Asymmetric cellulose acetate dialysis membranes: Synthesis,characterization, and performance

Cellulose acetate (CA) is highly comparable to other synthetic polymer materials and is effective in the hemodialysis process. In this work, asymmetric CA membranes were synthesized with the phase‐inversion method. CA with a molecular weight of 52,000, poly(ethylene glycol) (PEG) with a molecular weight of 400, and 1‐methyl‐2‐pyrrolidone (NMP) were used as the polymer, additive, and solvent, respectively. The effects of the CA and PEG concentrations and coagulation bath temperature (CBT) on the morphology, pure water permeability (PWP), insulin/human serum albumin (HSA) transmission, and finally thermal and chemical stability of the prepared membranes were determined and investigated. In general, increasing the PEG concentration and CBT and reducing the CA concentration resulted in increased PWP and insulin/HSA transmission. Also, these variations facilitated the formation of macrovoids in the membrane sublayer. On the other hand, increasing the PEG and CA concentrations and reducing CBT resulted in increased thermal and chemical stability of the prepared membranes. Also, ratios of 15.5/10/74.5 and 17.5/10/72.5 (w/w) for the CA/PEG/NMP casting solutions and their immersion into coagulation baths with CBTs of 0 and 25°C, respectively, resulted in the preparation of membranes that had not only optimum sieving properties and higher PWP but also thermal and chemical stability better than that of conventional CA hemodialysis membranes. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Pressureless sintering of boron carbide

The effect of small Al addition on pressureless-sintering and mechanical properties of B₄C ceramic was analyzed. Different amounts of aluminium powder, from 0% to 5 wt%, were added to the base material and pressureless-sintering was conducted at 2050 and 2150 °C under argon atmosphere. Microstructure, crystalline phases, density evolution, fracture strength, elastic modulus, hardness and fracture toughness were analyzed and correlated to Al additions and firing temperature. Density and grain size of sintered samples increased significantly with Al load while the effect of sintering temperature was less evident; 94% dense material was obtained by adding 4 wt% Al. Bending strength, hardness and fracture toughness of sintered B₄C samples were shown to increase for Al content up to 4 wt% while further additions resulted in a decrease of the mechanical resistance. Conversely, elastic modulus showed an increase with Al load especially between 1 and 3 wt%.     

Dye binary mixture formulation by means of derivative ratio spectra of the Kubelka–Munk function

In this study, a new method is introduced for the determination of dye concentration in fabrics dyed with bicomponent dye mixtures. The reflectance spectra of the samples dyed with different binary mixtures of dyes were recorded between 400 and 700 nm. The obtained spectra were divided by a standard spectrum of each of the components in the mixtures and the derivative spectra were calculated. The amounts of dyes were determined by measurements in suitably selected wavelengths in the acquired derivative ratio spectra. The obtained results indicate that the developed derivative ratio spectra method is more accurate than the normal Kubelka–Munk method. The proposed derivative method is simple, accurate, and suitable for quantitative analysis of samples dyed with binary mixed shades. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2010     

Clarifying the effects of comonomer distribution between short and long chains on physical and mechanical properties of ethylenic copolymers

In this paper, two Zigler-Natta catalysts (ZNCs) were used to synthesize a commercially available linear low-density polyethylene (LLDPE), widely used in the packaging industry, on an industrial scale. The catalysts differ only in their ability to distribute comonomers between short and long chains. Both catalysts were fully characterized in the first section, and two similar ethylene/1-butene copolymers were made using them. Afterward, the produced copolymers were fully characterized using different techniques; namely, differential scanning calorimetry (DSC), successive self-nucleation and annealing (SSA), oxygen induction time (OIT), melt flow index (MFI), rheometric mechanical spectroscopy (RMS), and a wide range of mechanical experiments. It was revealed that while the presence of comonomers in short chains can reduce their resistance against oxidation (by more than 30%) and can cause a dramatic change in friction coefficients (by more than 20%), some of the other main mechanical properties of the made copolymers were independent of comonomer distribution between long and short chains. In addition, it was shown that ethylenic copolymers' strain hardening modulus (SHM) takes advantage of the homogenous distribution.     

The Effects of SiO2/Al2O3 and H2O/Al2O3 Molar Ratios on SAPO-34 Catalyst in the Methanol to Olefin Process

Silicon - Informed through synthesis and characterization of NH 3 TPD, BET techniques, the current study investigated the right contribution of silicon and water content on a 9 sample SAPO-34...     

The effect of chemical crosslinking on the properties of Rotomolded high density polyethylene

In this study, high density polyethylene (HDPE) was combined with dicumyl peroxide (DCP) to produce crosslinked parts via rotational molding. The effect of DCP content (0.1–2.5 phr) on the crosslinking degree was investigated to determine its effect on the chemical, mechanical, physical, and thermal properties of HDPE. The gel content and crosslink density was found to increase with DCP content. These trends led to a reduction in the degree of crystallinity, melting, and crystallization temperature. Thermogravimetric analysis (TGA) showed that crosslinked HDPE (xHDPE) has higher thermal stability than the neat matrix in both air and nitrogen atmosphere. In addition, a direct relationship was observed between improved thermal resistance and higher impact strength. Finally, relationships between the tensile properties of xHDPE and the degree of crystallinity were observed, which were all controlled by the level of crosslinking. These results have the potential to advance the manufacturing of high performance materials suitable for a wide range of applications such as automotive parts, agricultural products, chemical storage tanks, large waste containers, and fuel tanks in general.     

Simple Method for Prediction of the Standard Gibbs Free Energy of Formation of Energetic Compounds

A reliable simple method for prediction of the standard Gibbs energy of formation (Δ_fG^θ) of energetic compounds containing nitroaromatic, acyclic, and cyclic nitramine, nitrate ester, and nitroaliphatic compounds is introduced herein. The method is based on the contribution of elemental composition (Δ_fG_elem^θ) and the correcting function for the presence of additive and non‐additive molecular fragments (Δ_fG_corr^θ). In presence of some molecular moieties, Δ_fG_corr^θ may increase or decrease the value of Δ_fG_elem^θ, depending on the intermolecular interactions. The experimental root‐mean‐square error (RMSE) of the novel correlation (22.7 kJ mol⁻¹) is quite good. For some energetic compounds, where the computed values of two complex models of the quantitative structure‐property relationship (QSPR) theory were available, the experimental RMSE developed by the new method is smaller than the values obtained by QSPR method.     

Effect of high temperature annealing on scratch behavior of acrylonitrile styrene acrylate copolymers

The scratch behavior of butyl-acrylate rubber-modified styrene-acrylonitrile (ASA) upon high temperature annealing is investigated following the ASTM D7027/ISO 19252 linearly increasing normal load test methodology. The critical normal loads at the onset of the major deformation transitions along the scratch path, such as groove formation, scratch visibility, microcrack formation, and plowing, are reported and quantitatively analyzed. It is found that the scratch resistance improves with high temperature annealing, i.e., 30 °C above T_g, as compared to annealing below or around T_g. Microscopic investigation suggests that the increase in scratch resistance is related to the changes in surface morphology of the polymer. It is concluded that performing high temperature annealing enhances the scratch performance without compromising ASA bulk properties. Implication of the present study for improving scratch resistance of polymers is discussed.     

Optimal design of laser solid freeform fabrication system and real-time prediction of melt pool geometry using intelligent evolutionary algorithms

With the rapid growth of laser applications and the introduction of high efficiency lasers (e.g. fiber lasers), laser material processing has gained increasing importance in a variety of industries. Among the applications of laser technology, laser cladding has received significant attention due to its high potential for material processing such as metallic coating, high value component repair, prototyping, and even low-volume manufacturing. In this paper, two optimization methods have been applied to obtain optimal operating parameters of Laser Solid Freeform Fabrication Process (LSFF) as a real world engineering problem. First, Particle Swarm Optimization (PSO) algorithm was implemented for real-time prediction of melt pool geometry. Then, a hybrid evolutionary algorithm called Self-organizing Pareto based Evolutionary Algorithm (SOPEA) was proposed to find the optimal process parameters. For further assurance on the performance of the proposed optimization technique, it was compared to some well-known vector optimization algorithms such as Non-dominated Sorting Genetic Algorithm (NSGA-II) and Strength Pareto Evolutionary Algorithm (SPEA 2). Thereafter, it was applied for simultaneous optimization of clad height and melt pool depth in LSFF process. Since there is no exact mathematical model for the clad height (deposited layer thickness) and the melt pool depth, the authors developed two Adaptive Neuro-Fuzzy Inference Systems (ANFIS) to estimate these two process parameters. Optimization procedure being done, the archived non-dominated solutions were surveyed to find the appropriate ranges of process parameters with acceptable dilutions. Finally, the selected optimal ranges were used to find a case with the minimum rapid prototyping time. The results indicate the acceptable potential of evolutionary strategies for controlling and optimization of LSFF process as a complicated engineering problem.