Synthesis of fine composite particles for hydrogen storage, starting from Mg-YNi2 mixture

We synthesized new composite particles for hydrogen storage on the basis of an idea of “particle designing”. As starting materials, powders of Mg and YNi₂ were selected. Fine composite particles containing mainly Mg₂Ni could be designed by repetitive hydriding and dehydriding cycles at 673 K. In the synthesis process of the composite particles, the following two points were found to be essential for this technique. The first point is that, after being activated by the sequential processes of hydrogenation, amorphization and disproportionation, YNi₂ reacts effectively with Mg. The second point is that evaporated Mg, which occurs during dehydriding, adheres to the surface of the activated YNi₂ and accelerates a diffusion reaction to form Mg₂Ni at the interface. In these composite particles, Mg₂NiH₄ is formed, even at 373 K, under a hydrogen pressure of 5 MPa.     

Bisensors for amino acids

Two kinds of biosensors for amino acids (one with nonspecific enzyme as bioelement, the other with specific enzyme(s) as bioelement), including their principles, applications, recent researches and future trends were discussed in detail. 61 references were given. A part of work for gaining Ph. D in chemical and biochemical application at FPMs (Mons, Belgique) Synopsis of the first author Xia Jinlan, Male, born in 1963, now at Facult’e Polytechnique de Mons, Belgique     

农村电话用户市场调查与分析

受中国电信委托、原邮电部经济技术发展研究中心在全国进行一次农村电信市场调查，以了解当前农村通信市场发展潜力，本文公布了此次调查的结果，从经济能力、资费和潜在市场等方面提出了发展农话的建议 。     

双旋Y切石英振子厚度模式的频温特性的研究

本文利用描述固体中弹性声波的克里斯托费尔方程,建立了双旋Y切石英振子厚度模式的频温特性分析方法,并编制了相应的计算机程序。该程序可给出双旋Y切石英振子在任意切角(ф_3ф_1)下的厚度模(a、b、c模)的频率温度特性曲线。文中给出了单旋AT切、BT切(b模)、双旋SC切(b、c模)、FC切、IT切、LC切、NL_1切、NL_2切、AK切等各已知切型的频温特性曲线。对石英谐振器的切角灵敏度和切角误差进行了分析。     

Novel miniature integrated optical goniometers

A new principle and arrangement for directly determining the angle of incidence of an optical beam on an object are proposed and demonstrated. The novelty of the approach lies in the realization of a ‘smart object’, which extracts a portion of the incident beam's power into an optical waveguide attached to the object's surface or embedded in its body for converting the angle of incidence into the position of a guided beam with finite lateral extent. This ‘integrated optical light pointer’ beam is accomplished by means of creating additional degrees of freedom on the target in two different ways. While a first type is based on introducing spatial variations of the waveguide thickness, a second type makes use of a chirp of the grating periodicity. The feasibility for practical applications has been experimentally demonstrated by a direct comparison with a commercial high-resolution encoder, resulting in an r.m.s. error of <30′'. Measurements have been performed for chips fabricated based on replicated polycarbonate substrates and with no external optics, showing the great potential of this approach for realizing low-cost yet high-performance miniature goniometers.     

CaF_2-CaO-MgO-Al_2O_3-SiO_2电渣渣系高温力学性能的研究

本文针对结晶器与铸锭作相对移动的电渣重熔过程中对渣系的高温强度及塑性的要求,对10种CaF_2-CaO-MgO-Al_2O_3-SiO_2渣组成进行了渣的高温强度及塑性的测定,建立了渣组成—渣的岩相结构—渣高温强度及塑性间的对应关系,并选择出较合适的成分范围为CaF_2 35～60％,CaO 10～25％,Al_2O_3 10～20％,SiO_25～15％,MgO≈5％。对其中一个成分的渣进行了电渣热穿孔熔铸中空锭生产实验,并取得了良好的表面质量。     

通用菜单系统—UMS

下拉菜单作为应用软件系统的用户界面已成为一种趋势。本文提供一种可以在UNIX和DOS操作系统环境下运行的通用菜单系统UMS（Universal Menu System)。文中对UMS中菜单的数据结构、菜单的用户描述、菜单系统程序的自动生成、菜单的初始化、菜单的实现技术和操作以及应用软件的耦合等技术问题都进行了详细的讨论。同时也指出了软件存在的问题。     

木犀科植物花粉的扫描电镜研究

植物花粉的形态特征具有种属特异性。本文用扫描电子显微镜观察了木犀科(Oleaceae)的六属八种植物花粉的形态特征。结果表明,除迎春有个别四萌发沟外,其它花粉都是三沟型,外壁纹饰均为网状。但各种植物花粉的细微形态仍有明显差异。因此,用扫描电镜观察研究植物花粉的亚微形态特征,可为植物分类提供一些必要的形态依据。     

Radix-4 Vectoring CORDIC Algorithm and Architectures

In this work we extend the radix-4 CORDIC algorithm to the vectoring mode (the radix-4 CORDIC algorithm was proposed recently by the authors for the rotation mode). The extension to the vectoring mode is not straightforward, since the digit selection function is more complex in the vectoring case than in the rotation case; as in the rotation mode, the scale factor is not constant. Although the radix-4 CORDIC algorithm in vectoring mode has a similar recurrence as the radix-4 division algorithm, there are specific issues concerning the vectoring algorithm that demand dedicated study. We present the digit selection for nonredundant and redundant arithmetic (following two different approaches: arithmetic comparisons and table look-up), the computation and compensation of the scale factor, and the implementation of the algorithm (with both types of digit selection) in a word-serial architecture. When compared with conventional radix-2 (redundant and non-redundant) architectures, the radix-4 algorithms present a significant speed up for angle calculation. For the computation of the magnitude the speed up is very slight, due to the nonconstant scale factor in the radix-4 algorithm.     

本征吸除硅片特性研究

本文描述硅本征吸杂片的特性参数,如吸除区宽度、洁净度,氧沉淀密度、MOS电容寿命,介绍了表面态密度及残余间隙氧浓度的检测方法和工艺对参数的影响及参数之间的内在联系,文章还实验论证了不同参数水平对器件成品率的影响,建立了以MOS电容寿命为主导的参数控制方法,利用本文提供的控制参数,可使CCD-512器件成品率达60％,以上优品率≥85％。