Microstructural development and creep deformation in equiaxed γ, γ+α 2, and γ+α 2+B2 titanium aluminides

The development of microstructure and its influence on creep properties have been studied for structures including equiaxed γ, duplex, and other structures of varying α ₂ morphology in two Ti-48Al-2Cr-2Nb alloys. Heat treatments at 1125 °C have been utilized to produce equiaxed γ microstructures in alloys with or without Mo additions. The γ → α transformation produces α ₂ plates with several orientation variants within γ grains during subsequent annealing of the equiaxed γ microstructures below the α transus. Formation of this α ₂ morphology results from rapid up-quenching (UQ), and this structure persists through annealing, cooling, and creep testing. Differences in minimum creep rates for several microstructures containing varying amounts of multi- or single variant γ/α ₂ grains are shown to be minimal. The presence of Mo has also resulted in improved creep resistance in equiaxed γ and γ+α ₂+B2 structures, as compared to similar microstructures in the Ti-48Al-2Cr-2Nb alloy. Deformation during creep at 760 °C at stresses between 200 and 400 MPa occurs by a combination of twinning and dislocation glide without recrystallization, resulting in power-law stress exponents in the range of 6 to 9. Only minimal strain path dependence of the minimum creep rate is detected in a comparison of creep rates in stress jump, stress drop, and single stress tests. This article is based on a presentation made in the symposium “Fundamentals of Gamma Titanium Aluminides,” presented at the TMS Annual Meeting, February 10–12, 1997, Orlando, Florida, under the auspices of the ASM/MSD Flow & Fracture and Phase Transformations Committees.     

Evidence of successful river spawning by lake trout (Salvelinus namaycush) in the Lower Niagara River,Lake Ontario

Restoration of a wild-produced lake trout Salvelinus namaycush population in Lake Ontario has not been successful despite the adult population often meeting or exceeding restoration targets. Lack of high-quality spawning habitat in Lake Ontario is suggested as one impediment to recruitment of wild lake trout, although the quantity and location of spawning habitat is poorly understood. If high-quality spawning habitat is limited in Lake Ontario, lake trout may be using uncommon spawning locations such as rivers. Anecdotal angler accounts point to the Niagara River as a lake trout spawning location. To better understand the potential of the Niagara River as a spawning location, egg and juvenile fish collections were conducted 12–14 river kilometers from the mouth of the Niagara River from 2010 to 2012; and mature female lake trout with surgically implanted acoustic tags were monitored from 2015 to 2019. Genetic analyses confirmed 60% of collected eggs and 93% of collected post-hatch juvenile fish in the Niagara River were lake trout. Tagged female lake trout returned to the Niagara River over consecutive years during the spawning season. The short duration of lake trout presence in the river (mean = 56 days/year) suggests female lake trout use the Niagara River primarily for spawning. Diversity in spawning locations may provide lake trout population’s resilience against environmental variability through a portfolio effect. Improved identification of riverine spawning locations, including their overall contribution to wild recruitment, may be a useful tool for managers to restore a wild-produced population of lake trout in Lake Ontario.     

Intelligent monitor for typhoon in IoT system of smart city

The Journal of Supercomputing - Accidents often occur in the earth—typhoons, floods, earthquakes, traffic accidents and so on. Whether these accidents can be timely and effectively responded...     

Correction to: Non-congruent non-degenerate curves with identical signatures

Journal of Mathematical Imaging and Vision - A correction to this paper has been published: https://doi.org/10.1007/s10851-021-01028-0     

A Model of Weekly Labor Participation for a Belgian Synthetic Population

This paper presents a model of labor participation calibrated on a weekly basis; part-time and full-time employments are also considered. By applying the theory of random utility maximization we model households’ choices. In order to have a good temporal and spatial coverage the model is calibrated on three datasets, extracted from both national and regional travel surveys. The results are applied to synthetic households that reproduce the Belgian population. The proposed innovative methodology simulates synthetic agents by accounting both for households’ and individuals’ characteristics, while not suffering from the problem of the “zero cell value”. The results indicate that there is major day-to-day variability in working activity participation; in particular, on Wednesdays and Fridays the number of households working part-time or not working is particularly high. This is consistent with what was expected by the analysts. Working participation is a fundamental component in activity based models where work is considered a skeletal activity. The tools developed here can be useful to study how changes in population characteristics (i.e. increases of flexible working arrangements and of the number of women in the work force) affect activity participation and travel patterns.     

Surface characterization of 6H-SiC (0001) substrates in indentation and abrasive machining

Surface characterization of 6H-SiC (0001) substrates in indentation and abrasive machining was carried out to investigate microfracture, residual damage, and surface roughness associated with material removal and surface generation. Brittle versus plastic deformation was studied using Vickers indention and nano-indentation. To characterize the abrasive machining response, the 6H-SiC (0001) substrates were ground using diamond wheels with grit sizes of 25, 15 and 7 μm, and then polished with diamond suspensions of 3 and 0.05 μm. It is found that in indentation, there was a scale effect for brittle versus plastic deformation in 6H-SiC substrates. Also, in grinding, the scales of fracture and surface roughness of the substrates decreased with a decrease in diamond grit size. However, in polishing, a reduction in grit size of diamond suspensions gave no significant improvement in surface roughness. Furthermore, the results showed that fracture-free 6H-SiC (0001) surfaces were generated in polishing with the existence of the residual crystal defects, which were associated with the origin of defects in single crystal growth.     

Rational Design of CYP3A4 Inhibitors: A One-Atom Linker Elongation in Ritonavir-Like Compounds Leads to a Marked Improvement in the Binding Strength

Inhibition of the major human drug-metabolizing cytochrome P450 3A4 (CYP3A4) by pharmaceuticals and other xenobiotics could lead to toxicity, drug–drug interactions and other adverse effects, as well as pharmacoenhancement. Despite serious clinical implications, the structural basis and attributes required for the potent inhibition of CYP3A4 remain to be established. We utilized a rational inhibitor design to investigate the structure–activity relationships in the analogues of ritonavir, the most potent CYP3A4 inhibitor in clinical use. This study elucidated the optimal length of the head-group spacer using eleven (series V) analogues with the R₁/R₂ side-groups as phenyls or R₁–phenyl/R₂–indole/naphthalene in various stereo configurations. Spectral, functional and structural characterization of the inhibitory complexes showed that a one-atom head-group linker elongation, from pyridyl–ethyl to pyridyl–propyl, was beneficial and markedly improved K_s, IC₅₀ and thermostability of CYP3A4. In contrast, a two-atom linker extension led to a multi-fold decrease in the binding and inhibitory strength, possibly due to spatial and/or conformational constraints. The lead compound, 3h, was among the best inhibitors designed so far and overall, the strongest binder (K_s and IC₅₀ of 0.007 and 0.090 µM, respectively). 3h was the fourth structurally simpler inhibitor superior to ritonavir, which further demonstrates the power of our approach.