Preliminary studies using hybrid mediated electrochemical oxidation (HMEO) for the removal of persistent organic pollutants (POPs).

This study investigates the hybrid mediated electrochemical oxidation (HMEO) technology, which is a newly developed non thermal electrochemical oxidation process for organic destruction. A combination of ozone and ultrasonication processes to the mediated electrochemical oxidation (MEO) process is termed as hybrid mediated electrochemical oxidation. The electrochemical cell was developed in this laboratory. In the present study, several organic compounds, such as phenol, benzoquinone and ethylenediaminetetraacetic acid (EDTA), were chosen as the model organic pollutants to be destructed by the hybrid process. The organic destruction was monitored based on the CO2 generation and total organic carbon (TOC) reduction. The HMEO process was found to be extremely effective in the destruction of all the target organics chosen in this study. The information obtained from this study will provide an insight in adopting this technique for dealing with more recalcitrant organics (POPs).     

Factors affecting the activity of anammox bacteria during start up in the continuous culture reactor.

Factors affecting cultivation of extremely slow-growing bacteria (anaerobic ammonium oxidiser, doubling time 11 days) were investigated by using upflow anaerobic sludge blanket (UASB) reactors which can maintain high solid retention time. The effects of concentrations of DO, free ammonia (FA), and nitrite on activation of anammox activity were tested during the start-up period. The reactor was inoculated with granular sludge collected from a full-scale UASB reactor used for treating brewery wastewater, and sludge from a piggery wastewater treatment plant and rotating biological contactor treating sewage. Results of continuous operation showed that concentrations of DO, free ammonia (FA) and nitrite in the reactors played a key role in stimulating the anammox activity during start-up period. It is crucial to keep DO below 0.2 ppm, FA below 2 mg/L and nitrite nitrogen below 35 mg/L to cultivate anammox cells in the continuous bioreactor. When the levels of DO, FA and nitrite in the influent were controlled at less than the inhibition levels, the anammox activity increased gradually in the anaerobic condition. Addition of hydrogen sulphide into the reactor enhanced anammox activity in the continuous culture. Through the SEM, TEM and FISH analysis, anammox bacteria were detected in the granular sludge after 3 months of continuous operation.     

On the behavior of microstructures with multiple length scales

The current study aims to provide fundamental insight into the behavior of microstructures containing grain sizes that span multiple length scales. A commercial 5083 Al alloy was selected as the material of interest to facilitate comparison with recently published data. The materials studied here were prepared via the thermal consolidation of powders that were cryomilled for different times (i.e., 0, 2, 4, and 8 hours). Following consolidation, the resultant microstructure was characterized by an equiaxed grain morphology with a size distribution centered around 200∼300 nm. Dispersed among the 200- to 300-nm grains were coarse-grained regions or ligaments with a grain size ranging from 600 nm to 2 μm. The occurrence of coarse-grained regions is rationalized on the basis of recrystallization or subgrain coarsening, whereas the occurrence of equiaxed fine regions is proposed to be a result of continuous grain growth. Two types of microstructures were selected for study, containing coarse-grained volumes of approximately 28 pct and 43 pct that corresponded to an ultimate tensile strength (UTS) of 566 MPa and 535 MPa, and a fracture strain of 3.2 pct and 3.5 pct, respectively. The observed ductility and the relevant toughening mechanisms were discussed in light of the presence of multiple length scales.     

Model concrete beam-column joints subjected to cyclic loading at two rates

Small-scale models of reinforced concrete beam-column joint were subjected to large cyclic displacements at two rates: 2.5×10⁻³ and 1.0 Hz. To assess damage, free-vibration tests were conducted. The reliability of the modelling techniques was established by comparison of the results for the slower rate with those obtained from the full-scale tests on prototype. The higher rate of loading caused a greater damage than that at the lower rate. This was evidenced by the measurements of the energy absorbed in the hysteresis loops, equivalent damping, and the stiffness and damping obtained from the free-vibration test. The relatively greater extent of damage appears to result from the different bond behaviour at different rates of loading.     

A reliability model for a k-out-of-N:G redundant system with multiple failure modes and common cause failures

The paper presents a reliability model of a k-out-of-N:G redundant system with M mutually exclusive failure modes and common cause failures. Failed system repair times are arbitrarily distributed. The system is in a failed state when (N−k+1) units failed or a common cause failure occurred. Laplace transforms of the state probabilities and the availability of the system are derived. Finally, the system steady-state availability is also reported.     

Factor structure of the SOCRATES in a clinical sample of adolescents.

This study investigated the Stages of Change Readiness and Treatment Eagerness Scale (SOCRATES: W. R. Miller & J. S. Tonigan, 1996) in adolescents presenting for treatment of alcohol use disorder (AUD). The participants were 80 males and 43 females (mean age=16.8 years) who presented for AUD treatment (95.1% outpatient, 4.9% inpatient). Participants completed assessments at baseline and 1 year and provided information on alcohol use and related variables monthly between these 2 assessments. Principal-components and confirmatory factor analyses of the baseline SOCRATES identified 2 factors, Taking Steps and Recognition, which showed good internal consistency and concurrent and predictive evidence of validity. The results were interpreted as supporting the use of the SOCRATES with clinical samples of adolescents. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A systematic design method to obtain broadband characteristics for singly-fed electromagnetically coupled patch antennas for circular polarization

We present a systematic, empirical design technique to obtain optimum broadband impedance, axial-ratio (AR) and gain bandwidths for a singly-fed electromagnetically coupled patch antenna for circular polarization. Our investigation has also revealed tradeoffs amongst obtainable AR, impedance bandwidth and AR bandwidth. Using two design examples at different frequency bands and for different senses of circular polarization, we have demonstrated the effectiveness of the proposed knowledge-based tuning method. We have obtained at C-band measured values of impedance bandwidth (VSWR/spl les/2) equal to 43%, 3-dB AR bandwidth of 8%, AR of less than 0.3 dB and a mean gain level of 7 dB. For the Ku-band element, a 40% impedance bandwidth and a 17.3% of 3-dB AR bandwidth have been obtained with a peak gain of 7.2 dBic.     

Proton-exchanged LiNbO/sub 3/ optical waveguides using stearic acid

Proton-exchanged optical waveguides have been fabricated in z-cut LiNbO/sub 3/ using a new proton source: stearic acid. These waveguides were characterized optically and were found to exhibit a step index profile with Delta n=0.118 measured at 0.633 mu m. The propagation losses were typically around 1.5 dB/cm, and the diffusion constant and the activation energy for the proton-exchange process were measured to be 5*10/sup 6/ mu m/sup 2//h and 69 kJ/mol, respectively.<>