Melt viscosity and flow birefringence of polycarbonate

Melt viscosity and flow birefringence of bisphenol A-type polycarbonate were measured and analyzed by the application of rubber-like photoelastic theory. The melt viscosity in the Newtonian flow region increased with the molecular weight to the power of 3.4. In polycarbonate, the shear stress of the Newtonian flow region was to 10⁶ dyn/cm², whereas in PMMA it was at most 3 = 10⁵ dyn/cm². The flow birefringence δn has a linear relation with shear stress S, that is δn = 5.7 × 10^?10 S. The principal polarization difference of flow unit α₁ – α₂ was 1.62 × 10^?23 cm³, which was obtained by the application of the rubber-like elastic theory. In PMMA, it was 3.9 = 10^?25 cm³; about 1/40 of that was polycarbonate. The anisotropy of polarizability of the flow unit of polycarbonate was also about 40 times larger than that of PMMA. So the anisotropy reflected the large flow birefringence of the polycarbonate.     

Interfacial tension of demixed polymer solutions near the critical temperature: polystyrene + methylcyclohexane

Interfacial tension between demixed solutions of polystyrene + methylcyclohexane has been measured near the critical temperature as a function of temperature using polystyrenes with molecular weights 9000 ～ 1.26 × 10⁶. The critical exponent for the interfacial tension was determined to be about 1.30 for the lower molecular weight systems. However, for higher molecular weights the exponent could not be obtained because the system departed from critical behaviour. Magnitudes of the interfacial tension were proportional to about N^?0.44, where N is the polymerization index. Experimental results were compared with the recently-proposed theories and found to be in qualitative agreement. The tricritical theory of polymer solutions was also compared with the experimental results.     

A superconducting filter to separate an oxygen and argon mixture

Hot isostatic pressing in an oxygen atmosphere, known as O₂-HIP method, has been used successfully to synthesize oxide materials, as well as to produce porous materials. In this paper a porous superconducting oxide is synthesized by this method and its application as a gas filter is described. Porous superconductors can be used to separate a mixture of paramagnetic and diamagnetic gases, such as oxygen and argon. Separation occurs after a magnetic field is applied and is based on the Meissner effect. Experimental results showed that the oxygen content of an oxygen/argon mixture increased after passing through a filter with large pore size (about 10 m).     

Additional kernel observer: privilege escalation attack prevention mechanism focusing on system call privilege changes

International Journal of Information Security - Cyberattacks, especially attacks that exploit operating system vulnerabilities, have been increasing in recent years. In particular, if administrator...     

Scanning electron microscopy of nerve fibers in human fetal cochlea

The cochleas of four human fetuses ranging 22–25 weeks gestation were studied by scanning electron microscopy (SEM) for the purpose of obtaining a better understanding of the nerve fiber arrangement in the human ear. After critical point drying, the specimens were dissected and the floor of the tunnel of Corti and the outer wall of Nuel's space were exposed for observation. Upper cochlear turns, especially the apical turn, seemed to be still immature. Observed nerve fibers were classified into three types:

• 1 Spiral fibers: Fibers traveling basalward and following the shape of the cochlea were found in both the tunnel of Corti and Nuel's space and believed to be the afferent nerves responsible for innervating the outer hair cells
• 2 Radial fibers: radiating outward from the osseous spiral lamina—one such radial fiber transversing high in the tunnel space (supposedly the efferent nerve servicing the outer hair cells), and another sort of radial fiber (found crossing the tunnel floor), the nature of which was uncertain.
• 3 Irregular fibers: Consisting of thin, randomly running fibers within the cochlea. The destination of these fibers was not determined, but possibly they represent transitory nerve branchings of afferent or more probably efferent nerves, which would later regress during maturation.

     

An Advanced Oscillation Mixing Method for Improving the Cooling Uniformity in Quenching

In quenching, the cooling uniformity is most important to diminish distortion occurring on work pieces. As a trial to accomplish uniform cooling, therefore, there exist various mixing methods of a quenchant and the quenchant circulation with an external pump has so far been the well accepted mixing method. However, this study proposes an advanced oscillation mixing method that can improve more the cooling uniformity in quenching. The proposed method includes a stirrer in oscillating motion, so that the simultaneous oscillating and mixing movements of the stirrer are considered to provide efecfively the uniform cooling characteristics for the quenchant. In comparison with the case of the circulation pump mixing, the investigation using the oscillation mixing method has demonstrated the following two experimental facts:(1) the short vapor blanket stage caused by the quick breakage of the oil vapor blanket and (2) the reduced variation of the quenching distortion.     

Microstructure development of steel during severe plastic deformation

The microstructure development during plastic deformation was reviewed for iron and steel which were subjected to cold rolling or mechanical milling (MM) treatment, and the change in strengthening mechanism caused by the severe plastic deformation (SPD) was also discussed in terms of ultra grain refinement behavior. The microstructure of cold-rolled iron is characterized by a typical dislocation cell structure, where the strength can be explained by dislocation strengthening. It was confirmed that the increase in dislocation density by cold working is limited at 10¹⁶m⁻², which means the maximum hardness obtained by dislocation strengthening is HV3.7 GPa. However, the iron is abnormally work-hardened over the maximum dislocation strengthening by SPD of MM because of the ultra grain refinement caused by the SPD. In addition, impurity of carbon plays an important role in such grain refinement: the carbon addition leads to the formation of nano-crystallized structure in iron.     

Negative bias illumination stress assessment of indium gallium zinc oxide thin‐film transistors

Electrical performance stability of indium gallium zinc oxide (IGZO) thin‐film transistors (TFTs) is evaluated under negative bias illumination stress (NBIS). A bottom‐gate IGZO TFT whose top surface is passivated with zinc tin silicon oxide (ZTSO) exhibits a dramatic improvement in NBIS stability compared with that of an unpassivated, bottom‐gate IGZO TFT. Oxygen chemisorption/desorption at the channel layer top surface is proposed to explain why an unpassivated TFT exhibits significantly more NBIS than a passivated TFT.