Rheology of Zirconia Suspensions in a Nonpolar Organic Medium

Three dispersants (stearic acid, oleic acid, and poly(12-hydroxystearic acid)) are compared for their ability to produce low-viscosity suspensions of zirconia in kerosene. Rheological measurements and sediment packing density measurements show that poly(12-hydroxystearic acid) is a better dispersant than stearic acid or oleic acid; this is explained in terms of the longer tail of the poly(12-hydroxystearic acid) surfactant molecule. The amount of dispersant can be optimized to reduce viscosity and yield point of the suspension, and to eliminate thixotropic hysteresis. The use of a dispersion medium of lower viscosity than the dispersant makes it easy to detect when complete monolayer coverage has been achieved. The loss of pseudoplasticity, brought about by a higher degree of deflocculation, can be recovered by increasing the volume fraction of solids of a suspension and this is beneficial in the plastic forming of ceramics. Rheological measurements showed that these suspensions reach a "critical state" above a critical shear stress (τ_c). This critical state is described by several parameters, i.e., the Bingham yield stress (τ_b), the plastic viscosity (ν_Pl), and the critical shear rate (γ_c), which are dependent on the volume fraction of solids.     

Pressure-infiltration processing of reinforced aluminum

Pressure infiltration of liquid metal is one of the most important processing routes for the production of aluminum-matrix composites having a self-supporting reinforcement phase. This article briefly examines the physical phenomena governing infiltration processes, to present practical guidelines derived from their analysis for optimization of the process and the materials produced. Engineering aspects that are pertinent to infiltration techniques, including preform preparation, process configurations, flow control, and innovative processes, are summarized.     

Use of the omentum in the treatment of chronic thoracic empyema

Thoracic empyema (development of suppuration in the thoracic cavity, usually after pneumonectomy) remains a serious complication which is difficult to treat. Failure of classical procedures (lavage-drainage) in the treatment of certain forms of pleural empyema (post-pulmonary resections), with or without associated fistula, led the authors to use the pedicled omental flaps filling material for the chronic empyema cavity. They report their experience (6 cases over a period of 4 years) and define the indications. Omentoplasty has a real place, next to myoplasty, in the therapeutic arsenal for chronic empyema due to its detersion capacity, particularly useful in a "septic" context and because of its volume which is usually sufficient in retracted cavities. The existence of an associated bronchial fistula, history of radiotherapy, posterolateral thoracostomy (sectioned latissimus dorsi) are additional reasons to prefer omentoplasty over myoplasty.     

Functional correction of renal defects in a mouse model for ARPKD through expression of the cloned wild-type Tg737 cDNA

Autosomal recessive polycystic kidney disease (ARPKD) is characterized by the formation of large collecting tubule and ductular cysts that often result in renal insufficiency within the first decade of life. Understanding the process leading to cyst formation will require the identification and characterization of genes involved in the etiology of this disease. In this regard, we previously described the generation of a mouse model (TgN737Rpw) for ARPKD and the cloning of a candidate gene. Here we show direct involvement of the Tg737 gene in collecting duct cyst formation by expressing the wild-type Tg737 cDNA as a transgene in TgN737Rpw mutants. In contrast to TgN737Rpw mutants, the "rescued" animals survive longer, have normal renal function and normal localization of the EGFr to the basolateral surfaces of collecting duct epithelium.     

Architectural Methodology Based on Intentional Configuration of Behaviors

Intelligence has been an object of study for a long time. Different architectures try to capture and reproduce these aspects into artificial systems (or agents), but there is still no agreement on how to integrate them into a general framework. With this objective in mind, we propose an architectural methodology based on the idea of intentional configuration of behaviors. Behavior‐producing modules are used as basic control components that are selected and modified dynamically according to the intentions of the agent. These intentions are influenced by the situation perceived, knowledge about the world, and internal variables that monitor the state of the agent. The architectural methodology preserves the emergence of functionality associated with the behavior‐based paradigm in the more abstract levels involved in configuring the behaviors. Validation of this architecture is done using a simulated world for mobile robots, in which the agent must deal with various goals such as managing its energy and its well‐being, finding targets, and acquiring knowledge about its environment. Fuzzy logic, a topologic map learning algorithm, and activation variables with a propagation mechanism are used to implement the architecture for this agent.     

Encephalopathy during oral treatment with bismuth salts

Side effects of orally administered bismuthic salts have been known for many years. Many systems are involved, including the digestive and urinary. The authors discuss a recently discovered effect on the central nervous system, termed "bismuth encephalopathy". In the light of the medical literature reviewed, two original aspects are stressed: the clinical symptoms are stereotyped and completely reversible, and the distribution of the disease is almost epidemic, being limited in time and space. The prodromes include confusion, asthenia, slowing of mental functions and disturbance of gait. The clinical picture is dominated by four major symptoms: confusion (again), ataxia, dysarthria and, above all, myoclonic jerks. In conclusion, various pathogenetic hypotheses are considered. The purpose of this study is to enable the general practitioner to detect the development of this condition early in treatment with oral bismuthic salts. Withdrawal of the medication always results in normalization of the patient's condition.     

基于分块技术的相位展开算法

对干涉相位图的相位展开是干涉合成孔径雷达处理过程中的重要步骤,也是干涉合成 孔径雷达理论与应用研究的难点所在.在充分利用干涉相位图中的干涉条纹信息的基础上,提出 了一种基于分块技术的相位展开算法.首先对干涉相位图做了分块处理,块是由干涉条纹线和图 像边界线组成的一个封闭的区域,在一个块内不存在相位跳跃,即在块内的相位展开已经完成. 在下一步对全图做相位展开时,再逐块进行.最后通过后处理技术进行错误校正.通过对真实数 据的实验和与传统方法的比较,证实了算法的有效性和稳定性．     

Comparison of polysaccharide degradations by dynamic high-pressure homogenization

The mechanical degradation of polysaccharides was investigated using dynamic high and ultra-high-pressure homogenization (HPH). The objectives were to reduce the molar mass of polymer chains, and simultaneously, the apparent and intrinsic viscosity of polysaccharides in solution. The influence of homogenization pressure (up to 200 MPa) and cycles was compared on polysaccharides with different physical and structure properties: namely, guar gum, hydroxyethylcellulose (HEC), sodium carboxymethylcellulose (Na-CMC), sodium alginate (Na-alginate) and gum arabic. HPH was applied on semi-dilute solutions. The apparent changes in molar mass, gyration radius and intrinsic viscosity were deduced from size exclusion chromatography coupled on-line with multi-angle laser light scattering, differential viscometer detector and differential refractive index detector (SEC/MALS/DV/DRI), while the evolution of the critical overlap concentration (C^∗) was obtained by viscosimetry. A method based on a succession of homogenization cycles and polymer pre-concentration steps was developed to determine the minimum molar mass achieved at constant pressure. Molar mass, and intrinsic viscosity were shown to fall simultaneously while logically C^∗ increased during HPH for all polysaccharides, except gum arabic, probably because of its globular and branched structure. This highlights that the differences of polysaccharide structures and conformation (linear, branched…) exhibit a stronger impact on HPH treatments than polymer charge or molar mass. Finally, via an empirical approach linking the decrease of both molar masses and viscosities, we have evidenced a specific scaling exponent that should characterize the flexibility of the treated polymer (i.e. its ability to be degraded by HPH).     

Free radical polymerization of ethyl methacrylate and ethyl α-hydroxy methacrylate: A computational approach to the propagation kinetics

The propagation kinetics of ethyl methacrylate (EMA) and ethyl α-hydroxy methacrylate (EHMA) has been subject to a computational study to understand their free radical polymerization (FRP) behavior in bulk and in solution using Density Functional Theory (DFT). The propagation of EHMA is studied in ethanol and toluene to assess the effect of hydrogen-bonding solvents on FRP of monomers with α-hydroxy functionality. Although EMA and EHMA resemble each other in structure, EHMA propagates faster in bulk due to the presence of intermolecular hydrogen-bonds, which tend to facilitate the approach of the propagating species. This falls in contrast with the experimentally observed lower propagation rates of EHMA in ethanol compared to toluene. Calculations show that the 2.28 rate acceleration in toluene is governed by the ratio of the pre-exponential factors, which reflect the entropies of activation, in both media. The polar protic solvent ethanol has a disruptive effect via hydrogen-bonding on the 6-membered ring shape of EHMA monomers thus decreasing the entropy of activation of the reaction. In the case of toluene, there are no special interactions with the hydrophobic solvent, the entropy of activation is higher than in ethanol.     

Elastomeric Electronic Skin for Prosthetic Tactile Sensation

This report demonstrates a wearable elastomer‐based electronic skin including resistive sensors for monitoring finger articulation and capacitive tactile pressure sensors that register distributed pressure along the entire length of the finger. Pressure sensitivity in the order of 0.001 to 0.01 kPa^?1 for pressures from 5 to 405 kPa, which includes much of the range of human physiological sensing, is achieved by implementing soft, compressible silicone foam as the dielectric and stretchable thin‐metal films. Integrating these sensors in a textile glove allows the decoupling of the strain and pressure cross‐sensitivity of the tactile sensors, enabling precise grasp analysis. The sensorized glove is implemented in a human‐in‐the‐loop system for controlling the grasp of objects, a critical step toward hand prosthesis with integrated sensing capabilities.