Effect of Heat Treatment on Luminescent Properties of White Organic Light Emitting Device

The white organic light emitting device (OLED) with single-structure using a polymer blend as the light emitting layer is fabricated. Heat treatment is used to control the ratio between the intensities of main electroluminescent spectral peaks. The electroluminescent spectrum of our device is quite similar to that of white inorganic LED produced by Nichia Corporation after being annealed, and its turn-on voltage can be decreased by 1V.     

关于决策支持系统的结构与进化

本文在总结作者开发决策支持系统的实践经验的基础上，从ＤＳＳ的结构分析入手，探讨了ＤＳＳ的进化问题，首先通过软件开发方式，程序设计风范，人工智能道路和系统科学发展等方面的深入剖析，指出了进化能力的强弱是ＤＳＳ成败的关键。其次展开了关于ＤＳＳ结构的研究，提出了ＤＳＳ的外延结构和内涵结构的新概念并进行了比较。随后讨论了ＤＳＳ的进化问题，分析了传统的第一代决策支持系统存在的缺陷，阐述了第二代和第三代决策支     

The Effect of the Charge Fluctuation of Dust Parti-cles on Ion-acoustic Wave Excited Through Ionization Instability

The effect of the charge fluctuation of dust particles on ion acoustic wave (IAW) excited through ionization instability was investigated. The hydrodynamic equations and linear time-dependent perturbation theory served as the starting point of theory, by which the dispersion relation and growth rate of the IAW were given. By comparing the results with the case of constant dust charges, it was found that the charge fluctuation of dust particles reduces the instability of the wave mode.     

Hydrogen Reduction and Microstructural Changes of ISF Sinter

The reduction rate and microstructural changes of imperial smelting furnace (ISF) sinter have been investigated by means of thermogravimetric analysis, X-ray difFraction (XRD), scanning electron microscope (SEM ), energy dispersive analysis of X-ray (EDAX) and optical microscope.It is demonstrated that the overall reaction rate of the reduction is influenced by temperature and hydrogen partial pressure in H2 /N2 gas mixtures. There are two distinct zones observed in the partially reduced sinter. The reduction of zincite proceeds predominantly in a narrow range between the two zones, while the reduction of tead oxide and silicate takes place throughout the sinter. The differences between zincite and lead oxide or silicate in reducibility are analysed by thermodynamlcs. The phase transformations and microstructural changes occurring during the reduction process are discussed     

目标机动规范模型研究

分析和总结了飞机各种机动动作的内在因素,提出了目标机动规范模型,研究了模型的数学描述方式、控制参量的相互约束关系及其组织形式,并通过模拟导弹对目标的攻击过程对模型进行了验证。     

挠性抗回旋PDC钻头的有限元分析

回旋是导致PDC钻头早期失效的主要原因，介绍了一种基于挠性钻头的构想设计的抗回旋PDC钻头，阐述了其结构和抗回旋原理。对挠性钻头的公、母接头进行了有限元应力分析，说明了模型建立、网格划分以及约束和载荷施加过程中所采用的方法和关键技术。有限元分析结果表明挠性钻头的强度满足要求。     

阻尼式限流器参数的设计选择

本文阐述阻尼式限流器参数设计选择和产品系列规划的依据原则，并结合实例说明实施步骤与方法，以有助于限流器的正确设计与选用。     

约束层阻尼夹芯板动态特性分析

本文给出了新的建立约束层阻尼薄板动力学模型的方法。粘弹性材料的本构关系随温度和频率变化,难以对粘弹结构进行动特性分析及控制研究,本文采用GHM方法描述弹性材料的本构关系,将粘弹性材料的动力特性描述与工程上最常用的有限元分析结合起来,建立了悬臂约束层阻尼板的动力学模型,计算了约束层阻尼夹芯悬臂板的模态参数,计算结果同其它方法相比,精度高且更接近于实验结果,同时与ANSYS5.5及NASTRAN70.7的计算结果基本一致,表明本文给出的方法是准确可靠的。     

体积-表面淬火中加热温度的自动控制

根据表面-体积淬火奥氏体规范的要求，分析了感应加热过程中温度控制的特点和方式，并介绍了采用红外线光导纤维测温和微机控温技术成功用于体积-表面淬火中透热温度的自动控制。     

正交曲线坐标下三维代数应力通量模型

针对弯曲及不规则明渠的水动力及物质输运特性，本文建立了曲线坐标系下的三维代数应力通量数学模型，对平面上弯曲及不规则复杂边界情形，采用Poisson方程进行正交曲线坐标变换，各向异性的湍流代数应力通量模型被引用于本文的模拟计算中，以体现复杂边界条件引起的水动力及物质输运特性的变化。通过180度强弯曲明渠水槽及贵溪电厂不规则边界河段物理模型试验两个实例计算表明，实测值与计算吻合良好，效果令人满意。