω-3 PUFA on incident AF reporting contradictory results. This article overviews the evidence currently available on this important topic and provides some conclusive remarks on the possibility that these fatty acids could be beneficial in hypertensive patients.