On the effects of the packet size distribution on the packet loss process

Real-time multimedia applications have to use forward error correction (FEC) anderror concealment techniques to cope with losses in today’s best-effort Internet. The efficiency of these solutions is known however to depend on the correlation between losses in the media stream. In this paper we investigate how the packet size distribution affects the packet loss process, that is, the distribution of the number of lost packets in a block, the related FEC performance and the average loss run length. We present mathematical models for the loss process of the MMPP+M/D/1/K and the MMPP+M/M/1/K queues; we validate the models via simulations, and compare the results to simulation results with an MPEG-4 coded video trace. We conclude that the deterministic packet size distribution (PSD) not only results in lower stationary loss probability than the exponential one, but also gives a less correlated loss process, both at a particular average link load and at a particular stationary loss probability as seen by the media stream.Our results show that for applications that can only measure the packet loss probability, the effects of the PSD on FEC performance are higher in access networks, where a single multimedia stream might affect the multiplexing behavior. Our results show that the effects of the PSD on FEC performance are higher in access networks, where a single multimedia stream might affect the multiplexing behavior and thus can improve the queuing performance by decreasing the variance of its PSD.     

A Method to Measure Emissions from Dryers with Diffuse Leakages, Using Evaporated Water as a Tracer

This paper describes a novel method to measure emission from dryers. The method resolves the known difficulties caused by diffuse emissions, and also solves the problems associated with high moisture content of the drying medium. The basic idea is to use water vapor to determine the exhaust flow, while a dry ice trap is used both to preconcentrate emitted VOCs and to determine the moisture content of the drying medium.     

On the effect of spatial variances in historical rainfall time series to CSO performance evaluation.

Historical, high-resolution rain series are the backbone of modern combined sewer overflow (CSO) structure design. These rain series are the input to the computational estimation of the performance of the measures with respect to CSO pollution abatement. However, those historical precipitation measurements are available at only a few locations. Frequently rain series have to be used from gauging stations at a significant distance. In order to judge and to compensate for this influence an estimate between rain characteristics and combined sewer outflow (CSO) performance indicators would be useful. In this paper such correlations have been sought for a collection of 37 rain series covering large areas of Europe. It was found that the mean annual rain volume can explain most of the variances for the performance indicators Number of overflows and CSO volume. For explaining the spatial differences in the efficiency of the CSO structure another rain characteristic, i.e. the maximum event with a return period of one year, is to be used.     

Electro-organic synthesis without supporting electrolyte: Possibilities of solid polymer electrolyte technology

The application of ion exchange membranes as solid polymer electrolytes (SPE) in fuel cells is state-of-the-art. This technology needs no supporting electrolyte; consequently it can be applied for electro-organic syntheses in order to save process steps. In this case the process is not predetermined to a maximized energy efficiency so that the selection of the cell design, of the electrode materials and of the operating conditions can be focused on a high selectivity of the electrode reactions. The electro-osmotic stream, which is caused by the solvation shells of the ions during their migration through the membrane, and hence is a typical property of SPE technology, has a significant effect on the electrode reactions. It generates enhanced mass transfer at the electrodes, which is beneficial for reaction selectivity. It can be influenced by the choice of, and possibly by the preparation of, the membrane. An additional remarkable advantage of SPE technology is the exceptional long durability of oxide coated electrodes. By combination of several process engineering methods stable operation of SPE cells has been realized, even for examples of non-aqueous reaction systems. Experiments up to 6000 h duration and in cells of up to 250 cm² membrane area show the potential for industrial application.     

Strengthening of concrete prisms using the plate-bonding technique

This paper presents the use of fracture mechanics for the plate bonding technique. Plates of steel or carbon-fibre reinforced plastic are bonded with an epoxy adhesive to rectangular concrete prisms and loaded in shear up to failure, what is normally known in fracture mechanics as mode II failure. In this special application a linear and a nonlinear approach are presented. The nonlinear equation derived for a realistic shear-deformation curve can only be used for numerical calculations. However, for simplified shear-deformation curves, the derived formula can be solved analytically. Results from tests, which are compared with the theory, are also presented.     

Electromigration-induced damage in bamboo Al interconnects

Depletion and hillock formation were examined in-situ in a scanning electron microscope (SEM) during electromigration of bamboo Al interconnect segments. Hillocks formed directly at the anode ends of the segments by epitaxial addition of Al at the bottom Al/TiN interface. Depletion occurred nonuniformly from the cathode end and stopped once the distance between the leading void and the hillock reached the critical length for electromigration at the given current density. A modified equation for the drift velocity is proposed, which includes the effect of nonuniform depletion and predicts that interconnects with nonuniform depletion are more reliable than those with uniform depletion.     

Van vleck paramagnetism of the diluted intermetallic compounds Pr1−x Y x Ni5 at fields up to 15 T

We have measured the 16 Hz susceptibility of the diluted Van Vleck paramagnets Pr_1−x Y _x Ni₅ withx=0.00, 0.05, 0.10. 0.20 at temperatures 1.5 K≤T≤50 K and magnetic fields up to 15T. Their Van Vleck type magnetic susceptibility χ(T, B, x) strongly depends on the field atB≥6 T. The temperatureT _max(B, x) of the maximum of χ(T, B, x) decreases at increasing the field from zero to 15 T by approximately one order of magnitude for all Pr_1−x Y _x Ni₅ compounds. Changing the dilutionx from zero to 0.20, the field whereT _max(B, x) strongly drops is increased from 9 T to 11 T. Our data agree qualitatively with the predictions of a point charge model which considers the Zeeman term in addition to the electronic exchange and the dominating crystal field contributions.     

Serum antibody opsonic activity against Actinobacillus actinomycetemcomitans in human periodontal diseases

Actinobacillus actinomycetemcomitans is frequently associated with severe periodontitis. Many periodontitis patients have elevated levels of serum IgG antibodies to A. actinomycetemcomitans, but the role of these antibodies is unknown. This study evaluated the functional capacity of anti-A. actinomycetemcomitans IgG antibody to enhance phagocytosis of A. actinomycetemcomitans by polymorphonuclear leukocytes. Chemoluminescence assays were done using sera from 64 subjects, 61 of whom had severe periodontitis; results were compared with the subject's anti-A. actinomycetemcomitans IgG titer and avidity. There was a strong correlation between chemoluminescence and antibody log titer (P < .00001) and a weak correlation between chemoluminescence and antibody avidity (P < .05). The results support the hypothesis that anti-A. actinomycetemcomitans IgG antibodies are important in promoting phagocytosis and killing of A. actinomycetemcomitans. Subjects who develop high levels of highly avid antibodies against A. actinomycetemcomitans may have greater resistance to continued or repeated infection by this pathogen.