The Atmospheric Scanning Electron Microscope with open sample space observes dynamic phenomena in liquid or gas

Although conventional electron microscopy (EM) requires samples to be in vacuum, most chemical and physical reactions occur in liquid or gas. The Atmospheric Scanning Electron Microscope (ASEM) can observe dynamic phenomena in liquid or gas under atmospheric pressure in real time. An electron-permeable window made of pressure-resistant 100 nm-thick silicon nitride (SiN) film, set into the bottom of the open ASEM sample dish, allows an electron beam to be projected from underneath the sample. A detector positioned below captures backscattered electrons. Using the ASEM, we observed the radiation-induced self-organization process of particles, as well as phenomena accompanying volume change, including evaporation-induced crystallization. Using the electrochemical ASEM dish, we observed tree-like electrochemical depositions on the cathode. In silver nitrate solution, we observed silver depositions near the cathode forming incidental internal voids. The heated ASEM dish allowed observation of patterns of contrast in melting and solidifying solder. Finally, to demonstrate its applicability for monitoring and control of industrial processes, silver paste and solder paste were examined at high throughput. High resolution, imaging speed, flexibility, adaptability, and ease of use facilitate the observation of previously difficult-to-image phenomena, and make the ASEM applicable to various fields.     

Fe-Ni-Si基奥氏体时效合金的马氏体相变和形状记忆效应

It is well known that the morphologies of the α martensite formed from the γ phase in ferrous alloys are classified into five types of lath, butterfly, (225)A type plate,lenticular and thin-plate. Among those α martensites, onlythe thinplate martensite, which is characterized by containing a high density of transformation twins, has a potential of exhibiting a perfect shape memory (SM) effect.Recently the present authors found in Fe-Ni-Si alloys that the thin-plate martensite is formed by the introduction of fine and coherent γ-(Ni,Fe)3Si particles with a L12 ordered structure in the austenite matrix due to ausaging. In the present study, the SM properties of the ausaged Fe-Ni-Si alloys with the thin-plate martensite are investigated by a conventional bending-test. The effects of the addition of Co to the Fe-Ni-Si alloys on the martensitic transformation and the SM properties are also investigated. It is shown that while the ausaged Fe-Ni-Si ternary alloys exhibit an imperfect SM effect due to reverse transformation from stress-induced thin-plate martensite to austenite, the SM properties are improved by the addition of Co. An almost perfect SM effect is confirmed in the Fe-Ni-Si-Co alloys by heating to 1 100 ℃ after deformation at -196 ℃.     

Development of a homogeneous competitive immunoassay for phosphorylated protein antigen based on the enhanced fluorescence resonance energy transfer technology

We describe a homogeneous competitive immunoassay for a phosphorylated protein antigen. The assay takes advantage of the enhanced fluorescence resonance energy transfer (FRET) technology, which has a unique characteristic that the FRET signal is increased by the specific interaction of two fluorolabeled leucine zippers. We chose extracellular signal-regulated kinase (ERK) as a model antigen and constructed two molecular probes in which either anti-phosphorylation site antibody or the antigen peptide was chemically conjugated to the enhanced FRET probes. While these molecular probes indicated sufficient FRET signal without antigen, they displayed a significant change in the fluorescent spectrum by mixing with phosphorylated antigens. With this competitive enhanced FRET immunoassay, a phosphorylated ERK concentration within the range from 15 nM to 250 nM could be determined. Because the assay is very simple, it would be applied to not only in vitro assay but also in vivo detection of protein phosphorylation.     

Hilbert-Huang变换在结构健康诊断中的应用研究

通过一个足尺的2层木结构房屋振动台试验,对Hilbert-Huang变换(HHT)在结构损伤诊断中的应用进行了研究与分析。在简要介绍了Hilbert-Huang变换的基本原理与方法后,根据在振动台试验中获取的结构反应数据,利用Hilbert-Huang变换对结构的动力特性及损伤状况进行了诊断。分析结果表明,Hilbert-Huang变换能有效地将隐含在实测结构反应信号中的结构动力特性与损伤信息进行提取,从而能对结构的健康状况进行诊断。     

Simulation of a chemical reaction, 2LiH→Li2+H2, driven by doubly excitation

A direct computer simulation of reaction dynamics at the electronic excited states is not easy to perform, because nonadiabatic equations must be solved as a function of time. Here we present a simple simulation to integrate directly the time-dependent Schrödinger equation within the framework of the time-dependent density functional theory (for electrons) coupled with the Newtonian equation of motion (for nuclei). We find that a chemical reaction, 2LiH→Li₂+H₂, takes place by the doubly excitation. Along the reaction, a level crossing occurs automatically between the highest occupied and lowest unoccupied levels. The simulation demonstrates a mechanism for relaxation for the reactions driven by doubly excitation: electronic excited state changes smoothly into the electronic ground state leaving a kinetic energy of the atoms.     

Modeling of Nonlinear Magnetizing Characteristics of Pole Transformer for Analyzing Islanding Prevention of Photovoltaic System

With increasing penetration of distributed generators such as photovoltaic (PV) systems in distribution systems, it is very important to quickly detect islanding caused by power system faults in order to assure electrical safety. We have developed a nonlinear magnetizing characteristics model of pole transformers for use in analyzing islanding prevention in PV systems. Basic experiments on the islanding detection were performed for verification of the proposed model. Analytical results obtained by the proposed model agreed well with experimental results.     

Possibility of Japanese Cedar Pollen Causing False Positives in the Deep Mycosis Test

Because Japanese cedar pollen (JCP) contains beta-1,3-d-glucan (BG), there is concern that its lingering presence in the atmosphere, especially during its scattering period, may cause false positives in the factor-G-based Limulus amebocyte lysate (LAL) assay used to test for deep mycosis (i.e., G-test). Hence, we examined whether the LAL assay would react positively with substances contained in JCP by using the G-test to measure JCP particles and extracts. BG was purified from the JCP extract on a BG-specific affinity column, and the percentage extractability was measured using three different BG-specific quantitative methods. The G-test detected 0.4 pg BG in a single JCP particle and 10 fg from a single particle in the extract. The percentage extractability of JCP-derived BG was not significantly different among the three quantitative methods. As the JCP particles should technically have been removed during serum separation, they should be less likely to be a direct false-positive factor. However, given that the LAL-assay-positive substances in the JCP extract were not distinguishable by the three BG-specific quantitative methods, we conclude that they may cause the background to rise. Therefore, in Japan false positives arising from JCP contamination should be considered when testing patients for deep mycosis.     

Characteristic scales of two‐dimensional turbulence in polymer solutions

An experimental study has been performed to investigate the relationship between the extensional viscosity of polymers and the turbulent drag reduction. Self‐standing flowing soap film was used to generate two‐dimensional (2‐D) turbulent flow to eliminate shear stress. Two types of polymers having different flexibilities were added to the 2‐D turbulence. The effects of these polymers were visualized by the interference pattern of flowing soap films. The vortex deformation by adding polymers was analyzed by Fourier transformation and wavelet transformation. The scaling exponents of the power spectrum of interference patterns indicate that the mechanism of turbulence laminarization due to the extensional viscosity is anisotropic. A wavelet analysis reveals the high and low fluctuations of the polymer‐added flow. Results from wavelet analysis indicate disappearing of original vortices, and appearing of new structures in low frequency in 2‐D flow. © 2014 American Institute of Chemical Engineers AIChE J, 60: 1854–1862, 2014     

High performance films of cellulose butyral derivative having a necklace-like annular structure in the side chains

We fabricated high performance films using cellulose butyral (CB) synthesized from native cellulose. Two-step reactions were adopted to produce the derivative CB, including etherification of cellulose with glycidol in NaOH/urea aqueous solution to yield O-(2,3-dihydroxypropyl) cellulose (DHPC), and butyralization of DHPC. Both DHPC and CB products were easily processed into a thin film by hot-press molding. The butyral modifier significantly improved the tenacity of highly ductile DHPC, by virtue of the possible chain-entangling action of the ring structures in the stretching process. Thereby the film toughness was markedly enhanced. The CB films exhibited excellent optical transparency and a good adhesive property to glass plates. Thus the films may be comparable to commercial poly(vinyl butyral) (PVB) films in optical and mechanical performances and therefore possess a potential applicability as interlayer for laminated glasses.     

Dissolution properties of different compositions of biphasic calcium phosphate bimodal porous ceramics following immersion in simulated body fluid solution

Biphasic calcium phosphate (BCP) bimodal porous ceramics were prepared from a mixture of fine powders of hydroxyapatite (HAp) and beta-tricalcium phosphate (β-TCP) with varying HAp/β-TCP ratios. Two types of HAp powders and one type of β-TCP powder were used to produce porous BCP bioceramics with HAp/β-TCP weight ratios of 20/80, 40/60, and 80/20. Dissolution tests were performed to compare the dissolution properties of BCP-based bioceramics with different structural properties. Porous ceramic samples of approximately 0.5 g were individually soaked in 30 ml of simulated body fluid (SBF) solution at 36.5 °C for 1, 3, 7 and 10 days, respectively. The calcium content of the SBF solution was analyzed by ICP. The porous bodies were filtered, dried, and characterized using SEM, XRD, and FT-IR. The results indicate that the sample structural properties seem to have a greater effect than the storage environment on the dissolution properties.