110kV变电站35kV高压系统边运行边改造实践

对宣钢供电系统110kV变电站35kV高压系统边运行边施工改造经验进行了分析探讨。指出选用优良的设备、制定周密的安全措施，能够确保施工、运行安全。     

Accumulation and Mixing of Oils in Jinghu Sag of Subei Basin： Constraints from Thermal Maturity Parameters

Oils in Jinghu sag are abundant with high content of polar compounds and have a low ratio of saturate to aromatic hydrocarbons and a high ratio of resin to asphaltene. The gross composition of oils in the Jinghu sag suggests typical immature to low mature characteristics. Some compounds with low thermal stability were identified. Light hydrocarbons, a carbon preference index, an odd even index, n-alkane and hopane maturity parameters show mature features and little differences in the maturity level among oils. Sterane isomerization parameters indicate an immature to low mature status of oil. Transfer of the sedimentary center during sedimentation has led to different thermal histories among subsags and thus generated oils with different maturities. On the basis of source analyses, four migration and accumulation patterns with different maturity can be classified. Combined with available information on mergers of source, reservoir and long distance oil lateral migration, mixing conditions were present in the Jinghu sag. Experimental results indicate that maturity variations are caused by mixtures of hydrocarbons with different maturity.     

Numerical Simulation of Independent Advance of Ore Breaking in the Non-pillar Sublevel Caving Method

The mechanism of stress generation and propagation by detonation loading in five separate independent advance of ore breaking patterns is discussed in the paper. An elastic numerical model was developed using AN- SYS/LS-DYNA 3D Nonlinear Dynamic Finite Element Software. In this package ANSYS is the preprocessor and LS-DYNA is the postprocessor. Numerical models in the paper to actual were l：10 and the element mesh was dissected in scanning mode utilizing the symmetry characteristics of the numerical model. Five different advance rates were studied. Parameters, such as the time required to maximum stress, the action time of the available stress, the maximum velocity of the nodes, the stress penetration time, the magnitude of the stress peak and the time duration for high stress were numerically simulated. The 2.2 m advance appeared optimum from an analysis of the simulation results. The results from numerical simulation have been validated by tests with physical models.     

新型梳形电缆防火墙的应用

通过新型梳形电缆防火墙的实施，有效地限制了电缆火灾范围，增强了电缆防火、隔火能力，并详细地介绍了梳形电缆防火墙的原理结构、安装使用和注意事项。     

用熵方程证明全不可逆循环揭示的Clausius方程式

利用不可逆循环图代替传统的半不可逆循环推导出Clausius积分式，并用熵方程证明之，得出可逆过程膨胀功大于不可逆过程膨胀功。     

关于约束方差控制器的评估问题的研究

本文研究当系统的性能指标表现为系统输入及输出的方差约束时一类随机控制器的评价问题，给出了系统反馈输入及输出的辨识算法，该算法可用来评价反馈控制器能否使反馈系统满足既定的方差约束，以便在对实际系统实施控制之前及时调整控制器，从而达到设计目的。     

三模式氡测量刻度装置的研制

为满足实验室对一般氡测量仪器的刻度需要,设计了能够实现在脉冲模式、恒定模式和连续模式三种模式下自动控制、自动监测的氡测量刻度装置,并对装置进行了稳定性和可靠性试验。试验结果表明,该装置可为氡及其子体的研究以及其测量仪器的标定提供一个可调节、具有稳定氡浓度的环境。     

韶钢热轧宽板厂工艺设备参数的优化

采用卷轧与中板轧制相结合的轧制工艺具有投资省、见效快等优点,对于资金不是很充裕需要采取滚动发展的中小型企业是一种可取之路.韶钢通过与国内外专家的技术交流、技术谈判及优化,在有限的场地上(长620m、宽120 m)布置一套先进、实用的3 450现代宽中厚板(卷)生产线,取得了较好的投资效益.     

垃圾焚烧发电厂烟气处理系统设计研究

文中结合垃圾焚烧发电厂烟气处理设计,介绍了干法烟气净化系统设计的主要技术要点及其效果,为垃圾焚烧发电厂烟气净化处理提供了设计的方向.