银粉对PZT压电陶瓷电极表面结构和性能的影响

本文重点讨论不同银粉对PZT（PbZrO3-PbTiO3)压电陶瓷电极表面结构及性能的影响。选择合适的银粉，配制成银浆，可以烧结出结构平整，致密，性能优良的PZT表面银电极。     

钛合金与铌合金电子束焊温度场数值模拟

钛合金与铌合金是具有优良使用性能的两种合金材料,这两种材料被广泛用于航空、航天、核工业等重要领域.文中采用有限元分析软件ANSYS,对钛合金与铌合金电子束焊的温度场进行了模拟研究,利用双热源模型模拟电子束焊温度场,研究了异种金属焊接的建模方法、函数载荷的加载技巧,着重分析了钛合金(7715D)和铌合金(C-103)的焊接性,采用热源向铌一侧偏置的方法来保证焊接熔深的一致.最后得到了不同焊接热输入条件下钛合金与铌合金焊接过程中的最佳偏置距离.     

Ti-26高强钛合金斜轧穿孔工艺研究

研究了Ti-26高强钛合金斜轧穿孔制备管坯工艺。测试了穿制的Ti-26合金管坯的力学性能，用金相显微镜观察了管坯的显微组织，用扫描电镜分析了拉伸断口的形貌。结果表明，采用斜轧穿孔方式完全可以制备Ti-26高强钛合金管坯；在1050℃下，选择合适的轧辊转速和前进角可顺利穿制Ti-26高强钛合金管坯，其管坯的强度为815MPa，延伸率达到13％，断面收缩率达到45％，晶粒度按ASTME标准为6级，比穿孔前细化，断口呈明显的塑性断口，加工管材无需热处理可以直接进行轧制，道次加工率可达45．8％。     

Low temperature bonding of LD31 aluminum alloys by electric brush plating Ni and Cu coatings

0Introduction Amongavarietyofbondingtechnologies,vacuum brazinghasbeenwidelyadoptedasareliablemethodfor joiningaluminumcomponents[1],whereintheAl Sialloys systemisrecognizedasthemostpopularfillermetals[2,3]. Althoughasoundjointcanbeachievedforcertainalumi…     

电子束焊接工艺文档编制与管理系统

采用面向对象编程技术开发实现了对焊接工程项目工艺流程档的计算机管理(具备对记录的检索、添加、删除、修改、复制和打印功能)以及对电子束焊接工艺数据(包括母材、焊机、焊材、接头图和焊接工艺参数等)的存储和管理。设计了电子束焊接工艺知识咨询模块，以实现整理、保存和传播电子束焊接知识的功能。系统具有友好的人机界面、良好的使用性能和较高的数据安全性及防错能力。     

宝钢Nol初轧机工作辊的热处理

通过喷雾淬火的工艺方法对Φ1350mm×7255mm,重42t的初轧机工作辊进行调质试验,各项检验结果完全满足了技术条件要求,达到了试验目的。     

CALCULATION OF TRANSFORMATION VOLUME FRACTION TO HQ590 HOT ROLLED STRIP STEEL DURING CONTINUOUS COOLING

On the basis of phase transformation kinetics, the transformation of γ→α,P,B have been investigated through considering the effect of deformation. The calculation methods of volume fraction have also been given. Comparing with common method, the simulated results are in more agreement with experiment results.     

STUDY ON THE SHOCK WAVE CRYSTALLIZATION OF AMORPHOUS ALLOYS BY DSC

Shock wave and annealing crystallization of amorphous alloys FeSiB, FeMoSiB and FeCuNbSiB were studied by isothermal and non-isothermal DSC technique. It was found that the shock wave crystallization is very perfect, the fraction crystallized is very close to 100%, though the period of crystallization is very short, only about 10-4-10-6s. Their produced phases differ from the parent phase in structure and composition. The high velocity of the transformation is very difficult to explain by the diffusion theory of solid state phase transition.     

A STUDY OF B-P UNIFIED VISCOPLASTIC CONSTITUTIVE MODEL

By combining the Bodner-Partom constitutive model and equivalent stress function, finite element methods and program on analyzing non-elastic deformation and stress for thermal viscoplastic material are studied in this paper, and it's the first time that this material model is used in a kind of engineering software-MARC. Thermal viscoplastic behavior of high temperature alloy GH536 specimen with gap is analyzed by this program. The research results show it is feasible to analyze thermal viscoplastic behavior of specimen or structure by applying B-P model.