Global insight into microwave stoneware firing: Macro and microstructural changes

Industrial competition and environmental concerns lead to the exploration of alternative and energy-efficient technologies for ceramic materials processing. The main objective of this work was to present microwave heating as a viable option for stoneware processing. Stoneware functional properties are presented and discussed, with emphasis on impact strength, water absorption, porosity, and color. Microstructure analyses show that microwave- and gas-fired samples have higher densifications than electrically fired samples. A relevant finding for processing conditions is that microwave firing requires temperatures approximately 100°C lower than those required by conventional firing. Microwave-fired samples’ rupture energies are approximately twice (0.57 ± 0.06 (J)) those of the reference samples (0.26 ± 0.03 (J)), and their water absorptions are approximately one-half (1.5% at 1170°C and 0.8% at 1190°C) of those of the reference samples (2.0%), whereas the water absorption of electrically fired samples at 1180°C has been estimated to be 7.5%. Color analysis also evidences a shift to lower microwave firing temperatures, what is attributed to the enhanced transformations promoted by microwave heating when comparing with the transformations promoted by conventional (gas or electric) heating.     

Initial stages of tin electrodeposition from sulfate baths in the presence of gluconate

Tin electrodeposition in its initial stages in acid sulfate/gluconate baths was studied with varying tin and gluconate concentrations using potential-controlled electrochemical techniques. The deposit morphology was observed by scanning electron microscopy (SEM). A comparison with tin electrodeposition from acid sulfate baths in the absence of gluconate was also carried out. Use of a highly acidic bath leads to nonuniform deposits, even in the presence of gluconate; at pH 4 deposits are uniform, brilliant and suitable for finishing applications. Tin crystallites have a well defined morphology which depends on bath agitation conditions. In the absence of agitation, the crystallites have the same tetragonal shape as in a sulfate bath without gluconate.     

The role of the surface free energy in the selection of a suitable excipient in the course of a wet-granulation method

Pellets containing metronidazole were produced in a centrifugal granulator, with hydroxypropylcellulose (Klucel LF®) as binding agent, and corn starch, microcrystalline cellulose (Vivapur 101®) and lactose as excipients. The wettability of the pharmaceutical powders was assessed by means of contact angle measurements, and the dispersive and polar surface energies were determined. The spreading coefficients, the work of adhesion and the work of cohesion were calculated and correlated with the pellet properties (friability, bulk and tapped density, and porosity). The aim was to investigate the role of the surface free energy of one- and two-component powder compositions in pellet production. The interactions between the particles were found to be connected with the measured pellet parameters. It was concluded that, in the course of the growth of the pellets, the particle sizes of the pharmaceutical powders and the interactions between them are important. If the work of cohesion of the binder is lower than the work of cohesion of the substrate and the work of adhesion, then the optimal amount of the binding agent is that which coats the particles uniformly in minimal quantity and in continuous layer.     

Effect of MoS2 morphology on the HDS activity of hydrotreating catalysts

We have applied near-edge X-ray absorption fine structure (NEXAFS) to characterize the surface and bulk properties of Li_xNi_1–xO catalysts. In our experimental set-up, NEXAFS spectra of powder materials could be obtained by measuring the intensity of either electron-yield or fluorescence-yield. While the electron-yield method is sensitive only to the top few atomic layers, the fluorescence-yield method can detect species up to a few thousands angstroms deep into the bulk structure. The ability to distinguish surface and bulk compositions is demonstrated in studies of a number of Li_0.5Ni_0.5O samples, of which the surface compositions vary as a function of preparation procedures. In addition, NEXAFS investigations following the reaction of Li_xNi_1–xO with CH₄ have also been carried out and the results indicate that the initial surface reaction intermediates are Li₂CO₃.     

Land Use Effect on the CN Model Parameters in a Tropical Dry Environment

Dry tropical forests account for over 1,000,000 km², and there is still lack of knowledge on their hydrologic processes. The curve number (CN) hydrologic model developed by the Natural Resources Conservation Service (NRCS) is widely applied for runoff determination in various parts of the world, but not so in tropical semiarid regions. This study analyzes the impact of land use changes on the CN model in a tropical semiarid environment, in two catchments of native dry tropical forest and thinned dry tropical forest land use from 2009 to 2012. The CN model was calibrated and validated for the NRCS recommended initial abstraction ratio λ = 0.2, and for λ evaluated from rainfall and runoff data. A reliability analysis was performed using Monte Carlo simulation. Model goodness-of-fit was assessed with statistical criteria. A total of 42 and 40 rainfall-runoff events were analyzed for the native and thinned dry tropical forest, respectively. Characteristic λ values of 0.15 and 0.11 were determined for the two respective catchments. Although CN values were similar for both land uses, CN_λ=0.20 = 80 and CN_{median λ} = 77, the thinned catchment showed a higher CN model parameters variability. The CN model was more sensitive to variations of CN values than to those of λ. This study showed that no matter the vegetation management in a dry tropical forest environment, modeled runoff is not affected by λ, but rather affected by CN, which represents soil, landuse and management.     

Application of the classical levels of intelligence to structuring the control system in an automated distribution centre

Traditional management and control models can benefit from added levels of intelligence to increase their capability to adapt to the continuous changes in global markets. After reviewing the classical definition of intelligence and its levels, this paper provides a new approach to help increase the responsiveness of management and control to changes and disturbances in the manufacturing supply chain. The ancient concept of the “Tertium Quid” has inspired a three-level community of agents (MAS-TRIO) that is proposed to improve the coordination of all actors involved. The proposed model combines Multi-Agent Systems (MAS) with Radio-Frequency Identification (RFID) to make possible a certain level of Autonomous Intelligence in the decision-taking process. This paper analyses how these levels of intelligence can be applied to management and control, and the performance of the proposed model has been tested at low and mid-levels on an experimental platform representing the facilities of a distribution centre controlled by a network of programmable logic controllers (PLCs).     

In situ leaching method for determination of chloride in concrete pore water

In the in situ leaching (ISL) method, pore water ionic content is determined in small cavities drilled in mortar/concrete specimens. Prior investigations have demonstrated the ISL applicability to obtain pH and nitrite ion concentration in concrete/mortar pore water. The application of the method is extended here to determine pore water chloride ion concentration (and pH) within practical test times in mortars and concretes prepared in the laboratory and in concrete cores extracted from a bridge deck in deicing salt service. Spatial resolution for the determination of composition profiles is also illustrated. Modeling of the ISL process indicates that chloride binding accelerates the approach toward a terminal cavity concentration, reducing test duration to practical lengths for moderate permeability concretes. This acceleration can be attributed to maintaining a higher gradient of free chloride near the cavity wall due to the release, during leaching, of previously bound chloride. Consequently, there is a faster chloride buildup in the cavity water compared with the no-binding case. Experimental chloride and pH results obtained by the ISL test in mortar samples show good agreement with those from the pore water expression (PWE) method. Also, examples are presented of application of ISL data to obtain chloride binding isotherms, and pore water chloride to hydroxide ratio relevant to assessing conditions for corrosion of steel reinforcement. The ISL method presents a less costly and less disruptive alternative to PWE for pore water analysis. It is noted, however, that in a few instances ISL could not be implemented because of excessive absorption of cavity water by the surrounding medium.     

Enterotoxigenic <Emphasis Type="Italic">Escherichia coli</Emphasis> strains bind bovine milk gangliosides in a ceramide-dependent process

Diarrhea caused by enterotoxigenic Escherichia coli (ETEC) is the main infectious disease of newborn calves. The first step of infection involves bacterial attachment to the intestinal mucosa. This adhesion is mediated by fimbriae that recognize some glycoconjugates on the host cell surface, in particular, several gangliosides. Because milk also contains gangliosides, these have been suggested to serve as ligands for bacterial fimbriae and thus prevent the bacterial attachment to mucosa. The most relevant ETEC strains in calves, including those with K99 and F41 fimbriae, were assayed to determine whether they are able to bind gangliosides isolated from several stages of bovine lactation. Both GM3 and GD3, the main gangliosides of milk, were recognized by ETEC strains, although the different fimbriae showed diverse levels of affinity. Unexpectedly, the adhesion to colostral gangliosides was considerably weaker than that to gangliosides from the other stages of lactation. Because the carbohydrate moiety did not change and because differences in the percentages of unsaturated FA and sphingosine between colostrum and other stages were observed, we conclude that the differences in adhesion could be due to a different composition of the ganglioside caramide.     

Event-driven,pattern-based methodology for cost-effective development of standardized personal health devices

Experiences applying standards in personal health devices (PHDs) show an inherent trade-off between interoperability and costs (in terms of processing load and development time). Therefore, reducing hardware and software costs as well as time-to-market is crucial for standards adoption. The ISO/IEEE11073 PHD family of standards (also referred to as X73PHD) provides interoperable communication between PHDs and aggregators. Nevertheless, the responsibility of achieving inexpensive implementations of X73PHD in limited resource microcontrollers falls directly on the developer. Hence, the authors previously presented a methodology based on patterns to implement X73-compliant PHDs into devices with low-voltage low-power constraints. That version was based on multitasking, which required additional features and resources. This paper therefore presents an event-driven evolution of the patterns-based methodology for cost-effective development of standardized PHDs. The results of comparing between the two versions showed that the mean values of decrease in memory consumption and cycles of latency are 11.59% and 45.95%, respectively. In addition, several enhancements in terms of cost-effectiveness and development time can be derived from the new version of the methodology. Therefore, the new approach could help in producing cost-effective X73-compliant PHDs, which in turn could foster the adoption of standards.