单片机在管道强制输球清蜡装置中的应用

用AT89C2051单片机作控制核心，接口部分采用少量集成电路，使投球机除具有手动投球功能外，又能依据管道温度、自动改变投球间隔时间，具有一定的智能性，可靠性和实用性。     

A concise process technology for 3-D suspended radio frequency micro-inductors on silicon substrate

In this letter, a concise process technology is proposed for the first time to enable the fabrication of good quality three-dimensional (3-D) suspended radio frequency (RF) micro-inductors on bulk silicon, without utilizing the lithography process on sidewall and trench-bottom patterning. Samples were fabricated to demonstrate the applicability of the proposed process technology.     

Interfacial segregation of Ti in the brazing of diamond grits onto a steel substrate using a Cu-Sn-Ti brazing alloy

Diamond grits were brazed onto a steel substrate using a prealloyed Cu-10Sn-15Ti (wt pct) brazing alloy at 925 °C and 1050 °C. Due to the relatively high concentration of Ti in the brazing alloy, the braze matrix exhibited a composite structure, composed of β-(Cu,Sn), a Cu-based solid solution, and various intermetallic compounds with different morphologies. The reaction of Ti with diamond yielded a continuous TiC layer on the surfaces of the diamond grits. On top of the TiC growth front, an intermetallic compound, composed of Sn and Ti, nucleated and grew into a randomly interwoven fine lacey structure. An interfacial structure developed as the interwoven fine lacey phase was semicoherently bonded to the TiC layer, with the Cu-based braze matrix filling its interstices. The thickness of such a composite layer was increased linearly with the square root of isothermal holding time at 925 °C, complying with the law of a diffusion-controlled process. However, at 1050 °C, the segregation behavior of Ti and Sn to the interfaces between the TiC layer and the braze matrix diminished, due to the increased solubility of Ti in the Cu-based liquid phase. The enhanced dissolution of Ti in the Cu-based liquid phase at 1050 °C also caused the precipitation of rod-like CuTi with an average diameter of about 0.2 μm during cooling. SnTi₃ was the predominant intermetallic compound and existed in three different forms in the braze matrix. It existed as interconnected grains of large size which either floated to the surface of the braze matrix or grew into faceted grains. It also exhibited a nail-like structure with a mean diameter of about 1 μm for the rod section and a lamellar structure arising from a eutectic reaction during cooling.     

A random switching method for HPWM full-bridge inverter

To overcome the problem of unequal switching loss in power switches, in conventional hybrid pulse width modulation (HPWM) full-bridge inverters, a random switching method for HPWM full-bridge inverters is proposed. The proposed method equalizes switching losses of the four switches, while also providing good output performance     

N_2S_2或N_3S型配体的合成、~(99)Tc~m标记及生物分布研究

以MAG3为基本分子骨架，根据构效关系，分别引入合适的天然氨基酸，设计合成了4种N2S2或N3S型小分子多肽新配体，并通过了IR，^1H NMR,^13C NMR,MS谱学鉴定和元素分析表征。采用葡庚糖酸钙（GH）交换法对4个配体进行了^99Tc^m标记，研究了配合物在小鼠体内的生物分布特征。结果表明，^99Tc^m-MVGG肾摄取较高，滞留时间较长，血清除快，且肾与其它组织的活度比值高，具备成为肾功能显像剂的条件；^99Tc^m-MPGG肾初始摄取较高，R（肾／血）活度比值高，但肾清除较快，R（肾／肝）活度比值较低；^99Tc^m-MVTC和^99Tc^m－MPTC心肌初始摄取均较高，但在心肌和血中的清除速度较快。     

等偏移距自动初至静校正

茅金根 ,梁秀文 ,杨午阳 ,冯有奎 .等偏移距自动初至静校正 .石油地球物理勘探 ,2 0 0 2 ,37(5 ) :4 6 9～ 4 72　　本文提出一种自动计算静校正量的新方法。它首先在等偏移距道集内对相邻道的初至波采用高精度相关构建一个关于炮、检时差的超大矩阵方程 ,然后采用优化统计迭代算法求解炮点和检波点的静校正量 ,并用概率分布函数确定精确的炮、检静校正量 ,最后用误差校正函数消除炮、检静校正误差。实际资料处理结果表明 ,本方法自动、省时、精度高。     

浅谈水利枢纽道路工程建设中的几个问题及其对策

从水利枢纽工程建设的实际出发,分析了枢纽道路建设中的几个值得考虑的基本问题。针对永久性道路的建设环境和建筑特点以及临时性道路的复杂性和多样性,提出了永久性道路和临时性道路建设的基本对策。基于高新技术材料HEC作为道路建筑胶凝材料的实际工程应用,在道路结构布局观念、设计思想、建筑选材和施工工艺及其技术经济性能比等方面提出了枢纽道路工程建设的实施方案,其有效性和可推广性在水布垭道路工程建设中得到了印证。     

Improving signal prediction performance of neural networks through multiresolution learning approach.

In this paper, we extend the original work on multiresolution learning for neural networks, and present new developments on the multiresolution learning paradigm. The contributions of this paper include: (1) proposing a new concept and method of adjustable neural activation functions in multiresolution learning to improve neural network learning efficacy and generalization performance for signal predictions; (2) providing new insightful explanations for the multiresolution learning paradigm from a multiresolution optimization perspective; (3) exploring underlying ideas why the multiresolution learning scheme associated with adjustable activation functions would be more appropriate for the multiresolution learning paradigm; and (4) providing rigorous validations to evaluate the multiresolution learning paradigm with adjustable activation functions and comparing it with the schemes of multiresolution learning with fixed activation functions and traditional learning. This paper presents systematically new analytical and experimental results on the multiresolution learning approach for training an individual neural network model, demonstrates our integral solution on neural network learning efficacy, and illustrates the significant improvements on neural networks' generalization performance and robustness for nonlinear signal predictions.     

焊接领域中 AutoCAD的二次开发

应用AutoCAD已有的二次开发工具:AutoLISP、块和形定义及菜单开发对CAD在焊接领域应用进行了开发与定制。     

旋风分离器结构改进的研究

根据旋风分离器的工作原理及应用特点 ,分析了影响旋风分离器分离效率的因素及结构存在的问题 ,并提出了改进措施 ,即内管外壁增设螺旋翼片 ,扩散形锥体改为悬挂挡板。通过实验观察 ,改进结构的旋风分离器分离效率比常规旋风分离器高。实践证明 ,对于密度差异较小的非均相物系的分离 ,只要对旋风分离器作适当改进 ,仍能取得令人满意的效果 ,这大大拓宽了旋风分离器的应用领域