Constitutive modelling and numerical simulation of multivariant phase transformation in superelastic shape‐memory alloys

This work concerns the micromechanical constitutive modelling, algorithmic implementation and numerical simulation of polycrystalline superelastic alloys under multiaxial loading. The model is formulated in finite deformations and incorporates the effect of texture. The numerical implementation is based on the constrained minimization of the Helmholtz free energy with dissipation. Simulations are conducted for thin tubes of Nitinol under tension–torsion, as well as for a simplified model of a biomedical stent. Copyright © 2004 John Wiley & Sons, Ltd.     

Highly ordered microstructures of poly(styrene-b-isoprene) block copolymers induced by solution meniscus

Microstructures of hundreds of micron thick poly(styrene-block-isoprene) copolymer films solution-cast in a cylindrical tube with the solvent evaporation controlled were investigated by transmission electron microscope (TEM), small angle X-ray scattering (SAXS) and optical microscope (OM). In a block copolymer with cylindrical polyisoprene microdomains, the orientation of the cylinders was varied along radial direction of the cylindrical tube. Highly aligned hexagonal arrays of in-plane polyisoprene cylinders were formed with their cylindrical axis parallel to the circumference of the tube in the regimes close to the wall edge. In contrast randomly ordered microdomains were observed at the center of the tube. We have also found that the orientation depends on the solvent evaporation rate and an intermediate rate (∼2.3 nL/s) provides the best orientation. In the case of a block copolymer with a bicontinuous double gyroid structure, we obtained a globally ordered microstructure where [111] crystallographic direction was parallel to the circumference of the tube. For both block copolymers, the area of highly ordered arrays of nanoscopic domains is over 1 mm². Development of the orientation was explained by coupling two orthogonal fields: (1) The flow of a solution induced by strong capillary force at a meniscus between the cylindrical tube wall and the block copolymer solution and (2) the solvent evaporation.     

Preparation and characterization of cuprous iodide nanoparticles

A new technique for the preparation of CuI nanoparticles from CuSO₄ and KI ethanol solutions has been developed. Preparation conditions were optimized through a series of experiments. Under these conditions, the yield of CuI reached 95.39%. The product was characterized and the reaction kinetics was studied. The results show that the product takes a roughly spherical shape with an average particle size of less then 50 nm. The activation energy of the formation of CuI is found to be E _a = 0.58 × 10² kJ/mol, and the preexponential factor in the Arrhenius equation is k ₀ = 7.43 × 10¹⁶ mol/(l s). The text was submitted by the authors in English.     

Defining Yield from Bender Element Measurements in Triaxial Stress Probe Experiments

This paper describes the elastic response of a block sample of compressible Chicago glacial clay under a variety of stresses and its relationship with the deformation characteristics at relatively large strains. The elastic shear stiffness was obtained from bender element tests during consolidation and shearing in drained triaxial stress probe tests. An empirical correlation was established based on the elastic shear stiffness in a preyield condition. By comparing the empirical correlation with the measured elastic shear stiffness in the stress region during probing, the changes of elastic shear stiffness were investigated. The departure of elastic shear stiffness from values computed by the empirical relation based on K0 loading directly relates to the yielding characteristics of the clay. The large-scale change of soil structure at yielding alters the well-established relationship between the elastic shear stiffness and stresses in the preyield condition. The mechanical yielding response of clays can be detected based on the systematic analysis of the elastic shear wave velocities.     

Variation de la plombemie en fonction de la contamination par le plomb de l'eau livree a la consommation: Variation of the blood lead level as a result of lead contamination of the subjects drinking water

The combination of the chemical aggressivity of water and lead piping, as is well known, can cause severe cases of lead poisoning in those who consume such water. After a great number of observations and epidemiological studies which have strongly incriminated this metal in a wide range of pathologic conditions, other materials have been gradually substituted for lead; however, the problem remains.In compliance with a European Directive to survey the risk of lead poisoning (Council Directive, 1977), a random sample of 321 residents was selected from the Vosgian Mountains of France. This region is noted for its high incidence of cases of lead poisoning: 150 reported during 8 months in 1983 (Barbier et al., 1983).During the course of a health evaluation, a blood sample was taken from each subject for lead analysis. At the same time, a sample of tap-water (after running for 5 s) was taken from each subject home. Both lead analyses (blood and water) were performed by electrothermal atomization-atomic absorption spectrophotometry. Because of the log-normality of the distributions of the blood lead levels and the concentrations of lead in the drinking water, a logarithmic transformation was performed so that the results are expressed as the geometric mean, which for the amount of lead in the drinking water of our sample was found to be 0.16 mg l^?1.Among the subjects of this study, 28% are served by water containing more than 0.10 mg l^?1 of lead (the standard for France) and 48% by water containing more than 0.05 mg l^?1 (the European and WHO standard). In concurrence with numerous authors, our study indicates that, among our subjects, the blood lead level is much higher in men than in women (geometric means 22.9 and 15.0 μg dl^?1 respectively); this difference is highly significant (t-test:P < 0.001). Table 1 summarizes the results, by sex, obtained in this region compared with those from a study (Huel, 1982) concerning an urban French population whose geometric mean blood lead levels were 15.9 μg dl^?1 for men and 11.4 μg dl^?1 for women. The irrespective of sex, is highly significant (P < 0.001). Table 2 shows the significance of the relation between these subjects, high blood lead levels and the concentration of lead in their drinking water, while Fig. 1 shows that for contamination levels up to 0.02 mg l^?1 of lead in water, the blood lead level remains relatively stable, while above this apparent “threshold” value, the blood lead level begins to increase finally reaching quite high values in response to high contamination levels, suggesting a direct translation of increases in the water above the 0.02 mg l^?1 level to increases in the blood.     

A 0.25-/spl mu/m CMOS quad-band GSM RF transceiver using an efficient LO frequency plan

This paper describes a single-chip CMOS quad-band (850/900/1800/1900 MHz) RF transceiver for GSM/GPRS applications. It is the most important design issue to maximize resource sharing and reuse in designing the multiband transceivers. In particular, reducing the number of voltage-controlled oscillators (VCOs) required for local oscillator (LO) frequency generation is very important because the VCO and phase-locked loop (PLL) circuits occupy a relatively large area. We propose a quad-band GSM transceiver architecture that employs a direct conversion receiver and an offset PLL transmitter, which requires only one VCO/PLL to generate LO signals by using an efficient LO frequency plan. In the receive path, four separate LNAs are used for each band, and two down-conversion mixers are used, one for the low bands (850/900 MHz) and the other for the high bands (1800/1900 MHz). A receiver baseband circuit is shared for all four bands because all of their channel spaces are the same. In the transmit path, most of the building blocks of the offset PLL, including a TX VCO and IF filters, are integrated. The quad-band GSM transceiver that was implemented in 0.25-/spl mu/m CMOS technology has a size of 3.3/spl times/3.2 mm/sup 2/, including its pad area. From the experimental results, we found that the receiver provides a maximum noise figure of 2.9 dB and a minimum IIP3 of -13.2dBm for the EGSM 900 band. The transmitter shows an rms phase error of 1.4/spl deg/ and meets the GSM spectral mask specification. The prototype chip consumes 56 and 58 mA at 2.8 V in the RX and TX modes, respectively.     

Effect of oxygen vacancies on transformation of zirconia at low temperatures

The effect of oxygen vacancy on the stability of phase structures and phase transformation of zirconia at low temperatures was studied using an electrochemical technique. It is suggested that the decrease of oxygen vacancies decreases the stability of metastable tetragonal zirconia and promotes its transformation to the monoclinic phase. This revised version was published online in November 2006 with corrections to the Cover Date.     

High affinity presentation of an autoantigenic peptide in type I diabetes by an HLA class II protein encoded in a haplotype protecting from disease

Tissue composition and the distribution of body mass are described for four genera of East African Bovidae (Madoqua, Gazella, Damaliscus, Hippotragus) with supporting data from four others (Neotragus, Oryx, Tragelaphus, Connochaetes). These species are high in muscle mass, an adaptation convergent with other high-speed terrestrial cursors, bounders, and saltators. The segments below the elbow/cubitus and knee/stifle/genu joints in small bovids are both lighter in percent of total body mass (8.6% TBM) and less heavily muscled (10-15% of total limb musculature) than those segments in macaques (13.6% TBM, 20-25% of the limb musculature). Bovid species differ from one another in the regional distribution of muscle mass. Madoqua kirkii (4-5 kg) concentrates muscle in the lumbar extensors and hindlimbs; large species such as Damaliscus doreas (50-60 kg) and Hippotragus niger (160-220 kg) distribute it more evenly between the lumbar and cervical regions and between the hindlimbs and forelimbs. Gazella dorcas (10-20 kg) is quantitatively intermediate in those characteristics. The redistribution of muscle mass with increasing size correlates with the loss of axial bending of the vertebral column: in small, hindlimb dominant, 'dorsomobile' species such as Madoqua sagittal mobility increases stride length through 'extended' suspension; in large 'dorsostable' species such as Damaliscus and Hippotragus the vertebral column resists bending, consequently abbreviating or omitting this non-contact phase of the gait cycle. Locomotor adaptation as it is reflected in size, shape, and musculoskeletal structure is the key to habitat choice, dietary specialization, social structure, and male agonistic behavior and, therefore, central to the fabric of behavioral ecology.