Das Problem der verantworteten Therapieentscheidung in der Neonatologie

Definition of the problem: Physicians and nurses who work in neonatology—as in intensive care at all—are often forced to decide whether to stop or to continue with the treatment of a severely ill patient. The literature provides several decision making instruments, which are meant to help and to rationalize such decisions. Method and conclusion: Two of these instruments (“Schema zur ethischen Urteilsbildung nach dem Muster der aristotelischen Ethik”, Honnefelder 1994; “Nimwegener Methode für ethische Fallbesprechung”, Gordijn 1998) were tested by retrospectively examining two cases of our NICU. Results of our study show that the use of a decision making instrument is basically helpful. But the above mentioned instruments showed also shortcomings when used in the framework of neonatology. Therefore we developed the “Kölner Arbeitsbogen zur ethischen Entscheidungsfindung in der Neonatologie”, which is adapted to the specific needs of neonatology.     

TEM Investigations of Fine Niobium Precipitates in HSLA Steel

Commercially produced 0.03 % C, 0.08 % Nb, 0.01 % Ti high strength low alloyed (HSLA) steel in the form of 20 mm thick plates was investigated. The steel was thermomechanically processed and the mechanical properties of the steel were evaluated by tensile testing. Using analytical and high resolution transmission electron microscopy the distribution, morphology, composition, crystal structure and particle size of niobium and titanium carbonitrides were observed and identified in these steels. The distribution of the precipitates was found to be nearly random, with occasional occurrence of precipitation free zones. Complex agglomerates with a cubic TiN seed crystal overgrown by a cubic NbC particle were the most commonly observed precipitates. Further TEM analysis in the accelerated cooled and tempered specimens in 1/4 plate thickness did not reveal any evidence that additional precipitation in the ferrite occurred. Precipitation in ferrite was only detected after subsequent cold deformation and tempering of the same samples. By a combination of EFTEM, STEM, HRTEM in addition to EDX spectroscopy, a large population of strain induced NbC precipitates with fcc crystal structure ranging in size down to 2 nm were identified in the ferrite matrix.     

Review of ECSC research work in ironmaking

The Treaty of the European Coal and Steel Community (ECSC), which expired in 2002, states in its Article 55 to promote technical and economic research with respect to the production and growing application of coal and steel. The results of funded research projects shall be made available to all representatives and partners concerned. For the European steel industry Article 55 was the basis for building up a steel research programme covering topics from raw materials to steel application and instigated a European network of researchers from the steel industry, research institutes and universities. On the basis of these research and development activities carried out by the ECSC steel research, the iron and steel industry has shown important advances in technology and environmental compatibility. Furthermore, the ECSC steel research has contributed to nearly all important technological developments. The main objective of the ECSC steel Research and Technology Development (RTD) programme was to sustain and develop the Community steel industry's competitiveness. The following report describes fundamental developments and activities within the framework of ECSC research with particular respect to hot metal production in the last 15 years.     

Facile one-pot synthesis of novel dicyanoanilines fused to tetrahydro-4H-thiopyran-4-one ring via Et3N/H2O catalyzed pseudo four-component reaction

A facile procedure is developed for one-pot synthesis of a new group of dicyanoanilines. Tetrahydro-4H-thiopyran-4-one, 1, undergoes a pseudo four-component reaction with various aldehydes bearing different groups and two equivalents of malononitrile in aqueous media in the presence of triethylamine (Et₃N). As a result, novel thiopyran-fused dicyanoanilines 4 are formed efficiently in the reaction mixtures in 90–97% yield within 9–12?h mixing at 40°C. Due to the polarity of the medium, products precipitate in the mixture spontaneously allowing for easy purification by recrystallization avoiding cumbersome chromatographic separations. Characterization of the products was performed by spectroscopic methods and, in one case, was further supported by X-ray crystallographic experiments.     

The Internal Pressure Test in Experiment and Simulation—Influence of the Wall Thickness Variation and the Change of the Packaging Behavior after the Impact of Standard Liquids

The effect of the wall thickness variation of blow‐moulded bodies made of high‐density polyethylene on an internal pressure test after prestoring the packaging with standard liquids was evaluated in experiments and simulations. The objects of the investigation were jerrycans used for the transportation and storage of dangerous goods. The wall thickness was determined using two alternative methods to the magnetostatic measurement. These alternative methods are used for research purpose to get a volumetric model of the jerrycan wall as a geometric model for the simulation. The comparison of the experiments and the simulations of the internal pressure test were performed using the digital image correlation method. The integral strain and deformation of the whole jerrycan was detected by measuring the total mass of the jerrycan being filled with water during the internal pressure test. This is a suitable alternative to the optical measurements of local deformation by the digital image correlation method. Prestorage at 40 °C without the influence of chemicals strengthens the jerrycan, whereas the swelling effect of butyl acetate and hydrocarbon mixture softens the jerrycan. The comparison with the experiment is necessary to verify the accuracy of the simulation. It shows that the deformation can be simulated more precisely by using the actual measured geometry. The weakening of the high‐density polyethylene caused by a hydrocarbon mixture can be simulated using the Arrhenius equation. The aim of the simulation was to discover whether it is possible to use specimens to predict the behaviour of a packaging both after the influence of standard liquids. Copyright © 2012 John Wiley & Sons, Ltd.     

A cross‐cultural comparison of colour emotion for two‐colour combinations

Psychophysical experiments were conducted in the UK, Taiwan, France, Germany, Spain, Sweden, Argentina, and Iran to assess colour emotion for two‐colour combinations using semantic scales warm/cool, heavy/light, active/passive, and like/dislike. A total of 223 observers participated, each presented with 190 colour pairs as the stimuli, shown individually on a cathode ray tube display. The results show consistent responses across cultures only for warm/cool, heavy/light, and active/passive. The like/dislike scale, however, showed some differences between the observer groups, in particular between the Argentinian responses and those obtained from the other observers. Factor analysis reveals that the Argentinian observers preferred passive colour pairs to active ones more than the other observers. In addition to the cultural difference in like/dislike, the experimental results show some effects of gender, professional background (design vs. nondesign), and age. Female observers were found to prefer colour pairs with high‐lightness or low‐chroma values more than their male counterparts. Observers with a design background liked low‐chroma colour pairs or those containing colours of similar hue more than nondesign observers. Older observers liked colour pairs with high‐lightness or high‐chroma values more than young observers did. Based on the findings, a two‐level theory of colour emotion is proposed, in which warm/cool, heavy/light, and active/passive are identified as the reactive‐level responses and like/dislike the reflective‐level response. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2012     

Problems and Benefits of Requirements Gathering With Focus Groups: A Case Study

Focus group interviews are considered as a rather weak, nonquantitative method of assessing user needs, ideas, and reactions in an early stage of the interface design process (Nielsen, 1993). Given this fact, it is relevant to reflect the practical use of focus groups step by step to determine their real strengths and limitations. In this article, we share our experience of planning, running, and analyzing focus groups within the design process of a home automation system. We describe the pre- and postwork in detail so that the pros and cons of gathering requirements with focus groups become apparent.