A module‐integrated isolated solar micro‐inverter without electrolytic capacitors

This paper presents a module‐integrated isolated solar micro‐inverter. The studied grid‐tied micro‐inverters can individually extract the maximum solar power from each photovoltaic (PV) panel and transfer to the AC utility system. A harmonic suppression technique is used to reduce the DC‐bus capacitance. Electrolytic capacitors are not needed in the studied solar micro‐inverter. High conversion efficiency, high maximum power point tracking accuracy and long lifespan can be achieved. The operation principles and design considerations of the studied PV inverter are analyzed and discussed. A laboratory prototype is implemented and tested to verify its feasibility. Copyright © 2012 John Wiley & Sons, Ltd.     

Clean up of Petroleum-Hydrocarbon Contaminated Soils Using Enhanced Bioremediation System: Laboratory Feasibility Study

The objective of this study was to assess the potential of applying enhanced bioremediation on the treatment of petroleum-hydrocarbon contaminated soils. Microcosm experiments were conducted to determine the optimal biodegradation conditions. The control factors included oxygen content, nutrient addition, addition of commercially available mixed microbial inocula, addition of wood chip and rice husk mixtures (volume ratio = 1:1) as bulking agents, and addition of organic amendments (chicken manures). Results indicate that the supplement of microbial inocula or chicken manures could significantly increase the microbial populations in soils, and thus enhance the efficiency of total petroleum hydrocarbon (TPH) removal (initial TPH = 5,500?mg/kg). The highest first-order TPH decay rate and removal ratio were approximately 0.015?day?1 and 85%, respectively, observed in microcosms containing microbial inocula (mass ratio of soil to inocula = 50:1), nutrient, and bulking agent (volume ratio of soil to bulking agent = 10 to 1) during 155 days of incubation. Results indicate that the first-order TPH decay rates of 0.015 and 0.0142?day?1 can be obtained with the addition of microbial inocula and chicken manures, respectively, compared with the decay rate of 0.0069?day?1 under intrinsic conditions. Thus, chicken manures have the potential to be used as substitutes of commercial microbial inocula. The decay rate and removal ratio can be further enhanced to 0.0196?day?1 and 87%, respectively, with frequent soil shaking and air replacement. Results will be useful in designing an ex situ soil bioremediation systems (e.g., biopile and land farming) for practical application.     

The high‐speed measurement of a partial area imaging system applied to photoresist development processing

Abstract

Among the parameters that affect photolithography, the most important are exposure and development time which affect the coating photoresist characteristics. This study further researches the relationship between the exposure and development time using a high speed image inspection system, and the relationship between the development time and photoresist depth using a Scanning Probe Microscope (SPM). A partial scan CCD camera and high speed frame capture card were used to obtain the photoresist development processing parameters. The experimental results verified that this imaging system provides an economical and effective method for producing a micro‐photo‐etched product. It is expected that these experiments can also offer some good references useful in the micro electro mechanical industrial field.     

Efficient development of cycle time response surfaces using progressive simulation metamodeling

In semiconductor manufacturing, hot lots are to provide marketing and engineering with extra flexibility regarding delivery lead times, and in turn enhance its competitive advantages against other companies. On the other hand, hot lots are among major sources of disruption of the smoothness of the manufacturing flow. They can lead to a significant increase of cycle time of normal lots, and in turn result in delayed delivery times and serious service deteriorations. Due to the complex nature of semiconductor manufacturing, evaluating the impact of hot lots on the cycle time of normal lots presents major challenges. In this paper, we propose a methodology, called progressive simulation metamodelling (PSM), that allows for an efficient development of the response surface between the cycle time of normal lots and the percentage of hot lots in semiconductor manufacturing. The response surface generated by the proposed PSM is like an easy-to-use analytical model, but with the fidelity of simulation that takes into account all important manufacturing details. The specially-designed mechanisms, including identifying the critical region and sequentially adding design points in the critical region, further grants PSM computational advantages compared to the traditional response surface method. An empirical study conducted in collaboration with a semiconductor company validates the viability of PSM in real settings.     

Temperature and voltage sensings by mode‐mode interference in polarization‐maintaining optical fibers

Abstract

Two optic fiber sensing systems for temperature and voltage have been developed which utilize the mode‐mode interference of the two orthogonally polarized modes, HE^x _II and HE^y _II, in two commencal polarization‐maintaining fibers (bow‐tie and elliptical core fibers). A package of controlled programs in a Macintosh computer, which can record and process all related data automatically, is established for temperature sensing. The signal drifting problem in voltage sensings has been investigated, and the elimination of signal drifting is obtained by the phase tracking with direct current technology The agreement between the sensing results for temperature and dynamic voltage and those predicted by experimental principles is satisfactory, which confirms the validity of the developed sensing systems.     

A study on the formation of a measurement scale for the environmental quality of Taiwan’s long-term care institutions by the Delphi method

This study used a two-round modified Delphi technique with a questionnaire survey in order to reach a consensus for the questionnaire; the survey was conducted from September to December 2009. The six indicators for the environmental quality of long-term care institutions in Taiwan are (1) indoor environmental quality, (2) safety equipment for the prevention and management of disasters occurring in residents?? daily lives, (3) provision for assistive devices for residents?? daily use, (4) provision for privacy and individualized space, (5) provision for comfortable and decorated indoor environments, and (6) provision for social interaction space. The scale included 34 items with an acceptable number of panel members and acceptable construct validity. Panel members all highly approved of Indicators 1, 2, and 6. Although they approved of Indicator 3, they suggested that caregivers at institutions should replace the functions of living assistive devices. They approved of Indicator 5; however, they questioned the method for providing comfortable and decorated environments. They approved of Indicator 4; however, they suggested that private space need not be provided in the living room of the institution. In terms of long-term care institution environments in Taiwan, Indicators 1, 2, and 6 were important for protecting residents?? physical and psychological well-being and improving their social interactions. Indicator 3, although important, could be directly replaced by caregivers. Indicator 5 required more implementation methods, while Indicator 4, the living room of the institution, was considered unnecessary.