Properties of polycarbonate/acrylonitrile-butadiene-styrene blends

To help make a good polymer blend by melt blending, the properties of polycarbonate (PC)/acrylonitrile-butadiene-styrene (ABS) systems with various compositions have been investigated. As ABS is blended into PC to form a binary system, Brabender torque is reduced, a phenomenon that results in Improved processability of PC. With increasing ABS content, the mechanical properties of the blends such as tensile strength, modulus, hardness, and shrinkage decrease. However, with the variation of composition, Izod impact strength shows a maximum, while elongation at break exhibits a minimum. These phenomena are discussed with dynamic viscoelasticities and scanning electron microscopic morphological results. The value of ΔT_g(T_gβPC ? T_gβABS) is at its smallest when the ratio of PC to ABS is 90:10, However, the value rises with an increase in ABS because the butadiene content of the ABS hinders compatibility in the binary system. At the 90:10 composition, the damping height is optimal. In addition, the dispersed phase of the ABS is most ideal, absorbing the impact force and showing high impact strength. Composition ratios other than 90:10 present high damping as well as undesirable phase separation because of poor adhesion between two phases. As a result, the mechanical properties are reduced.     

Effects of titania content and plasma treatment on the interfacial adhesion mechanism of nano titania-hybridized polyimide and copper system

Nano-titania (TiO₂) incorporated into polyimide (PI) matrix can significantly enhance the adhesion strength for PI/TiO₂ hybrid film and copper system. Surface modifications by various plasma treatments (Ar, Ar/N₂ and Ar/O₂) were also applied in this study to improve the adhesion strength. The Ar/N₂ plasma treatment is regarded as the more effective way in promoting the adhesion strength. The maximum adhesion value of 9.53 N/cm was obtained for the PI/TiO₂-1 wt% hybrid film with Ar/N₂ plasma treatment. It is enhanced about 10 times as large as pristine PI. Furthermore, by Ar/O₂ plasma treatment, a weak boundary of copper oxide was formed at the interlayer between PI/TiO₂ hybrid film and copper which decreases the adhesion strength. The effects of plasma treatment and content of nanosized TiO₂ on the adhesion strength between PI/TiO₂ hybrid film and copper system were studied. Atomic force microscope and contact angle analyses were used to measure the changes in surface morphology and surface energy as a result of plasma treatment. Besides, the interfacial states of peeled-off polymer side and copper side were investigated by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Based on the result of XPS spectra, the peeled-off failure mode between PI/TiO₂ hybrid film and copper was proposed in this study.     

Properties of modified polyacrylonitrile membranes prepared by copolymerization with hydrophilic monomers for water–ethanol mixture separation

A new kind of terpolymer membrane was employed to separate a permselective water–alcohol mixture. This membrane was prepared via the copolymerization of acrylonitrile, sodium salt styrene sulfonic acid (SStSA), and hydroxyethyl methacrylate in dimethylsulfoxide with azobisisobutyronitrile as an initiator. The reaction mechanism, resultant structure, and polymer composition were confirmed by IR and elemental analysis. The effects of the feed composition on the polymer composition, mechanical properties, thermal properties, and degree of swelling were investigated. It was found that water permeated through the membrane preferentially in a water/alcohol system. The flux increased with the increase of SStSA, but the separation factor decreased drastically with higher SStSA. For a 50 wt % water–ethanol mixture, a flux of 0.65 kg/m² h and a separation factor of 212 were obtained at 30°C when the membrane containing the highest SStSA content was used. The capacities of the metal ions absorbed by the membranes were investigated in the study. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 244–250, 2003     

Annular ring slot antenna design with reconfigurable polarization

A microstrip‐fed conventional annular ring slot (ARS) antenna with linear polarization (LP) is initially studied. To generate two orthogonal degenerate modes for circular polarization (CP) radiations, two identical meandering perturbation slots (MPS) are symmetrically loaded into the ARS. By further incorporating a PIN diode switch across each MPS, the proposed antenna can switch between left‐hand CP (LHCP), right‐hand CP (RHCP), and LP. All three polarizations have shown good impedance bandwidth and broad CP bandwidth that can satisfy the wireless local area network (WLAN) 2.4‐GHz operating band (2400–2480 MHz). Furthermore, desirable gains of 1.8–2.0 dBi and 2.40–2.84 dBic are also exhibited at LP and LHCP/RHCP, respectively. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:110–120, 2016.     

A sensor-based feet motion recognition of graphical user interface controls

Motion sensing has now become one of the crucial parts of modern life. The tech products for entertainment create huge competition in the modern market, with the front runners such as game and handset manufacturers. Users can use their own bodies to control the systems without Conversational User Interfaces (CUIs) and Graph User Interfaces (GUIs). With many benefits, the technologies of NUI is getting more and more important, which also are usually accompanied by the sensor developments. Hence, system designers uses the sensors on the embedded platforms used to develop the system devices for different body movement control interfaces, such as using the gravitational sensor to control the systems or using touchscreen detection. However most of the body movement is restricted to the hand portion for the system platform, making it not as dynamic as the traditional monitor consoles. Thus, this restriction decreases the multitude and availability of controlling modes in system devices. In this study, a sensor-based gait recognition was proposed, in order to provide a novel natural user interface for control systems except the operating modes of gesture.     

PREACO: A fast ant colony optimization for codebook generation

This paper presents an effective and efficient method for speeding up ant colony optimization (ACO) in solving the codebook generation problem. The proposed method is inspired by the fact that many computations during the convergence process of ant-based algorithms are essentially redundant and thus can be eliminated to boost their convergence speed, especially for large and complex problems. To evaluate the performance of the proposed method, we compare it with several state-of-the-art metaheuristic algorithms. Our simulation results indicate that the proposed method can significantly reduce the computation time of ACO-based algorithms evaluated in this paper while at the same time providing results that match or outperform those ACO by itself can provide.     

Remote flood monitoring system based on plastic optical fibres and wireless motes

This paper summarises an effort in the development of a remote flood monitoring system based on plastic optical fibre (POF) sensors and a wireless mote network. The wireless mote, comprising of a network of MICA2DOT™ units, was used as a platform to monitor and record the signal from the POF sensors and transmit this information to a base station wirelessly. A prototype of the integrated wireless POF sensor unit has been constructed, rendering it possible to deploy the autonomous unit remotely at multiple monitoring points as required. A flood monitoring simulation was carried out in a 24 m × 10 m × 0.9 m wave basin where four of these wireless optical fibre mote sensors were used to detect the rising water level in the basin. The novelty of the work lies in the successful integration of the wireless platform to a POF-based liquid level sensor and the subsequent demonstration of the prototype of the system for the purposes of flood monitoring applications.The sensing principle of the POF sensor developed here is well-known and is based on the loss of total internal reflection of the optical signal as the sensor probe comes in contact with the liquid. Compared to optical fibre-based sensors reported previously in the literature, the probe profile used in this study differs in terms of its simplicity in design, while exhibiting an excellent signal intensity loss ratio without the need for additional attachments to the probe such as optical prisms. The tests carried out showed that the POF sensor is capable of detecting a variety of fluids. Exhibiting good signal stability, the sensor also detects the liquid level reliably when the liquid rises or falls to the predetermined level. The responsiveness of the optical fibre sensor was evaluated by simulating different rates at which the liquid rises by immersing the sensor tip into the liquid and vice-versa at various speeds ranging from 1 mm/min to 500 mm/min.     

An expert system for fault diagnosis in internal combustion engines using probability neural network

An expert system for fault diagnosis in internal combustion engines using adaptive order tracking technique and artificial neural networks is presented in this paper. The proposed system can be divided into two parts. In the first stage, the engine sound emission signals are recorded and treated as the tracking of frequency-varying bandpass signals. Ordered amplitudes can be calculated with a high-resolution adaptive filter algorithm. The vital features of signals with various fault conditions are obtained and displayed clearly by order figures. Then the sound energy diagram is utilized to normalize the features and reduce computation quantity. In the second stage, the artificial neural network is used to train the signal features and engine fault conditions. In order to verify the effect of the proposed probability neural network (PNN) in fault diagnosis, two conventional neural networks that included the back-propagation (BP) network and radial-basic function (RBF) network are compared with the proposed PNN network. The experimental results indicated that the proposed PNN network achieved the best performance in the present fault diagnosis system.     

3D strain mapping in rocks using digital volumetric speckle photography technique

Speckle photography technique is a versatile displacement/deformation mapping technique that can be applied to almost any material. It has its genesis in the laser speckle interferometry technique whereby the natural speckles created by illuminating an optically rough surface using a coherent laser beam are used as displacement gauging elements. It evolves into the white light speckle photography technique whereby a random pattern of any type is used as a displacement measurement transducer. With the advent of digital cameras and ubiquitous usage of computers, the digital version of the technique is developed. Up to now, the technique is essentially limited to 2D applications. Recently, we extended the technique into the 3D domain by using the volumetric imaging capabilities of CT or MRI. In this paper, we apply this technique to measuring the internal deformation of rocks. It so happens that certain rocks have natural density variation at various places such that when imaged by CT these impurities can be treated as 3D speckles. The elements of volumetric speckle photography technique are as follows. A reference volumetric image of the rock is recorded by a micro-CT scan and stored as a reference. Under load, the deformed CT image of the rock is also recorded. Both volume images are divided into subsets of certain voxel arrays. Each corresponding pair of the subsets is “compared” via a two-step 3D Fourier transform analysis. The result is a 3D map of displacement vectors representing the collective displacement experienced by all the speckles within the subset of voxels. The strain distribution of the entire rock specimen can then be calculated using appropriate displacement strain relations. The application of this technique to strain mapping of red sandstone and argillite rocks is presented.