臭氧氧化法除地表水有机物试验研究

本文阐述臭氧化法除地表水有机物的重要意义，实验结果表明：臭氧氧化有机物的总氧化速率受活化控制，影响氧化率的最高显著因素是温度，其次是ｐＨ，接触时间等，臭氧很容易氧化腐植酸，在３０℃，ｐＨ９．０～１０．０，７ｍｉｎ内，ＣＯＤ去除率可达６０％以上，对邯郸热电厂生产处理也取得良好效果，３５℃，ｐＨ７．４～７．６，１０ｍｉｎ内，ＣＯＤ去除率可达６７％，可望将臭氧化水处理工艺应用于电厂水处理。     

高聚合度PVC／TPU共混物的制备与研究

本文研究了采用高聚合度聚氯乙烯(PVC)和热塑性聚氨酯(TPU)为主体材料制备高聚合度PVC/TPU共混物的过程,讨论了高聚合度PVC/TPU并用比、填料、增塑剂、共混工艺等因素对高聚合度PVC/TPU共混物性能的影响。     

高寿命弥散型透气砖的研制及应用

采用电熔Ａｌ２Ｏ３添加适量氧化铬和复合结合剂，试制出具有较好的抗周期性热冲击，抗侵蚀渗透和固结作用的高寿命弥散型透气砖。该砖透气性能理想，工作安全、可靠，实现了透气砖寿命与包龄同步。     

岩盐溶解速率的研究

在岩盐溶解速率及其影响因素的实验研究基础上,建立了岩盐溶解速率的计算公式。研究的结果可为岩盐开采和其他水溶法矿物开采提供参考。     

Kinetic and molecular weight control for methyl methacrylate semibatch polymerization. II. Open control

The gel effect will bring a violent increase of conversion for methyl methacrylate (MMA) polymerization in a short time. It will be very dangerous for the reactor, as it causes an increase of molecular weight and broadens the molecular weight distribution. To unify the kinetics, molecular weight, and its distribution, on the basis of the mathematical models for semibatch polymerization of MMA, three controlled objectives that are the heat load distribution index, the change in molecular weight, and molecular weight distribution index are presented. Three materials (monomer, solvent, and chain transfer agent) and their flow rate and feeding mode are analyzed for the open control of kinetics, molecular weight, and its distribution. The optimum flow rate and mode are obtained. The heat load distribution index and molecular weight distribution index are even less than 2.0 and 2.2, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4399–4405, 2006     

Cure kinetics of T700/BMI prepreg used for advanced thermoset composite

A new isothermally based, cure kinetic model for the prepreg was presented using an industrially supplied prepreg rather than pure resin. The matrix resin was bismaleimide (BMI) resins, and the reinforcement was carbon fiber T700–12S. The BMI prepreg was measured from 170 to 220°C by isothermal DSC. The isothermal cure reaction heat increases with the increment of cure temperature. The DSC data were analyzed by the proposed nth‐order reaction model. An increase in reaction rate was observed at higher temperature in both neat and prepreg. After reaching the peak value, the reaction rate dropped off faster in prepreg, resulting in a lower average value of the ultimate heat of reaction. It was suggested the presence of carbon fiber had an effect on the cure kinetics as a heat sink. The carbon fibers imposed restrictions on the molecular mobility of the reactive species and did not change the cure mechanism. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2238–2241, 2005     

D级压力容器制造许可证鉴定评审中企业存在问题综述

阐述了在D级压力容器制造许可证取换证鉴定评审过程中,取换证制造企业存在的较为普遍的问题。     

P2O5含量对Al2O3-SiO2-P2O5系统玻璃结构和析晶性能的影响

采用高温熔融冷淬法制备Al2O3-SiO2-P2O(5ASP)系统玻璃,用原位晶化法获得了磷酸盐微晶玻璃;用IR、DSC、XRD、SEM等测试方法表征了玻璃结构及析晶性能,讨论了P2O5含量对ASP玻璃结构和析晶性能的影响。结果表明:P2O5含量在35～50%能形成稳定的ASP玻璃。在磷含量较低时,玻璃结构中的P5 主要以不含P=O双键的[PO4]四面体形式存在,P2O5含量较高时,结构中的P-O-键削弱,P=O双键加强,P5 部分以含P=O双键的[PO4]四面体形式存在。随着P2O5含量的增加,玻璃稳定性变差,析晶趋势增强;晶化后的玻璃以AlPO4为主晶相,同时含有少量的Al(PO)3晶相,当晶化温度由650℃升高到800℃时,晶相含量增加并出现YPO4晶相。     

Effect of montmorillonite on properties of styrene–butadiene–styrene copolymer modified bitumen

Clay/styrene–butadiene–styrene (SBS) modified bitumen composites were prepared by melt blending with different contents of sodium montmorillonite (Na‐MMT) and organophilic montmorillonite (OMMT). The structures of clay/SBS modified bitumen composites were characterized by XRD. The XRD results showed that Na‐MMT/SBS modified bitumen composites may form an intercalated structure, whereas the OMMT/SBS modified bitumen composites may form an exfoliated structure. Effects of MMT on physical properties, dynamic rheological behaviors, and aging properties of SBS modified bitumen were investigated. The addition of Na‐MMT and OMMT increases both the softening point and viscosity of SBS modified bitumens and the clay/SBS modified bitumens exhibited higher complex modulus, lower phase angle. The high‐temperature storage stability can also be improved by clay with a proper amount added. Furthermore, clay/SBS modified bitumen composites showed better resistance to aging than SBS modified bitumen, which was ascribed to barrier of the intercalated or exfoliated structure to oxygen, reducing efficiently the oxidation of bitumen, and the degradation of SBS. POLYM. ENG. SCI., 47:1289–1295, 2007. © 2007 Society of Plastics Engineers     

ZnO-B2O3-P2O5系封接玻璃的研究

采用熔融法制备了ZnO-B2O3-PO5 系无铅磷酸盐封接玻璃，研究了组成对玻璃结构、特征温度、热膨胀和化学稳定性的影响。结果表明：B2O3和P2O5为玻璃网络形成体，ZnO含量较低时可以参与到玻璃网络结构中，提高玻璃的稳定性；玻璃转变点Tg、熔制温度Tm、封接温度Ts、软化点Td都随P2O5／B2O3减小而增加；B2O3／ZnO是影响玻璃熔制温度的主要因素；ZnO含量对玻璃密度和热膨胀系数影响较大。ZnO-B2O3-PO5 系玻璃在中性环境下的化学稳定性较好。。