深圳市某商住楼通风空调设计

本文简要介绍深圳某商住楼通风空调系统、水系统的设计及空调方式的选取、简述了各项设计的技术数据,可供同行参考。     

Self-assembly of highly oriented palladium-based nanowires on mica surface

The self-assembly of various nanostructures is recently attracting a great deal of research attention. In this paper, we demonstrate that a palladium chloride aqueous solution, mixed with a proper ammonia solution, can produce Tetra-amminepalladous chloride (Pd(NH₃)₄Cl₂·H₂O) nanowires. These nanowires can spontaneously form the two-dimensional hexagon-oriented Pd(NH₃)₄Cl₂·H₂O arrays on mica surfaces. We can control the length and height of these nanowires by adjusting their deposit time on the mica substrate. This method can be potentially used in making sensors or in making templates to wire and position nanodevices.     

从环己烷氧化液酸洗水中回收己二酸的技术进展

介绍了由环己烷氧化液酸洗水中回收副产的己二酸的方法,主要分析了溶剂萃取法、氧化法、皂化-酯化法的特点及其存在的缺点,指出今后应着重开发新型的己二酸萃取剂,寻求环保型的化学回收方法,并加强对酸洗水新型氧化剂的研究。     

Study on Reduction of Sulfur Content in FCC Gasoline

Reduction of sulfur content in FCC gasoline was studied in a fixed fluid bed (FFB) unit by using metal-modified LV-23 FCC catalyst. The results showed that the sulfur content in FCC gasoline could be reduced with LV-23 catalyst modified with zinc, palladium, zinc-palladium, zinc-cobalt, and zinc-nickel. Among these metals or metal combinations, palladium-containing catalyst was the most effective. Desulfufization of the heavy fraction of FCC gasoline was more effective than full-range gasoline under the same conditions with palladium-containing catalysts. A high reaction temperature was favorable to desulfurization, but it would reduce the yield of liquid product. After desulfurization reaction, the olefm content of product gasoline decreased while the aromatic and iso-alkane contents increased. Removal of thiophene and benzothiophene is higher.     

光纤光栅视觉系统

利用光学衍射原理，研制成了光纤光栅衍射屏，并与计算机神经网络相结合，开发了了一种识别立体形状的视觉系统。本文介绍了光纤光栅的设计原理及计算方法，给出了系统的总体结构及工作原理，完成了三棱 柱，三棱锥、四棱柱，四棱锥和球等立体形状学习与识别，并讨论了实验结果。     

Characterization of proton-exchanged optical waveguides in ZnO:LiNbO3

We report the first demonstration of proton-exchanged optical planar waveguides in x-cut and z-cut LiNbO₃ doped with 6 mol% ZnO using adipic acid as proton source. These waveguides exhibit a graded index profile which can be modeled by a linear step function with a surface index increase of 0.135 and 0.14 for x-cut and z-cut waveguides, respectively. The diffusion constant D_o and the activation energy Q are characterized optically to be 1.64×10⁹ μm²/h and 88.8 KJ/mol for x-cut waveguides, and 1.478×10⁹ μm²/h and 91.25 KJ/mol for z-cut waveguides, respectively. The diffusion rate along the z-axis is slower than that along the x-axis, whereas the surface index increase on z-cut waveguides is larger than that on x-cut waveguides.     

本钢烧结矿冷却及其余热回收的试验研究

从烧结矿冷却并回收其余热的角度出发，介绍了利用烧结机尾落矿空间，采用喷吹空气装置对烧结矿进行冷却的小型模拟试验，从测出的结果来看，有可能成为一种新的烧结矿冷却方式。     

激光实际大气传输湍流效应相位校正一些实验结果

进行了近地面水平大气中激光传输湍流效应及其自适应光学相位校正实验，对光束振幅起伏、到达角起伏及其远场Strehl比进行了测量分析。实验结果表明，光束到达角起伏功率谱在低频段（f＜0．4υ／d）近似地满足-2/3次幂关系，而在高频段（f＞0．4υ／d）则近似满足-8／3次幂关系。在较弱湍流效应情况下时数振幅起伏方差小于0．3），相位补偿是有效的，而在较强湍流效应树数振福起伏饱和）时，自适应光学系统常常不能实现稳定闭环。由于传输场景地形复杂，湍流效应及其相位校正效果定量规律的描述还需进一步研究。     

几种火焰喷焊自熔性合金层的耐磨性能

研究了不同自熔性合金粉末火焰喷焊层的显微组织与抗磨粒磨损性能，并对其磨面形貌进行了ＳＥＭ观察分析。结果表明，在Ｎｉ６０自熔性合金中加入适量的镍包ＷＣ粉末可明显提高其喷焊层的抗磨粒磨损性能。当ＷＣ的加入量为３５％（ｗｔ）左右时，该喷焊层与６０Ｓｉ２Ｍｎ调质钢相比，相对的耐磨性可提高６倍以上。