[Zn(BDC)(H2O)2]n: a novel blue luminescent coordination polymer constructed from BDC-bridged 1-D chains via interchain hydrogen bonds (BDC = 1,4-benzenedicarboxylate)

A novel coordination polymer [Zn(BDC)(H₂O)₂]_n 1 (where BDC = 1,4-benzenedicarboxylate), has been synthesized and characterized by X-ray diffraction. 1 crystallizes in the monoclinic space group C2/c, a=15.09(2) Å, b=5.058(7) Å, c=12.196(16) Å, β=103.62(2)°, , Z=4. The most striking feature of 1 is that it consists of a high-dimensional network structure constructed from BDC-bridged 1-D chains via interchain hydrogen bonds. The coordination sphere of the zinc(II) ion is a distorted tetrahedron completed by four oxygen atoms from two water molecules and two BDC ligands. BDC adopts the bis-monodentated (syn–anti) coordination mode linking two adjacent zinc(II) ions. 1 shows strong blue photoluminescence as the result of the fluorescence from the intraligand emission excited state.     

高聚合度PVC／TPU共混物的制备与研究

本文研究了采用高聚合度聚氯乙烯(PVC)和热塑性聚氨酯(TPU)为主体材料制备高聚合度PVC/TPU共混物的过程,讨论了高聚合度PVC/TPU并用比、填料、增塑剂、共混工艺等因素对高聚合度PVC/TPU共混物性能的影响。     

甲缩醛空气氧化制甲醛催化剂的研制和工艺条件探讨

考察了铁钼催化剂对甲缩醛空气氧化制甲醛的催化性能。制备了多种不同钼铁比和第三、第四组分的催化剂,进行了活性评价和筛选,探讨了适宜的工艺条件范围。对于所选定的催化剂(钼铁比为1.82～1.88;铬铁比为0.1～0.38)在适宜的工艺条件(甲缩醛进料浓度4.5～5.5％;甲缩醛和氧气进料比1:2.0±0.2;空速12000～22000h~(-1);热点温度370～390℃)下,甲醛收率可达85％左右。     

直接甲醇燃料电池用碳气凝胶载铂催化剂的研究

利用溶胶—疑胶方法制备了高比表面积的碳气凝胶,利用浸渍还原法制备了Pt/碳气凝胶和Pt/C催化剂。采用BJH和TEM考察碳气凝胶的孔径分布和金属粒子的大小与分布,循环伏安曲线测试考察Pt/碳气凝胶对甲醇催化氧化性能的影响。结果表明,碳气凝胶的比表面积达到480 m2/g,孔径分布良好,催化剂金属颗粒较小,分散较好,循环伏安曲线图显示出Pt/碳气凝胶比传统的Pt/C对甲醇催化氧化性能高。     

Analysis of saturated free fatty acids from pollen by HPLC with fluorescence detection

A sensitive method for the determination of free fatty acids using 2‐(2‐(anthracen‐10‐yl)‐1H‐naphtho[2,3‐d]imidazol‐1‐yl) ethyl‐p‐toluenesulfonate (ANITS) as tagging reagent with fluorescence detection has been developed. ANITS could easily and quickly label fatty acids in the presence of the K₂CO₃ catalyst at 90 °C for 40 min in N,N‐dimethylformamide solvent. From the extracts of rape bee pollen samples, 20 free fatty acids were sensitively determined. Fatty acid derivatives were separated on a reversed‐phase Eclipse XDB‐C₈ column by HPLC in conjunction with gradient elution. The corresponding derivatives were identified by post‐column APCI/MS in positive‐ion detection mode. ANITS‐fatty acid derivatives gave an intense molecular ion peak at m/z [M+H]⁺; with MS/MS analysis, the collision‐induced dissociation spectra of m/z [M+H]⁺ produced the specific fragment ions at m/z [M–345]⁺ and m/z 345.0 (here, m/z 345 is the core structural moiety of the ANITS molecule). The fluorescence excitation and emission wavelengths of the derivatives were λ_ex = 250 nm and λ_em = 512 nm, respectively. Linear correlation coefficients for all fatty acid derivatives are >0.9999. Detection limits, at a signal‐to‐noise ratio of 3 : 1, are 24.76–98.79 fmol for the labeled fatty acids.     

曝气量对自热式高温好氧消化(ATAD)中试工艺运行的影响

设计了由两个圆罐串联的自热式高温好氧消化中试系统，处理城市污水污泥.采用批式试验，测试氧化还原电位（ORP），探讨曝气量对污泥稳定化处理效果的影响.试验发现，曝气量不能过高或过低，过高起到散热作用，使反应器自升温的温度下降，过低则影响微生物的活性，反应器的温度也低，两种情况都会造成挥发性悬浮固体（VSS）去除率降低.对于VSS浓度为46.6g/L的污泥，曝气量取0.6～1.0m^3/h较好，VSS的去除率可达到39.2%，趋于稳定化.通过测试ORP发现微氧环境有利于VSS的降解，提高VSS的去除率.在消化过程中反应器内ORP最低为-360mV，反应器中不仅有好氧菌，还存在厌氧菌和兼性菌。     

合成气中氨含量测定方法的改进

用快速测定仪测定气体中的氨含量，采气量为50ml，可准确测出高含量氨体积百分比含量为80%-100%和低含量氨体积百分比含量为1%-20%的样气，该仪器结构简单，易于制造，测定过程简单，结果准确，一目了然。     

聚羟基脂肪酸酯的合成和应用研究进展

介绍了聚羟基脂肪酸酯(PHA)的合成方法，重点讨论了微生物合成法、碳源、化学合成、分离方法及降低PHA生产成本的方法，介绍了PHA的性能及其改性研究，论述了PHA在生物医学、农业、电子、食品包装等领域的应用。     

固相接枝共聚法制备PP—g—PS

用固相接枝共聚方法制备了聚丙烯接枝苯乙烯(PP-g-PS),详细地考察了聚丙烯与引发剂的品种、反应温度、苯乙烯及引发剂的浓度等因素对接枝率和接枝效率的影响。研究结果表明:PP-g-PS具有较高的接技率,应用于聚丙烯/聚苯乙烯(PP/PS)共混物中,能降低分散相PS的粒径,提高PP/PS的相容性。     

相容剂对聚丙烯／滑石粉增容作用研究

作者采用熔融接技方法制备PP-g-AA和PP-g-MAH,并比较了这两种相容剂对PP/滑石粉体系的增容效果。着重研究了引发剂含量、单体含量对PP-g-AA增容作用的影响以及PP-g-AA用量对PP/滑石粉体系力学强度的影响。