Robust Space Time Receiver for CDMA-based Antenna Arrays

In this paper, we propose a new robust code division multiple access (CDMA) receiver of which weight vector is obtained by projecting the effective spatio-temporal signature waveform onto the signal subspace of the data covariance matrix. We verified our proposed algorithm by the field measured data obtained with a custom-built wideband CDMA test-bed. It will be shown that the proposed algorithm is robust to the signal mismatch.     

降低精炼钢中氢氧含量的探索

主要介绍通过优化炼钢生产工艺,使产品满足新的技术要求:S≤0.010％,P≤0.015％.[H]≤0.0002％,[O]≤0.0045％,[N]≤0.0055％。     

鱼雷罐喷粉预处理过程水模研究

在鱼罐喷粉预处理水模实验数据的基础上，进一步利用线性回归确定各工艺操作参数对喷吹基本参数（均混时间、粉剂穿透比和粉剂停留时间）的影响，得出各传输动力学基本参数的函数关系式。     

ARTIFICIAL INTELLIGENCE CONTROL OF FOOD FREEZER USING ROTATING DISK AIR DISTRIBUTOR FOR UNIFORM FREEZING

A rotating disk air distribution (RDAD) system consisting of a rotating disk with an air supply hole was fabricated to solve the nonuniform freezing problem of a freezer that supplies air through a duct at a fixed location. The RDAD system was installed in a freezer to supply freezing air in various directions by controlling the position of the air supply hole. An equation estimating air velocity in the freezer was developed based on heat balance between a brass block thermocouple (BBT) probe and ambient air stream. The equation was applied to the analysis of airflow patterns developed through the RDAD and the fixed duct system. For control of the RDAD system, a fuzzy matrix was constructed with the measured nodal temperature at 3D locations in the freezer and used to search for the optimum direction of air supply. Uniform cooling was accomplished with the RDAD system using fuzzy and expert algorithms leading to temperature deviation σ=0.666, compared with 0.289 of the fixed air supply system. Cooling rate of model food (BBT) was 1.75 times faster than that of the fixed system.     

Synthesis and characterization of poly(siloxane-urethane)s

A series of polyurethane block copolymers based on hydroxy-terminated polydimethylsiloxane and poly(propylene glycol) soft segments of molecular weights 1818 and 2000, respectively, were synthesized. The hard segments consisted of 4,4′-diphenylnethane diisocyanate and 1,4-butanediol as the chain extender. Samples with different molar ratios were prepared. We tried to synthesize polydimethylsiloxane-based polyurethanes (PDMS-PU) containing a hard block as major fraction and a soft block as minor fraction for preparing toughened rigid systems. After a study of the pure polydimethylsiloxane-based polyurethane and poly(propylene glycol)-based polyurethane (PPG-PU), (mixed polyol)-based block copolymers and blends of PDMS-PU and PPG-PU were synthesized, and characterized by means of differential scanning calorimetry, tensile testing and scanning electron microscopy. In (mixed polyol)-based copolymers and lower hard-segment content blends, macro-phase separation occurred, but blends with higher hard-segment contents showed significant reduction in amounts of phase separation.     

“镍”催化酰氯和有机锡试剂交叉偶联反应的研究

镍络合物催化酰氯与有机锡试剂交叉偶联合成有机酮的反应,其反应选择性强,反应彻底,转化率高,工艺简单。在有机锡过量的情况下,对不同催化剂的催化活性和包括投料比,反应温度,反应时间,反应溶剂等反应条件进行了考察。     

The effects of plasma etching induced gate oxide degradation onMOSFET's 1/f noise

The effects of the plasma etching process induced gate oxide damages on device's low frequency noise behavior are investigated on MOSFET's fabricated with different field plate perimeter to gate area ratio antennas. Abnormal 1/f noise spectrum with a shoulder centered in the frequency range of 100 and to 1 kHz was frequently observed in small geometry devices, and it is attributable to a nonuniform distribution of oxide traps induced by plasma etching process     

能量"三环节"理论在原油蒸馏装置扩能改造中的应用

中国石化扬子石化股份有限公司炼油厂在第一套常减压蒸馏装置扩能改造中，使用了多项节能技术以实现能量的优化利用。本文以标定数据为基础，运用能量“三环节”理论对该装置的用能状况进行了计算和分析，从能量利用角度对装置的扩能改造效果进行了评价，并为装置的进一步优化能量利用提出了相应措施。     

鱼雷罐喷粉预处理优化研究

在已经得到的描述鱼雷罐喷粉处理基本参数具体表达式的基础上，运用多目标非线性优化方法，对工艺操作参数进行优化。