Influence of halide ions and alloy microstructure on the passive and localized corrosion behavior of alloy 22

Alloy 22 (N06022) is the current candidate alloy used to fabricate the external wall of the high-level nuclear waste containers for the Yucca Mountain repository. It was of interest to study and compare the general and localized corrosion susceptibility of Alloy 22 in fluoride and chloride solutions at 90 °C. Standard electrochemical tests such as cyclic potentiodynamic polarization, amperometry, and electrochemical impedance spectroscopy were used. Studied variables included the solution pH and the alloy microstructure (thermal aging). Results show that Alloy 22 is highly resistant to general corrosion in all the solutions tested. Thermal aging is not detrimental and even seems to be slightly beneficial for general corrosion at the higher solution pHs. Pitting corrosion was never observed. Crevice corrosion was found only for high chloride-containing solutions after anodic polarization. The presence of fluoride ions together with chloride ions seems to increase the susceptibility of Alloy 22 to crevice corrosion compared to pure chloride solutions. This article is based on a presentation made in the symposium “Effect of Processing on Materials Properties for Nuclear Waste Disposition,” November 10–11, 2003, at the TMS Fall meeting in Chicago, Illinois, under the joint auspices of the TMS Corrosion and Environmental Effects and Nuclear Materials Committees.     

4-(2-噻唑偶氮)-5-二甲氨基苯胺与铑(Ⅲ)显色反应研究及其应用

研究了显色剂 4 ( 2 噻唑偶氮 ) 5 二甲氨基苯胺 (简称TADMA)与铑 的显色反应。结果表明 ,在 pH3 2～ 4 8范围内 ,铑 与TADMA反应形成 1∶2红色络合物 ,加入无机酸后色泽加深 ,络合物的表观摩尔吸光系数为 1 2 1× 10 5,铑质量浓度在 0～ 0 92 μg/mL范围内服从比尔定律。本方法操作简便 ,灵敏度高 ,选择性好 ,常见金属离子在一定范围内无干扰 ,用于催化剂中微量铑的测定 ,结果满意     

Study of the morphology and mechanical properties of polypropylene composites with silica or rice‐husk

The mechanical, morphological behavior and water absorption characteristics of polypropylene (PP) and silica, or PP and rice‐husk, composites have been studied. The silica used in this study as filler was a commercial type produced from soluble glass or rice husks. The compatibilizing effect of PP grafted with monomethyl itaconate (PP‐g‐MMI) and/or with vinyltriethoxysilane (PP‐g‐VTES) as polar monomers on the mechanical properties and water absorption was also investigated. In general, a high loading of the studied fillers in the polymer matrix increases the stiffness and the water absorption capacity. This effect is more noticeable in the tensile modulus of the PP/silica composite with PP‐g‐VTES as compatibilizer. However, the increase of the rice‐husk charge as a natural filler in the PP matrix decreases the stiffness, and in the presence of PP‐g‐MMI as compatibilizer in PP/rice‐husk, the tensile modulus and water absorption of the composite were improved. The better adhesion and phase continuity in the PP/silica and PP/rice‐husk composites with different compatibilizers was confirmed by the morphological study. Copyright © 2004 Society of Chemical Industry     

The in vivo metabolic pattern of low-grade brain gliomas: a positron emission tomographic study using 18F-fluorodeoxyglucose and 11C-L-methylmethionine

OBJECTIVE: The object of the present study was to identify metabolic differences between low-grade astrocytomas and oligodendrogliomas and to improve their diagnosis and noninvasive assessment, because both types of tumors look very similar from the point of view of clinical and radiological data (as assessed by computed tomography and magnetic resonance imaging). METHODS: Before any aggressive treatment, 22 patients with primary low-grade gliomas (astrocytomas in 12 patients and oligodendrogliomas in 10) were investigated with positron emission tomography for both glucose metabolism (18F-fluorodeoxyglucose) and amino acid uptake (11C-L-methylmethionine). An original software that allows a full metabolic analysis of the tumor region of interest (defined from the T1-weighted magnetic resonance image) and compares tumor tissue uptake tracer concentrations with average healthy tissue values has been implemented for data processing. Heterogeneity of each individual tumor has been taken into account and was expressed in histograms, which provided data about the mean and also extreme and intermediate values of tracer concentrations and the way these values are distributed among the full tumor mass. RESULTS: It has been shown that both tumor types exhibit a glucose hypometabolism (slightly more pronounced with astrocytomas), whereas they strongly differ in methionine uptake, which is high in all oligodendrogliomas and either decreased, normal, or moderately increased in astrocytomas. This latter metabolic difference between both tumor populations may be partially explained by their different cell densities. CONCLUSION: This study suggests that despite similar radiological and clinical presentations, these two kinds of low-grade gliomas are metabolically different and could therefore have specific responses to different therapies. Moreover, their in vivo metabolic follow-up with positron emission tomography should rely on different parameters, depending on their histological type; methionine uptake may be more relevant than glucose metabolism in the follow-up of oligodendrogliomas.     

SCID-Hu mouse as a model for human lung HIV-1 infection

HIV induces a multi-organ infection with a dual tropism for both lymphocytes and monocytes/macrophages. The lung is a target both for HIV infection and HIV-related opportunistic infections. The SCID mouse has provided the opportunity to develop a small animal model for HIV infection. However, HIV-1 infection of the human fetal thymus and liver (SCID Liv/Thy) implanted in these mice occurred only after direct intraimplant injection of HIV-1 and the resultant HIV-1 infection was restricted to the human thymus. Here we report that human foetal lung can develop in SCID Liv/Thy mice resulting in the development of normal human alveolar and bronchiolar lung compartments which can be productively infected with cell-free HIV-1 virus, leading to a systemic and bifocal infection. This SCID-Hu model should be useful for studying AIDS physiopathology, human viruses with lung tropism and for helping to define gene therapy protocols in lung human cells in vivo.     

Cytotoxicity versus antibacterial activity of some antiseptics in vitro

The relationship between endometriosis and infertility is observed frequently. Patients with both conditions require a conservative approach to their management. Since hormonal therapy is one of those approaches, we sought to compare the efficacy of Danazol and Gestrinone in 80 infertile patients (48 and 32, respectively). Therapy lasted 6 months in both treatment groups, and all patients studied had laboratory tests performed and were clinically evaluated and classified through laparoscopy before and after therapy. The improvement of symptoms and favorable follow-up were similar with both treatments. The reestablishment of menstrual patterns and fertility were also nearly alike in both groups. However, Gestrinone was associated with fewer secondary effects and is easier to administer than Danazol. We conclude that Gestrinone is a useful medication in the management of the infertile patient with endometriosis.     

In-Situ and Real-Time Investigation of Columnar-to-Equiaxed Transition in Metallic Alloy

In this article, we present a review of observations during Al-3.5 wt pct Ni alloy solidi.cation experiments performed at the European Synchrotron Radiation Facility (ESRF) in Grenoble. These experiments provide direct access to dynamical phenomena during columnar growth (initial transient and breakdown of a planar solid-liquid interface), and for the first time to the transition from columnar-to-equiaxed microstructure (nucleation ahead of a columnar front and blocking of a columnar front by an equiaxed microstructure) and fully equiaxed growth (propagation of an effective front). Based on these experimental observations, critical parameters such as columnar growth velocity variation during the transition or equiaxed-grain diameter are measured and discussed. This article is based on a presentation made in the symposium entitled “Solidi.cation Modeling and Microstructure Formation: In Honor of Prof. John Hunt,” which occurred March 13–15, 2006, during the TMS Spring Meeting in San Antonio, Texas, under the auspices of the TMS Materials Processing and Manufacturing Division, Solidification Committee.     

Glyconanoparticle-DNA interactions: an atomic force microscopy study.

Glyconanoparticles which present carbohydrate and amino groups motifs at their surface were produced. These particles were highly stable and soluble in aqueous solutions. The presence of the carbohydrate groups also allowed the inclusion of more strongly binding groups, without affecting solubility. The binding of a model DNA, plasmid by these nanoparticles was studied by atomic force microscopy, transmission electron microscopy, and gel electrophoresis. Significant differences between the nanoparticles based on their affinities for the DNA were found, with implications for their potential use as nonviral gene delivery agents.