Effect of Temperature and Strain Rate on the Hot Deformation Behaviour of Ferritic Stainless Steel

Metals and Materials International - The flow behaviour and microstructure characteristics of a ferritic stainless steel were investigated using plain strain compression test on a Gleeble 3500...     

NSGA-Ⅱ和NSGA-Ⅲ应用于换热网络多目标优化的对比

针对换热网络多目标优化问题，采用目前应用较广泛的两种多目标遗传算法，即NSGA-Ⅱ和NSGA-Ⅲ，对两种算法的性能进行对比研究。案例研究结果表明，NSGA-Ⅱ算法比NSGA-Ⅲ算法运行效率更高，NSGA-Ⅲ的运行时间是NSGA-Ⅱ的2倍以上；NSGA-Ⅱ算法的应用并不严格地受限于3个目标的最大目标数量，NSGA-Ⅱ在求解大于3个目标的多目标优化问题时也可能具有良好的性能，目标数量并非选择NSGA-Ⅱ和NSGA-Ⅲ算法的严格标准。对10×5换热网络案例进行4个相关目标改造优化时，从换热网络的单一性能指标来看，NSGA-Ⅱ算法更容易获得各目标的极值。从最小年度总费用的评价指标来看，两种算法的最优方案效果相近。对7×3换热网络案例进行6个目标的优化时，NSGA-Ⅲ算法得到各目标的极值较优。从最小年度总费用的评价指标来看，NSGA-Ⅲ算法获得的投资费用和年度总费用更小。对于目标函数数量不超过3个，或者3个以上具有一定相关性的多目标优化问题，推荐优先使用NSGA-Ⅱ算法实现快速寻优；而NSGA-Ⅲ算法由于其基于参考点的选择机制，运行效率较慢，更适合用于收敛困难的高维多目标优化问题。     

基于状态空间法的电动机故障诊断和识别

电动机的初期故障信号一般较弱,不易辨别,而状态空间法在小信号的处理中灵敏度很高。为达到对电动机故障的诊断和识别,试图把状态空间法应用到对电动机的故障诊断中,先通过推导,从数学理论层面分析了状态空间法对于电动机故障信号的可辨别性,再使用Matlab软件搭建状态空间的辨别模型,把实验台测试的三组数据导入到模型中进行测试。测试的结果有力地证明了此方法的可行性,并能克服快速傅里叶变换(FFT)中数据采集量较大、分辨率不高的缺点。     

新型计量斗在锰粉料制块配料中的改进应用

锰粉料制块是解决铁合金冶炼精料入炉的主要途径之一,生产过程中为解决锰粉料粘附计量斗的问题,介绍了一种新型计量斗,阐述他的结构特点和工作原理,实施改进后下料流畅,降低了劳动强度,提高了生产效率。     

交联聚乙烯电缆绝缘老化超低频介损试验及评价规程研究

本文基于通过检测电缆超低频介损值确定电缆老化程度的基本原理,结合某地实测得到的多组数据,通过国际规程IEEE 400.2—2013进行初步判断,分析处于不同状态下的电缆介损值的变化规律及其原因,并得出该规程仅适用于没有局部劣化的电缆.此外,由于我国电缆制造材料、结构和生产工艺与国外产品存在差异,采用国际规程判断电缆老化程度有时会变得不准确.为解决此类问题,本文建立更加全面的判据体系,给出最优判断阈值的确定方法,并对该地区实测得到的数据进行拟合,得到更加准确的分级判断阈值.此方法可为建立符合我国电缆实际情况的评价规程提供参考.     

Covalent triazine framework with efficient photocatalytic activity in aqueous and solid media

Covalent triazine frameworks (CTFs) have been recently employed for visible light-driven photocatalysis due to their unique optical and electronic properties. However, the usually highly hydrophobic nature of CTFs, which originates from their overall aromatic backbone, leads to limitations of CTFs for applications in aqueous media. In this study, we aim to extend the range of the application media of CTFs and design hybrid material of a CTF and mesoporous silica (SBA-15) for efficient photocatalysis in aqueous medium. A thiophene-containing CTF was directly synthesized in mesopores of SBA-15. Due to the high surface area and the added hydrophilic properties by silica, the hybrid material demonstrated excellent adsorption of organic molecules in water. This leads not only to high photocatalytic performance of the hybrid material for the degradation of organic dyes in water, but also for efficient photocatalysis in solvent-free and solid state. Furthermore, the reusability, stability and easy recovery of the hybrid material offers promising metal-free heterogeneous photocatalyst for broader applications in different reaction media.     

铁尾矿砂力学特性及再生利用研究进展

铁尾矿砂的储量日趋增加,要减小铁尾矿坝的风险、提高铁尾矿砂的利用率,须明确铁尾矿砂的力学特性.通过对铁尾矿砂静力特性及动力特性的分析发现,尾矿砂的粒径分布是决定尾矿坝稳定及铁尾矿砂再生利用的主要因素之一,细粒含量、干密度、含水率等因素对铁尾矿砂动力特性有一定影响.再生利用铁尾矿砂的主要方式是将铁尾矿砂混凝土、改性铁尾矿砂用作工程材料,水泥、石灰、纤维是改性铁尾矿砂的主要材料.最后指出需进一步研究新型材料取代传统改性材料改善铁尾矿砂的力学特性,从而提高资源利用率.     

消渴健脾胶囊对2型糖尿病小鼠降血糖作用研究

为研究消渴健脾胶囊对2型糖尿病小鼠的降血糖作用,取75只昆明种雄性小鼠,除正常对照组10只外,其余小鼠腹腔注射链脲佐菌素建立2型糖尿病小鼠模型,将造模成功的糖尿病小鼠随机分为模型组,阳性组(盐酸二甲双胍150.00 mg·kg~(-1)),消渴健脾胶囊低(238.88 mg·kg~(-1))、中(477.75 mg·kg~(-1))、高(955.50 mg·kg~(-1))剂量组,每组10只,正常对照组和模型组给予0.1 mL·(10 g体重)~(-1)蒸馏水,连续给药28 d后,测定小鼠体重、空腹血糖(FBG)值、糖耐量(GT)、糖化血清蛋白(GSP)水平及血清胰岛素(INS)水平。结果表明,与模型组比较,给药28 d后,消渴健脾胶囊各剂量组小鼠体重显著增加,差异具有统计学意义(P0.05);消渴健脾胶囊各剂量组小鼠FBG值显著降低,差异具有统计学意义(P0.05或P0.01);消渴健脾胶囊中、高剂量组小鼠GT显著降低,差异具有统计学意义(P0.05或P0.01);消渴健脾胶囊各剂量组小鼠GSP水平显著降低,差异具有统计学意义(P0.05或P0.01);消渴健脾胶囊高剂量组小鼠INS水平显著升高,差异具有统计学意义(P0.05)。消渴健脾胶囊对链脲佐菌素所致2型糖尿病小鼠有一定的治疗作用。     

New anti-ablation candidate for carbon/carbon composites: Preparation,composition and ablation behavior of Y2Hf2O7 coating under an oxyacetylene torch

Y₂Hf₂O₇ possesses low thermal conductivity and high melting point, which make it promising for a new anti-ablation material. For evaluating the thermal stability and the potential applications of Y₂Hf₂O₇ on anti-ablation protection of C/C composites, Y₂Hf₂O₇ ceramic powder was synthesized by solution combustion method and Y₂Hf₂O₇ coating was prepared on the surface of SiC coated C/C composites using SAPS. Results shown that the coating exhibits good ablation resistance under the heat flux of 2.4?MW/m² with the linear and mass ablation rates are 0.16?μm?s^?1 and ?0.028?mg?s^?1, respectively, after ablation for 40?s. With the prolonging of the ablation time, the increasing thermal stress causes the increase of cracks. Moreover, the chemical erosion from SiO₂ and the physical volatilization of low temperature molten products aggravate failure of the Y₂Hf₂O₇ coating.