D301树脂分离衣康酸的工艺研究

采用弱碱性阴离子交换树脂Ｄ３０１对发酵法生产的衣康酸进行了分离研究。通过静态交换实验，研究了Ｄ３０１树脂对衣康酸的静态交换动力学，确定了传质机制和影响因素；通过动态交换实验，研究了以硫酸为洗脱剂，以氨水为再生剂的工艺过程，确定了主要工艺参数。     

微孔发泡塑料制备方法研究进展

综述了微孔发泡塑料制备方法的研究现状，分别介绍了几种常见的制备方法。提出了塑料微孔发泡技术中亟待解决的问题，并对微孔发泡塑料的研究及应用前景进行了展望。     

钛酸钾品须填充UHMWPE复合材料的摩擦磨损性能研究

用钛酸钾晶须(PTW)对超高摩尔质量聚乙烯(UHMWPE)进行填充改性,考察了复合材料的摩擦磨损性能,研究了其结晶情况,观察了磨损表面形貌并分析了其机理.结果表明随着PTW用量的增加,复合材料的硬度、结晶度以及维卡软化点都有所增大.PTW提高了复合材料的耐磨性,但摩擦系数有所上升.PTW的加入使得UHMWPE的磨损机理从黏着磨损和塑性变形改变成疲劳磨损和轻微的塑性变形,提高了其抗磨粒磨损的性能.     

基于自由运动一维标定物的多摄像机参数标定方法与实验

一维标定方法易于实现且标定效率高,为了克服现有一维标定方法的一些不足,本文提出一种用一维标定物标定多摄像机内外参数的方法,首先进行两两标定,在此过程中,假定主点坐标近似已知而仅考虑畸变、焦距、旋转和平移等参数,接着利用基本矩阵及一维标定物上特征点之间的几何约束,估计两摄像机的内外参数,两两标定完成后,采用Dijkstra最短路径法和捆绑调整对多摄像机系统进行全局标定(含主点坐标),仿真和真实实验表明本文的方法是切实有效的.     

亚砜基改性纤维素膜的SO2气体渗透性能研究

分别使用二甲基亚砜浸泡的物理方法及苯基乙烯基亚砜加成的化学方法对纤维素膜进行了改性,并对改性膜的性能进行了测试.结果表明改性后纤维素膜仍为致密结构,SO2的渗透性能及其对N2的分离性能明显提高,其中改性液中添加二甲基亚砜的均相化学加成反应所得的改性膜具有较好的SO2渗透稳定性.     

认知无线电网络信道交汇研究综述

认知无线电技术被认为是解决目前频谱资源利用率低下问题最有前景的技术,基于该技术,认知无线电网络采用动态频谱接入方式有效地提高了授权频段的利用率.然而,动态变化的信道可用性极大地增加了认知无线电网络组网的难度.信道交汇旨在为用户通信提供公共传输媒介,是实现无线网络组网的基础.介绍了认知无线电网络信道交汇的基本概念和特点,并阐述了信道交汇策略设计面临的挑战以及应考虑的性能指标.提出了信道交汇策略的分类标准和系统模型,根据该分类标准,详细剖析了当前信道交汇策略相关的研究工作.最后,讨论了认知无线电网络信道交汇研究的开放性问题,以期为未来的研究指出可能的方向和重点.     

A Study on the Friction and Wear Behavior of PTFE Filled with Acid Treated Nano‐Attapulgite

Summary: A solid lubricant composite material was prepared by compression molding PTFE and acid treated nano‐attapulgite. The friction and wear tests were performed on a block‐on‐ring wear tester. Scanning electron microscopy (SEM), energy‐dispersive X‐ray spectrometer (EDS) and DSC were utilized to investigate material microstructures and examine modes of failure. Experimental results showed that there was no significant change in coefficient of friction, but the wear rate of the PTFE composite was orders of magnitude less than that of pure PTFE. Acid treated nano‐attapulgite was superior to untreated nano‐attapulgite in enhancing the wear resistance of PTFE. Moreover, the wear resistance of the composite increased monotonically with increasing treated attapulgite concentration. Investigation of transfer film and analysis of debris for PTFE and its composite showed that acid treated nano‐attapulgite filled to PTFE could facilitate formation of transfer film on the steel ring surface and inhibit breakage of PTFE molecular chain. The PTFE composite with higher heat absorption capacity exhibited improved wear resistance. Furthermore, the steel ring counterface abrasion was not found.

Effect of load on the wear rate of PTFE and its composites.     

2H-1,4-苯并噁嗪类化合物合成研究进展

综述了不同取代基的2H-1,4-苯并噁嗪类化合物的合成方法。可以概括为两大类,其一以邻胺基苯酚或间卤苯酚为原料,与不同的-α卤代酸或酯反应,反应中不需要催化剂,在工业生产中普遍采用;另一类是用钯作催化剂,能扩大化合物的类型,并可选择性合成光学活性物质。     

热媒炉热效率分析及提高

分析指出了热媒炉热效率不高,主要是由于热媒炉盘管和烟气预热器等设备积灰较多以及油气比控制不精确等原因造成的,并提出了相应的对策,如热媒炉盘采用水洗,烟气预热器每天吹灰,油气比控制灵活调节等,取得了一定的效果。     

Molecular weight distribution of polyethylene catalyzed by Ziegler–Natta catalyst supported on MgCl2 doped with AlCl3

Ti‐based Ziegler–Natta catalysts supported on MgCl₂ doped with AlCl₃ were prepared by the reaction of MgCl₂/AlCl₃–ethanol adduct with TiCl₄. No AlCl₃ crystallites were found in the AlCl₃‐doped catalysts by WAXD analysis, suggesting that AlCl₃/MgCl₂ solid solution was formed. The effect of doping on the catalyst performance in ethylene polymerization was investigated. The results showed that the catalysts based on AlCl₃‐doped MgCl₂ support exhibited a slightly higher activity than did the MgCl₂‐supported catalyst and the molecular weight distribution (MWD) of polyethylene (PE) markedly increased (from 10.8 to 47.9) with the increase of AlCl₃ content in catalysts. The changes in catalyst's active center distribution were studied based on nonlinear fitting of the polymer GPC curves by multiple Flory functions. It was found that increase of types of active centers by introducing AlCl₃ into the support should be responsible for the broadening of MWD of PE. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1768–1772, 2006