用偏微分方程构造过渡面

用偏微分方程的构造曲面是一种新兴的方法，本文借若干算例说明如何用偏微分方程构造两已知曲面之间的过渡面。论文着重讨论用四阶方程构造一阶连续的过渡面。     

Nonlinear black-box modeling in system identification: a unified overview

A nonlinear black-box structure for a dynamical system is a model structure that is prepared to describe virtually any nonlinear dynamics. There has been considerable recent interest in this area, with structures based on neural networks, radial basis networks, wavelet networks and hinging hyperplanes, as well as wavelet-transform-based methods and models based on fuzzy sets and fuzzy rules. This paper describes all these approaches in a common framework, from a user's perspective. It focuses on what are the common features in the different approaches, the choices that have to be made and what considerations are relevant for a successful system-identification application of these techniques. It is pointed out that the nonlinear structures can be seen as a concatenation of a mapping form observed data to a regression vector and a nonlinear mapping from the regressor space to the output space. These mappings are discussed separately. The latter mapping is usually formed as a basis function expansion. The basis functions are typically formed from one simple scalar function, which is modified in terms of scale and location. The expansion from the scalar argument to the regressor space is achieved by a radial- or a ridge-type approach. Basic techniques for estimating the parameters in the structures are criterion minimization, as well as two-step procedures, where first the relevant basis functions are determined, using data, and then a linear least-squares step to determine the coordinates of the function approximation. A particular problem is to deal with the large number of potentially necessary parameters. This is handled by making the number of ‘used’ parameters considerably less than the number of ‘offered’ parameters, by regularization, shrinking, pruning or regressor selection.     

ZS1756振动筛动态分析

应用ＳＡＰ５Ｐ软件计算矿用振动筛前４０阶固有模态，从提高寿命观点看，第１阶，第３－４阶和第６阶模态应采取抑制措施；从队噪观点看，前６阶模态应给予注意。     

数控加工螺旋凸轮的铣床改造

在普通铣床上实施数控改造后，可应用软件程序使步进电机任意变速，并可在加工过程中任意改变这行方向．从而突破了凸轮加工的传统方式，达到了简化程序、提高效率的同的．     

现代湖泊中的造迹生物暨滨湖带生物痕迹——以青海湖为例

现代湖泊中的造迹生物以底栖的寡毛类蠕虫、甲壳动物、软体动物的双壳类和腹足类、昆虫幼虫为主。通过观察,作者发现青海湖滨湖带有5类生物痕迹,它们是鸟的足迹、足辙迹、昆虫爬迹、钩虾的拖迹和甲壳虫的潜穴.生物痕迹的分布和底栖生物的分布一样受控于盐度、底层性质和岩性,共生动植物数量等环境条件。     

双能X射线骨密度仪测定技术研究

以Ｌｕｎａｒ公司ＤＰＸ－Ｌ型双能Ｘ射线骨密度仪为例，研究引起测量误差的主要因素并提出质控措施。用自检模块、腰椎体膜评定仪器的体外测量精度好于１％。对１０位志愿者重复２次测量，体内精度对腰椎，ＭＰＤ（平均百分差）为０．４６，ＣＶ（变异系数）为０．７５；对股骨颈，ＭＰＤ为１．２６、ＣＶ为０．４７；Ｗａｒｄ’ｓ三角区ＭＰＤ为２．０１、ＣＶ为１．１４；大转子ＭＰＤ为１．６６、ＣＶ为０．７２。扫描图像由２位     

玻纤增强石油发酵尼龙的热稳定性研究

利用热重动力学方法研究了玻纤增强ＰＦ尼龙（即石油发酵尼龙）的热稳定性能。玻纤和偶联剂均对ＰＦ尼龙具有热稳定化作用，且硅烷Ａ１１００对ＰＦ尼龙的热稳定化作用最为显著。     

球状碳单质分子的发现,研究现状及应用前景

综述了碳的第三种同素异形体──球状碳单质分子的发现、结构、性质及其应用前景。     

Air entrainment in fresh concrete with PFA

The results of a study into the influence of PFA on air entrainment in fresh concrete are discussed It is shown that the required dosage of AEA to produce an air content of 5.5 ± 0.5% in a PFA modified concrete mix is two-six times that required in the corresponding neat OPC concrete mix. The dosage of a vinsol based air entraining agent (AEA) required appears to be directly related to the PFA content of the mix. Similar direct relationships were obtained with a range of different PFAs. The dosage of an AEA based on the salt of a fatty acid appears to be sensitive to both PFA and OPC contents. For the type of PFA used, the variability of measured air content or the amount of air retained after continued agitation both indicated that vinsol based AEAs show the highest variability whilst fatty acid based AEAs show low variability. The between batch variability of air content was significantly improved by the addition of PFA regardless of the AEA used.     

K_2O－B_2O_3－SiO_2玻璃成分对析晶性能的影响

本文利用ＤＴＡ、ＸＲＤ、ＴＥＭ、ＳＥＭ等技术研究了三种Ｋ２Ｏ－Ｂ２Ｏ３－ＳｉＯ２玻璃的析晶性能。结果表明，Ｋ２Ｏ－Ｂ２Ｏ３－ＳｉＯ２玻璃的析晶由分相引起，分相和析晶能力受成分影响较大。随Ｂ２Ｏ３和Ｋ２Ｏ含量增多及Ｋ２Ｏ／Ｂ２Ｏ３比值的降低，析晶加强。析晶中主晶相类别尚未查清，次晶相确定为α－方石英。