Role of Direct Reduced Iron Fines in Nitrogen Removal from Electric Arc Furnace Steel

Electric arc furnace steel contains about 70‐120 ppm nitrogen. There is no suitable method for nitrogen removal from electric arc furnace steel up to the level desired for good quality bars and flat rolled products (30 ppm max). The existing process based on vacuum degassing can remove only up to 20% of nitrogen in steel. In the present study DRI fines have been injected into a steel bath which can drift out nitrogen in steel through production of fine CO bubbles in‐situ on reaction with residual FeO in DRI fines and C in bath. For high and medium carbon steel, nitrogen got reduced to 30 ppm and 60 ppm respectively where initial nitrogen was 150 – 200 ppm in steel. Nitrogen removal also depends upon bath depth and addition level of DRI.     

Development and characterization of magnesium composites containing nano-sized silicon carbide and carbon nanotubes as hybrid reinforcements

Magnesium based hybrid composites containing nano-sized silicon carbide and carbon nanotubes reinforcements with minimal porosity were successfully fabricated using powder metallurgy technique with microwave sintering and hot extrusion. It was found that the addition of nano-sized silicon carbide and carbon nanotubes reinforcements lowered the coefficient of thermal expansion of magnesium. Moreover, increasing presence of silicon carbide particles led to a progressive reduction in coefficient of thermal expansion for a constant overall amount of reinforcements indicating that carbon nanotubes lowered the coefficient of thermal expansion to a lesser extent when compared to silicon carbide. Micro-hardness, 0.2% YS and UTS (except for Mg+1%CNT) showed improvement, while failure strain decreased when nano-sized silicon carbide and carbon nanotubes were added to magnesium. The failure mode of magnesium and magnesium composites was predominantly brittle exhibiting the presence of cleavage steps.     

A differential-difference equations model of a dynamic aquatic ecosystem†

This paper presents a differential-difference equations model of a dynamic aquatic ecosystem. This paper departs from other models by considering : (a) specific phyla of phytoplankton, zooplankton and nekton ; (b) their prey—predation relationships ; (c) both allelochemic and antotoxic effects of algae upon zooplankton and other algae ; (d) inter-phyla competition for nutrients. Other factors included are : limiting effects of phosphates, nitrates, silicates, photoperiod, turbidity, temperature, and time lag, as they affect growth and reproduction of the biota. The model uses the western basin of Lake Erie as a test example, but any shallow basin that does not experience thermoclines could be used.     

Stochastic analysis of a priority unit standby system with repair machine failure

This paper deals with the analysis of reliability characteristics of a two-unit (priority ‘p’ and ordinary V) cold standby system model under a very practicable assumption that the repair machine may also fail during the process of system effectiveness. The analysis is obtained by using a regenerative point technique.     

Control of robotic manipulators—a neural network approach

A neural-network-based scheme is used for the control of a robotic manipulator. The main idea is that, by using a neural network to learn the characteristics of the robot system (or specifically its inverse dynamics), accurate trajectory following and good performance results are obtained. However, the traditional back-propagation algorithm commonly used for control and identification of nonlinear systems suffers from a slow rate of convergence. We investigate the effect of adusting the slope of the activation function (the node nonlinearity) on the performance of a back-propagation algorithm. It is shown that learning speed is increased significantly by making the slope of non-linearity adaptive. The results demonstrate that the proposed method gives better error minimization and faster convergence. The suggested method is applied to a two-link robotic manipulator. The resulting controller is sufficiently robust with respect to the changing conditions.     

Cure characteristics,swelling behaviors,and mechanical properties of carbon black filler reinforced EPDM/NBR blend system

The effect of carbon black fillers viz. semireinforcing furnace (SRF), high abrasion furnace (HAF) and intermediate super abrasion furnace (ISAF) carbon blacks on the cure, swelling and mechanical properties of 70/30 EPDM/NBR blend have been investigated. The maximum torque values have been found to be increased with increase in filler loading. Filledsystems have been found to exhibit a reduced solvent uptake tendency compared to the unfilled sample. Blends loaded with ISAF exhibited the lowest toluene uptake among the carbon black filled systems due to the better filler reinforcement. A more uniform morphology has been observed for ISAF‐filled samples compared to the other filler loaded systems. The improvement in the mechanical properties has been observed to be the highest for ISAF‐filled samples followed by HAF and SRF filled systems. This has been attributed to the smaller particle size of ISAF black. The experimental results of mechanical testing have been compared with various theoretical models. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of K-doped p-type ZnO nanorods along (100) for ferroelectric and dielectric applications

Urchin-like p-type ZnO nanorods were grown along preferred (100) direction by low temperature solution technique and subjected to morphological, structural, Hall conductivity, dielectric and ferroelectric characterization. Hall voltage, bulk carrier density (hole) and mobility were found to be 0.058 V, 2.36 × 10¹⁹ cm⁻³ and 0.025 cm²/V s, respectively. In the temperature variation of the dielectric constant a phase transition at 343 K was observed at various frequencies. The piezoelectric charge coefficient (d₃₃) was found to be 1.60 pC/N. In the ferroelectric hysteresis loop studies, ZnO exhibited remnant polarization and coercive field at 0.083 µC/cm² and 3.86 kV/cm, respectively.     

Amalgamation and application of nano chitosan cross‐linked with fish scales based activated carbon as an adsorbent for the removal of reactive dye (RB9)

The extensive discomfort in the expulsion of toxic pollutants even at mild concentrations has demanded the need for prompt methods for the evacuation of dyes and heavy metals. The effective method for depuration of dye from the effluent is by sorption. Chitosan is a bio‐polymer which is gaining an increasing interest as one of the sorbents. It was obtained from the crab shells by undergoing several chemical processes and used as an adsorbent for dye, metal removal and also for pharmaceutical purposes. Cross linking it with other co polymers will increase the capacity of adsorption to a maximum level. Fish scales are considered to be a major waste in the food industry and since it takes a long time for decomposing it is considered to be one of the pollutants. Hence it is utilised by converting it into activated carbon by preliminary treatment and into a muffle furnace. The obtained activated carbon is combined with chitosan by using a cross linker and utilised for adsorption mechanism. To analyse the effect of chitosan cross linked with activated carbon obtained from fish scales in adsorption of dye Reactive Blue 9 (RB9) to evaluate the adsorption studies, kinetics, mass transfer studies, thermodynamics of the bio adsorbent.Inspec keywords: dyes, wastewater treatment, effluents, mass transfer, activated carbon, adsorption, polymer blends, water pollution control, thermodynamics, reaction kinetics, furnaces, recycling, industrial waste, waste recovery, food processing industry, pharmaceutical industry, renewable materials, nanoparticles, toxicologyOther keywords: fish scales, activated carbon, reactive dye removal, toxic pollutants, heavy metals, bio‐polymer, nanochitosan, bio adsorbent, amalgamation, RB9 dye, industrial effluent, crab shells, adsorption method, pharmaceutical purposes, copolymers, food industry waste, waste recovery, recycling process, muffle furnace, reaction kinetics, mass transfer, thermodynamic analysis, ReactiveBlue 9, wastewater treatment, water pollution control, C