预变形对X90管线钢显微组织和力学性能的影响

采用拉伸试验、冲击试验、光学显微镜(OM)、扫描电镜(SEM)、显微硬度测试仪等研究了0.5%~6%预拉伸变形对X90管线钢显微组织及力学性能的影响。结果表明:随着预拉伸变形量的增加,X90管线钢晶粒增大,位错塞积导致强度增加,均匀延伸率下降,呈现典型的加工硬化特点,抗拉强度的增幅要小于屈服强度,屈强比增大;随着变形量的增加冲击吸收功逐渐由291J减小至235J,冲击试样断口的韧窝减小,伴随第二相粒子析出;显微硬度中间层较边缘区增加少,预拉伸在6%时边缘显微硬度为325HV。X90管线钢的预拉伸在4%以内能保证管线钢的正常服役。     

无线传感器网络感知节点的I~2C设备驱动设计与实现

针对I2C总线在控制外围设备方面的优势,提出了将I2C总线应用于无线传感器网络中感知节点传感器接入的方案,分析了I2C总线协议的数据传输流程,设计了基于TinyOS的I2C总线设备驱动程序架构,并实现了以ATmega 1281为微处理器的感知节点中光照传感器ISL29002的驱动程序;该驱动程序可以成功驱动传感器并已用于西北温室群监控系统中,应用表明驱动程序能够长期稳定工作。     

一种强安全约束机制下的云计算任务调度方案

针对云计算技术中的资源调度时间长、开销大、不考虑调度安全的问题,本文在对常见的云环境下工作流任务的资源调度问题进行建模的基础上,提出了一种强安全约束机制下的云计算任务调度方案。该方案按照所用方法的安全强度,再加上相关软件的安全程度,赋予虚拟机不同的安全等级;另一方面,其按照用户的需求等诸多方面,能够赋予操作不同的安全需求等级;最后使用变近邻粒子群算法对该问题进行了求解。在CloudSim仿真平台上的实验结果证明,本文提出的算法与用最大－最小蚁群算法、遗传算法与该算法相比,该算法具有很好的可用性和寻优能力。     

一类非线性系统的间接自适应模糊滑模控制

基于启发式知识的模糊控制是一种解决非线性系统控制问题的有效方法。然而其设计缺乏系统性,并且系统的稳定性和鲁棒性难以保证。本文利用滑模控制的概念和Lyapunov综合方法提出一种针对一类非线性系统的间接自适应模糊滑模控制（IAFSMC）方法。仿真研究表明即使在缺少系统先验知识和不确定性干扰的情况下,系统性能也十分理想。     

扩展Oracle Spatial实现跨服务器的空间数据管理*

海量空间数据的管理需要多服务器的支持,空间数据的跨服务器操作是必须解决的关键问题。针对Oracle数据库系统的Client／Server体系在管理跨服务器空间数据中存在的问题,利用远程内嵌过程和触发器等相关技术,设计并扩展了Oracle Spatial的功能,实现了基于Oracle的空间数据跨服务器分布式管理。     

Thermo-plasticity of high-strength and high-ductility 7050 aluminum ingot

Thermo-plasticity of homogenized 7050 aluminum ingot was investigated by instantaneous tensile tests conducted at different temperatures. The results show that, with the increase of testing temperatures, the strength decreases, and the plasticity increases firstly and then decreases in homogenized 7050 ingot. When the studied alloy is deformed between 380 °C and 420 °C, the deformation resistance is lower and plasticity is better. And the actual heating temperature for ingot before hot extrusion should be controlled between 360 °C and 400 °C. At low tensile temperatures, the deformation structure is mainly composed of dislocation substructure. With the increase of testing temperatures, transgranular fracture transforms into intergranular fracture progressively during deformation. At high tensile temperatures, the grain boundaries are weakened, deformation is concentrated at the grain boundaries and the re-orientation of equilibrium phases at grain boundaries appears.     

Hot compressive deformation behavior and constitutive relationship of Al-Zn-Mg-Zr alloy with trace amounts of Sc

Abstract： The hot deformation behaviors of AI-Zn-Mg-Sc-Zr alloy were investigated in a temperature range of 340-500℃ and a strain rate range of 0.001-10 s 1 using uniaxial compression test on Gleeble-1500 thermal simulation machine. The results show that the flow stress increases with increasing strain and tends to be constant after a peak value. The flow stress increases with increasing strain rate and decreases with increasing deformation temperature. The phenomenon of dynamic recovery and dynamic recrystallization can be observed by microstructural evolutions. Based on the hyperbolic Arrhenius-type equation, the true stress-true strain data from the tests were employed to establish the constitutive equation considering the effect of the true strain on material constants （α, β, Q, n and A）, which reveals the dependence of the flow stress on strain, strain rate and deformation temperature. The predicted stress-strain curves are in good agreement with experimental results, which confirms that the developed constitutive equations are suitable to research the hot deformation behaviors of Al-Zn-Mg-Sc-Zr alloy.     

简论企业知识管理的有关问题

知识管理已成为企业管理活动的主要内容.企业知识管理是以知识为核心的,不同于信息管理是通过知识共享来实现的企业管理活动.讨论了企业知识管理的涵义、原则、类型特征以及知识管理的开发.