Behavior of FRP-confined concrete after high temperature exposure

This paper presents the results of an experimental program to investigate the effect of high temperature on the performance of concrete externally confined with FRP sheets. For this purpose, a two-phase experimental program was conducted. In the first phase, 42 standard 100 × 200 mm concrete cylinders were prepared. Out of these specimens, 14 cylinders were left unwrapped; 14 specimens were wrapped with one layer of CFRP sheet; and the remaining 14 specimens were wrapped with one layer of GFRP sheet. Some of the unconfined and FRP-confined specimens were exposed to room temperature; whereas, other cylinders were exposed to heating regime of 100 °C and 200 °C for a period of 1, 2 or 3 h. After high temperature exposure, specimens were tested under uniaxial compression till failure. The test results demonstrated that at a temperature of 100 °C (a little more than the glass transition temperature (T_g) of the epoxy resin), both CFRP- and GFRP-wrapped specimens experienced small loss in strength resulting from melting of epoxy. This loss of strength was more pronounced when the temperature reached 200 °C. In the second phase of the experimental program, three 100 × 100 × 650 mm concrete prisms were prepared and then overlaid by one layer of CFRP and GFRP laminates for conducting pull-off strength tests as per ASTM D4541 – 09. The objective of this testing was to evaluate the degradation in bond strength between FRP and concrete substrate when exposed to elevated temperature environments. One prism was exposed to room temperature whereas the other two specimens were exposed to heating regime of 100 °C and 200 °C for a period of 3 h. It was concluded that a significant degradation in the bond strength occurred at a temperature of 200 °C especially for CFRP-overlaid specimens.     

Characterization of stabilized porous magnetite core–shell nanogel composites based on crosslinked acrylamide/sodium acrylate copolymers

Stabilized and dispersed superparamagnetic porous nanogels based on sodium acrylate (AA‐Na) and acrylamide (AM) in a surfactant‐free aqueous system were synthesized via solution polymerization at room temperature. The formation of magnetite nanoparticles was confirmed and their properties characterized using Fourier transform infrared spectroscopy. Extensive characterization of the magnetic polymer particles using transmission electron microscopy (TEM), dynamic light scattering and zeta potential measurements revealed that Fe₃O₄ nanoparticles were incorporated into the shells of poly(AM/AA‐Na). The average particle size was 5–8 nm as determined from TEM. AM/AA‐Na nanoparticles with a diameter of about 11 nm were effectively assembled onto the negatively charged surface of the as‐synthesized Fe₃O₄ nanoparticles via electrostatic interaction. Crosslinked magnetite nanocomposites were prepared by in situ development of surface‐modified magnetite nanoparticles in an AM/AA‐Na hydrogel. Scanning electron microscopy was used to study the surface morphology of the prepared composites. The morphology, phase composition and crystallinity of the prepared nanocomposites were characterized. Atomic force microscopy and argon adsorption–desorption measurements of Fe₃O₄.AM/AA indicated that the architecture of the polymer network can be a hollow porous sphere or a solid phase, depending on the AA‐Na content. © 2013 Society of Chemical Industry     

Large‐scale fading behavior for a cellular network with uniform spatial distribution

Large‐scale fading (LSF) between interacting nodes is a fundamental element in radio communications, responsible for weakening the propagation, and thus worsening the service quality. Given the importance of channel‐losses in general, and the inevitability of random spatial geometry in real‐life wireless networks, it was then natural to merge these two paradigms together in order to obtain an improved stochastical model for the LSF indicator. Therefore, in exact closed‐form notation, we generically derived the LSF distribution between a prepositioned reference base‐station and an arbitrary node for a multi‐cellular random network model. In fact, we provided an explicit and definitive formulation that considered at once: the lattice profile, the users' random geometry, the effect of the far‐field phenomenon, the path‐loss behavior, and the stochastic impact of channel scatters. The veracity and accuracy of the theoretical analysis were also confirmed through Monte Carlo simulations.     

Low end‐to‐end delay fuzzy networking protocol for mobile wireless sensing

Because of the practical limitations of the energy and processing capabilities, the deployment of many Wireless Sensor Networks (WSN) is facing two main challenges of increasing network lifetime and reducing End to End Delay (EED) which become critical when the nodes are mobile and use non‐rechargeable energy sources. One way to help to extend network lifetime is using fuzzy logic in a form of artificial intelligence. To this end we propose a new routing protocol for using mobile WSNs, which holds the nodes in an equal level of energy and decreases energy dissipation of the network. An optimum path is selected based on the cost of each node to increase network lifetime. In order to lessen EED, we also attempt to design a novel zoning‐scheme for the network area. In this scheme, zonation is dynamic and works based on the Data Link (DL) position. The simulation result shows a significant improvement in lifetime and EED by proposed protocol compared with existing protocols. Copyright © 2016 John Wiley & Sons, Ltd.     

Linear Form Finding Approach for Regular and Irregular Single Layer Prism Tensegrity

In an irregular prism tensegrity, the number of force equilibrium equations is less than the number of unknown parameters of nodal coordinates and member force ratios. As a result, the form-finding process normally becomes nonlinear with additional conditions or needs to be carried out with the use of iterative procedures. For cases of irregular prism tensegrity which involves large number of members, it was found that previously proposed methods of form-finding are not practical. Moreover, there is a need for a form-finding approach which is able to cater to different requirements on final configuration. In this paper, the length relation condition is introduced to be used in combination with the force equilibrium equation. With the combined use of length relation and equilibrium conditions, a linear form-finding approach for irregular prism tensegrity was successfully formulated and developed. An easy-to-use interactive form-finding tool has been developed which can be used for form-finding of irregular prism tensegrities with large number of elements as well as under diverse specific requirements on their configurations.     

Supertough (Polyamide 6)/(acrylonitrile butadiene rubber) nano alloy through in situ polymerization of caprolactam in the presence of acrylonitrile butadiene rubber nanophase

In this work, polymerization of caprolactam (CL) was carried out in the presence of acrylonitrile butadiene rubber (NBR) during the reactive melt‐mixing process. During shear mixing, NBR particles swelled and dissolved in the molten CL, which led to separation and distribution of rubber particles to nanoscale in the dissolution stage. Then, in an internal mixer, supertough Polyamide 6 was prepared via melt polymerization of CL/NBR mixture, sodium caprolactam as a catalyst, and hexamethylene diisocyanate as an activator. The effects of various concentrations of catalyst and activator on the initiation time of the reaction were determined. Physical and mechanical properties of different formulations prepared via reactive melt blending were determined by tensile and impact measurements, differential scanning calorimetry, Fourier‐transform infrared spectroscopy, X‐ray scattering techniques, transmission electron microscopy, and dynamic mechanical thermal analysis. Experimental results showed that a recipe with 3% nitrile rubber in a CL/NBR mixture enhances the physical and mechanical properties the best, compared with other formulations. This condition led to the formation of NBR nanospheres during melt polymerization of Polyamide 6 as well. J. VINYL ADDIT. TECHNOL., 21:116–121, 2015. © 2014 Society of Plastics Engineers     

Comparison of bearing capacity of a strip footing on sand with geocell and with planar forms of geotextile reinforcement

Comprehensive results from laboratory model tests on strip footings supported on the geocell and planar reinforced sand beds with the same characteristics of geotextile are presented. The various parameters studied in this testing program include the reinforcement width, the number of planar layers of geotextile and height of the geocell below the footing base. Contrary to other researches, the performance of the geocell and planar reinforcement is investigated at the range of low to medium settlement level, similar to those of interest in practice. The results show that the efficiency of reinforcement was decreased by increasing the number of the planar reinforcement layers, the height of the geocell reinforcement and the reinforcement width. For the same mass of geotextile material used in the tests at the settlement level of 4%, the maximum improvement in bearing capacity (IF) and percentage reduction in footing settlement (PRS) were obtained as 2.73 and 63% with the provision of geocell, respectively, while these values compare with 1.88 and 47% for the equivalent planar reinforcement. On the whole, the results indicate that, for the same quantity of geotextile material, the geocell reinforcement system behaves much stiffer and carries greater loading and settles less than does the equivalent planar reinforcement system. Therefore, a specified improvement in bearing pressure and footing settlement can be achieved using a lesser quantity of geocell material compared to planar geotextile.     

Nodular structure of isotactic polypropylene crystallizes from the melt

This article highlights the melt crystallization behavior of different grades of isotactic polypropylene (iPP) using a hot‐stage polarizing optical microscopy. iPP samples were heated up at a heating rate of 10°C/min passing the melting temperature and then kept for 3 min at a temperature range of 175–200°C before they cooled rapidly at 40°C/min to crystallize isothermally at a range of 130–145°C. It has been found that the temperature at which the samples were kept has a strong effect on the crystallization mode; for samples heated up and kept at temperatures below 190°C, the crystallization started with thin and long rods or nodules, which grew in the circumferential direction only while their lengths remain unchanged as the time passed. The shape of the nodules can be straight, circular, branched, or entangled, and they can grow parallel to each other or they can be crossed or in a random way. This phenomenon disappeared completely for samples melted and kept at temperatures above 195°C. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Operations research/management science in the Arab world: historical development

This study aims to review the related literature on operations research (OR)/management science (MS) in the Arab world published during the last three decades. Owing to the nature of this study, an extensive survey of the related literature was conducted and inferences were drawn. The inferences drawn from the literature survey on OR/MS in the Arab world were first, there is a paucity of published real‐world applications of OR/MS. Second, there is a lack of published survey‐type studies in most Arab countries, except in Jordan, Lebanon, Palestine, Syria, and the United Arab Emirates. Third, the majority of published works on OR/MS were of a conceptual nature. A few papers concerned with OR/MS in the Arab world were published during the 1980s, with a special emphasis on conceptual issues rather than on applied or survey‐type studies. The 1990s witnessed an increased number of publications on both survey‐type and conceptual studies. Since 2000, the number of publications has increased substantially, mainly through conceptual studies. This study has a number of implications for both practitioners and researchers. Practitioners will be made aware of the applications of OR/MS in the Arab world and the type of problems that have been addressed. This, in turn, might motivate the decision makers and the managers to adopt OR/MS approaches in solving their organizations' problems. As a result, this might increase the usage of OR/MS in this part of the world. Researchers will be able to identify the OR/MS research areas that need more attention in the Arab world. The study mainly covers the studies that are written in English and indexed in non‐Arabic databases. Although the Arabic works were not surveyed exhaustively, the author reviewed and included some available OR/MS works written in Arabic. This study is considered as the first work of its type in surveying the scholarly publications pertaining to OR/MS in the Arab world since the 1980s.