Desorption kinetics of trichloroethylene and perchloroethylene from aged dense nonaqueous phase liquid-contaminated soil

Batch experiments were conducted to investigate the desorption kinetics of a contaminated soil collected from a field site at Hill Air Force Base (AFB), Utah. The site has been contaminated with many dense nonaqueous phase liquids (DNAPLs), primarily trichloroethylene (TCE) and perchloroethylene (PCE), for more than 60 years. Similar desorptive behaviour of both TCE and PCE was observed: a stage of fast release of the contaminant at the start followed by a very slow stage. Moreover, it is suggested that not all the contaminant in the solid phase may be released to the aqueous phase, apparently due to the age factor. Local variations were observed in the effective diffusivity and other sorption-related parameters across the site due to aquifer heterogeneity. Experimental results were then simulated using a numerical code based on the intraparticle diffusion model. Good agreement was found between both results.     

Electrochemical degradation of waters containing O-Toluidine on PbO2 and BDD anodes

Electrochemical oxidation of O-Toluidine (OT) was studied by galvanostatic electrolysis using lead dioxide (PbO₂) and boron-doped diamond (BDD) as anodes. The influence of operating parameters, such as current density, initial concentration of OT and temperature was investigated. Measurements of chemical oxygen demand were used to follow the oxidation. The experimental data indicated that on PbO₂ and BDD anodes, OT oxidation takes place by reaction with electrogenerated hydroxyl radicals and is favoured by low current density and high temperature. Furthermore, BDD anodes offer significant advantages over PbO₂ in terms of current efficiency and oxidation rate.     

低k集成的曙光

随着对新化学品和集成方案了解的加深，我们不但可以减轻介电层孔隙率增加引起的负担还可以降低工艺对超低k薄膜的损伤。     

Magnetic behavior of nickel–bismuth ferrite synthesized by a combined sol–gel/thermal method

The bulk NiFe_2?xBi_xO₄ ferrites with various Bi³⁺ concentration (x=0, 0.1, 0.15) were synthesized via sol–gel procedure, starting from nickel, bismuth and iron nitrate powders, followed by the conventional thermal treatment. The structural and magnetic properties of the as-prepared ferrites were studied by means of X-ray diffraction, alternating gradient force magnetometry and Faraday balance. The anisotropy constant was determined by the law of approach to saturation (LAS) model. An increasing Bi³⁺ concentration in NiFe_2?xBi_xO₄ leads to a decrease in the saturation magnetization, Néel temperature and the anisotropy constant of the material.     

The 12<Superscript>th</Superscript> World Conference on Titanium presents research and applications of “wonder metal”

The International Conference on Titanium was begun in 1968 to assess the national significance attached to the development of titanium in relation to the technical needs of the participating countries. The conference, held every four years, attracts strong international participation. This article reviews the 12^th World Conference on Titanium, hosted by the Nonferrous Society of China and held in Beijing, China, 19–24 June 2011.     

Study of features based on nonlinear dynamical modeling in ECG arrhythmia detection and classification

We present a study of the nonlinear dynamics of electrocardiogram (ECG) signals for arrhythmia characterization. The correlation dimension and largest Lyapunov exponent are used to model the chaotic nature of five different classes of ECG signals. The model parameters are evaluated for a large number of real ECG signals within each class and the results are reported. The presented algorithms allow automatic calculation of the features. The statistical analysis of the calculated features indicates that they differ significantly between normal heart rhythm and the different arrhythmia types and, hence, can be rather useful in ECG arrhythmia detection. On the other hand, the results indicate that the discrimination between different arrhythmia types is difficult using such features. The results of this work are supported by statistical analysis that provides a clear outline for the potential uses and limitations of these features.     

A new real-time retinal tracking system for image-guided laser treatment

A new system is proposed for tracking sensitive areas in the retina for computer-assisted laser treatment of choroidal neovascularization (CNV). The system consists of a fundus camera using red-free illumination mode interfaced to a computer that allows real-time capturing of video input. The first image acquired is used as the reference image and utilized by the treatment physician for treatment planning. A grid of seed contours over the whole image is initiated and allowed to deform by splitting and/or merging according to preset criteria until the whole vessel tree is demarcated. Then, the image is filtered using a one-dimensional Gaussian filter in two perpendicular directions to extract the core areas of such vessels. Faster segmentation can be obtained for subsequent images by automatic registration to compensate for eye movement and saccades. An efficient registration technique is developed whereby some landmarks are detected in the reference frame then tracked in the subsequent frames. Using the relation between these two sets of corresponding points, an optimal transformation can be obtained. The implementation details of proposed strategy are presented and the obtained results indicate that it is suitable for real-time location determination and tracking of treatment positions.     

Controlled-release naproxen using micronized ethyl cellulose by wet-granulation and solid-dispersion method

This study has been undertaken to develop a controlled-release tablet dosage form of naproxen using ethocel (ethyl cellulose) as the rate-controlling polymer. The formulations were made by employing the conventional wet-granulation method and the solid-dispersion method. Tablets made by both methods were compared for their controlled-release dissolution profiles. Both methods were useful in developing the controlled-release formulations of naproxen with desirable properties. However, the amount of polymer required to make a formulation with the desired release profile was 33% less via solid dispersion than via wet granulation. A cumulative 88% of naproxen was released from the solid-dispersion formulation, compared with 84% from the wet-granulation formulation.