During the last years, we have witnessed the boom of the digital market due to the proliferation of emergent audiovisual services and the increasing number of broadband networks. In this scenario, users insistently demand innovative services for exchanging and sharing their own audiovisual contents. In order to meet these needs, in this paper we propose a system that broadcasts user-generated audiovisual contents for handheld devices in a mobile network based on the DVB-H broadcasting standard. Besides, our system offers diverse added-value services to these new active users, such as: (i) multi modal access (via Web or by client applications running locally in handheld devices) to digital contents, (ii) exploitation of return channels to transmit interactive contents that enhance the user’s experience, and (iii) annotation, sharing and personalized distribution of audiovisual contents. To achieve these goals, our system adopts well-known technologies for broadcasting and semantic annotation of audiovisual contents, as well as emergent technology from the so-called Web 2.0. A prototype of our system has been experimentally evaluated with a group of students from the University of Vigo, who were enthusiastic about the personalization capabilities offered by our TV system for a mobile setting. 相似文献
This paper presents a comparative analysis between results from applications of the p-q and the p-q-r theories in shunt active power filters for three-phase four-wire systems, discussing aspects related to the influence of the system voltage in the control methods that calculate the compensating currents. It is shown that in some cases, a preprocessing of the system voltage is required if the goal is to achieve sinusoidal compensated currents. On the other hand, when the goal is to compensate zero-sequence current, the need of energy storage elements in the active filter is discussed. In this case, if zero-sequence components are present simultaneously in the system voltage and load current, they produce zero-sequence power flow, and the control methods based on both theories must contain additional calculations to allow the elimination of energy storage elements in the active filter. A control strategy based on the p-q theory is proposed to eliminate the neutral current without the need of energy storage elements, with the advantage of avoiding the extra transformation from alphabeta0 to pqr coordinates that is needed in the p-q-r theory. Simulation results are presented for the purpose of comparing the performance of both control methods. 相似文献
This paper introduces the application of independent component analysis mixture modelling (ICAMM) in non-destructive testing (NDT). The application consists of discriminating patterns for material quality control from homogeneous and defective materials inspected by impact-echo testing. This problem is modelled as a mixture of independent component analysis (ICA) models, representing a class of defective or homogeneous material by an ICA model whose parameters are learned from the impact-echo signal spectrum. These parameters define a kind of particular signature for the different defects. The proposed procedure is intended to exploit to the maximum the information obtained with the cost efficiency of only a single impact. To illustrate this capability, four levels of classification detail (material condition, kind of defect, defect orientation, and defect dimension) are defined, with the lowest level of detail having up to 12 classes. The results from several 3D finite element models and lab specimens of an aluminium alloy that contain defects of different shapes and sizes in different locations are included. The performance of the classification by ICA mixtures is compared with linear discriminant analysis (LDA) and with multi-layer perceptron (MLP) classification. We demonstrate that the mass spectra from impact-echo testing fit ICAMM, and we also show the feasibility of ICAMM to contribute in NDT applications. 相似文献
Radiation damage induced by neutron irradiation was studied in undoped MgO crystals and in MgO doped with either iron, hydrogen or lithium impurities. The oxygen-vacancy concentration produced by irradiation increases with neutron fluence. The net production rates resulting from irradiations with 14.8 MeV neutrons are about twice those produced by fission neutrons.
In nominally pure crystals, the oxygen-vacancy concentration incurred by the fission-neutron irradiation is higher in crystals with a larger number of inherent impurities (such as iron) due to trapping of interstitials by impurities. Suppression of these defects is observed in MgO:H crystals and attributed to migration of oxygen vacancies to microcavities filled with H2 gas. In MgO:Li crystals irradiated with neutron fluences below 1018 n/cm2, most of the oxygen vacancies are camouflaged as hydride ions. Nanoindentation experiments show that hardness increases with neutron fluence and is independent of the presence of lithium in the crystal. Comparison between a neutron-irradiated and a thermochemically reduced crystal containing similar concentrations of oxygen vacancies shows that 70% of the neutron-irradiation hardening is produced by interstitials, 30% by oxygen vacancies and a negligible amount by higher-order point defects. 相似文献
This paper presents an inexpensive and simple system to measure the way of use of the backrest. The system can be also used in field studies. It is based on a set of electrodes which, attached to the subject's back and the backrest, allows the contact area to be measured. A laboratory test was performed to validate the system. In the test the spontaneous use of the backrest in standard office chairs and tasks was studied. Four different types of backrest use have been detected, and it has been shown that they determine the lumbar curvature and pelvic inclination angles, as well as postural mobility. The comfort levels observed in the four types of backrest use were also different. Consequently, the system can be used as an indicator of back posture and comfort. 相似文献
Linear alkylbenzenesulfonates (LAS) (C(10)-C(13)) and their degradation products, sulfophenyl carboxylate compounds (SPCs) (C(2)-C(6), C(8), C(11)), have been extracted from soil samples with methanol, isolated, concentrated by solid-phase extraction, and determined by liquid chromatography/negative ion electrospray quadrupole ion-trap tandem mass spectrometry (MS(n)). The ion fragmentation processes and pathways were studied in detail by MS, MS(2), and MS(3). Upon collision-induced dissociation, the deprotonated molecules of LASs render the ethylene-substituted benzenesulfonate ion (m/z 183), the fragmentation of which gave the intense signal at m/z 119, corresponding to the ethylene-substituted phenoxide ion formed by the loss of sulfur dioxide. The fragmentation pattern of SPCs shows that, for the analytes of large carbon atom chains (>5C), the neutral loss of water is favored whereas for those of short carbon atoms chain, the loss of carbon dioxide is more frequent. Multiple reaction monitoring using isolation only for MS and using isolation and fragmentation for MS(2) and MS(3) were used to identify and quantify each compound. The three MS modes have been validated in terms of sensitivity, selectivity, and precision, showing that each MS stage used reduces sensitivity 10 times. Recoveries from soil were higher than 65% at LOQ level for all the analytes tested, except for C(2)-C(4) SPCs by any MS mode, with relative standard deviation lower than 19%. The utility of the method is demonstrated by successfully quantifying real samples treated with these products. Quantification limits for the methodology developed in this work ranged from 0.5 to 50 microg kg(-1) by MS, from 2 to 400 microg kg(-1) by MS(2), and from 20 to 4000 microg kg(-1) by MS(3). Concentration levels of LASs and SPCs-ranging from 0.1 to 15 mg kg(-1)-were found in soil samples amended with sludges, thus indicating their input and persistence in the soil compartment. 相似文献
A method to determine five postharvest fungicides (dichloran, flutriafol, o-phenylphenol, prochloraz, tolclofos methyl) in fruits (cherries, lemons, oranges, peaches) has been developed using solid-phase microextraction (SPME) coupled to liquid chromatography (LC) with photodiode array (DAD), mass spectrometry (MS), or tandem mass spectrometry (MS/MS) with ion trap detection. Extraction involved sample homogenization with an acetone/water solution (5:1), filtration, and acetone evaporation prior to fiber extraction. The pesticides were isolated with a fused-silica fiber coated with 50-microm Carbowax/template resin. The effects of pH, ion strength, sample volume, and extraction time were investigated, and their impact on the SPME-LC/MS was studied. Dynamic and static modes of desorption were compared and the variables affecting desorption processes in SPME-LC optimized. Static desorption provided the best recoveries and peak shapes. Recoveries at the limit of quantification (LOQ) levels were between 10% for prochloraz and 60% for o-phenylphenol, with relative standard deviations from 13.6% for prochloraz to 3.1% for o-phenylphenol. The versatility of the method was also exhibited by its excellent linearity in the concentration intervals between 0.0005 and 5 mg kg(-1) for dichloran and 0.01-10 mg kg(-1) for tolclofos methyl and prochloraz. LOQs ranged from 0.25 to 1 microg g(-1) using DAD, from 0.002 to 0.01 microg g(-1) using LC/MS, and from 0.0005 to 0.01 to microg g(-1) using LC/MS/MS. LOQs obtained in the present study using LC/MS and LC/MS/MS are lower than maximum residue limits established for all the fungicides in any matrix studied. The method enables to determine polar pesticides at low-microgram per gram levels in fruits. 相似文献
A new method of outlier detection and data cleaning for both normal and non-normal multivariate data sets is proposed. It is based on an iterated local fit without a priori metric assumptions. We propose a new approach supported by finite mixture clustering which provides good results with large data sets. A multi-step structure, consisting of three phases, is developed. The importance of outlier detection in industrial modeling for open-loop control prediction is also described. The described algorithm gives good results both in simulations runs with artificial data sets and with experimental data sets recorded in a rubber factory. Finally, some discussion about this methodology is exposed. 相似文献