Effect of calcium hydroxide removal techniques on the bond strength of root canal sealers

To evaluate the influence of calcium-hydroxide(CH) with different vehicles on the push-out bond strength of different canal sealers to radicular dentin. 152 decrowned single-rooted human teeth were used. After preparation of root canals with nickel-titanium rotary files, 8 roots served as control groups. Then, the roots were divided as follows: (1) Calasept and (2) Surepaste (n = 72). Roots were further subgrouped according to the CH removal techniques: (1) %17 ethylenediaminetetraacetic acid (EDTA) + rotary file, (2) %17EDTA + hand file, and (3) %17EDTA (n = 24). Eight roots from each group sectioned longitudinally, divided into two pairs and photographed by stereomicroscope (n = 16). The remaining 16 roots in CH intracanal dressing groups were further divided into 2 subgroups according to the sealer used: (1) AH-Plus-jet and (2) Apexit-Plus (n = 8). Bond strengths of the root canal sealers to root canal dentin were measured using a push-out test setup. The data were statistically analyzed using multivariate analysis of variance p = 0.05. The push-out bond strength values were significantly affected by type of vehicle and the removal techniques (p < 0.05). The mean bond strength of AH-Plus-jet was significantly higher than Apexit-Plus, regardless of type of vehicle and the removal techniques (p < 0.05). There was no difference between vehicles on CH removal (p > 0.05). When examining the removal techniques, only irrigation with %17 EDTA left significantly larger amount of residue (p < 0.05). AH-Plus-jet showed better dislocation resistance than Apexit-Plus. Type of vehicle does not play a fundamental role in the degree of persistence of CH residues on the dentin walls. Instrumentation improves the removal efficiency of CH from root canal.     

Highly porous starch/poly(ethylene‐alt‐maleic anhydride) composite nanofiber mesh

In this study, starch‐based hybrid electrospun nanofiber meshes were fabricated by electrospinning. Spinning solutions were prepared by mixing starch and certain amounts of poly(ethylene‐alt‐maleic anhydride). Starch‐based nanofiber meshes became insoluble in water with thermal‐induced esterification of hydroxyl groups onto starch backbone. Morphologic and structure analysis of the electrospun nanofiber meshes were investigated by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) techniques. Thermal properties of nanofiber meshes were characterized by thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). Thermal stability of nanofiber meshes were increased with formation of intermolecular bonds between starch and poly(ethylene‐alt‐maleic anhydride). POLYM. COMPOS. 34:1321–1324, 2013. © 2013 Society of Plastics Engineers     

Acetylation of Wood with Various Catalysts

Abstract

The purpose of this study was to compare two different acetylation mechanisms using acetic anhydride (AA) or vinyl acetate (VA) modification with using various catalysts. Acetylation of Scots pine wood flour with acetic anhydride could be significantly improved in the presence of potassium acetate, potassium carbonate, and sodium carbonate at 100°C. Sodium carbonate had low effect on VA acetylation, potassium acetate was found to be more effective, and potassium carbonate was better for vinyl acetate modification of wood flour. The two modification methods and the effect of different catalysts on AA or VA modification were characterized by infrared and NMR spectra and analyzed in detail. The acetylation of Scots pine flour with VA and AA showed almost the same WPG values for catalysts when based on long reaction times.     

Reservoir water effects on earthquake performance evaluation of Torul Concrete-Faced Rockfill Dam

This study presents earthquake performance analysis of the Torul Concrete-Faced Rockfill (CFR) Dam with two-dimensional dam-soil and dam-soil-reservoir finite element models. The Lagrangian approach was used with fluid elements to model impounded water. The interface elements were used to simulate the slippage between the concrete face slab and the rockfill. The horizontal component of the 1992 Erzincan earthquake, with a peak ground acceleration of 0.515g, was considered in time-history analysis. The Drucker-Prager model was preferred in nonlinear analysis of the concrete slab, rockfill and foundation soil. The maximum principal stresses and the maximum displacements in two opposite directions were compared by the height of the concrete slab according to linear time-history analysis to reveal the effect of reservoir water. The changes of critical displacements and principal stresses with time are also shown in this paper. According to linear and nonlinear time-history analysis, the effect of the reservoir water on the earthquake performance of the Torul CFR Dam was investigated and the possible damage situation was examined. The results show that the hydrodynamic pressure of reservoir water leads to an increase in the maximum displacements and principal stresses of the dam and reduces the earthquake performance of the dam. Although the linear time-history analysis demonstrates that the earthquake causes a momentous damage to the concrete slab of the Torul CFR Dam, the nonlinear time-history analysis shows that no evident damage occurs in either reservoir case.     

Complementary Energy Based Formulation for Torsional Buckling of Columns

A unique formulation for the elastic torsional buckling analysis of columns is developed in this paper based on the principle of stationary complementary energy. It is well known that in displacement based numerical formulations, discretization errors lead to stiffer behavior; hence convergence from above. On the other hand, discretization errors in complementary energy based numerical formulations lead to softer behavior in linear elasticity problems, which is a desired feature from the engineering view point. However, complementary energy based formulations can only overpredict the buckling loads for the flexural buckling problems of columns unless the physical conditions are compromised. In this study a formulation based on the principle of stationary complementary energy is considered for the elastic torsional buckling analysis of columns. The complementary energy expression is obtained from the well known total potential energy functional by using Frederichs’ transformation. In contrast to flexural buckling analysis of columns, it is shown that when the principle of stationary complementary energy is used, the torsional buckling loads can be underpredicted. A mathematical proof is provided to elucidate this property. The convergence behavior of the approximate solutions is illustrated through numerical examples for several columns with different boundary conditions.     

Improved wear properties of magnesium matrix composite with the addition of fullerene using semi powder metallurgy

The present study aims to fabricate fullerene (C60) reinforced magnesium matrix composite via semi powder metallurgy in hot press system under high purity argon atmosphere. Improvement of wear resistance of pure magnesium with the addition of fullerene is also aimed with this study. Hardness and wear tests at room temperature were performed to investigate the mechanical effect of fullerene nanoparticles. Microstructures of fabricated composites were characterized using Scanning Electron Microscope (SEM). Results clearly show that hardness performance was improved up to 0.5 wt. % fullerene addition directly. A uniform distribution was also achieved according to the mapping and line EDX analysis for the lower content of fullerene. Agglomeration of fullerene was observed for 1 wt. % reinforced composite. Wear performances of pure magnesium were also improved when harder fullerene reinforcements incorporated into the matrix. Abrasion and oxidation were main wear mechanism for unreinforced and fullerene reinforced composites. Enhancement of hardness and wear performances might be attributed to the high specific surface area of fullerene and achievement of uniform distribution of reinforcement in magnesium matrix.     

Synthesis and characterization of whitlockite from sea urchin skeleton and investigation of antibacterial activity

In the present study, undoped whitlockite and ZnO doped-Whitlockite, which is the second most abundant inorganic material in bone structure, were synthesized from sea urchin skeleton. The obtained bioceramic materials were characterized by XRD, FT-IR, and SEM and their antibacterial activities were determined using the inhibition zone diameters of Escherichia coli and Pseudomonas aeruginosa as gram negative bacteria and Staphylococcus aureus as gram positive bacterium after 24 h incubation. The characterization studies showed that nano size homogenous biocereamic whitlockite (Ca_2.86Mg_0.14(PO₄)₂) was synthesized from the sea urchin skeleton. After dopping process, the main structure of the whitlockite keeps stable, showing a dopping concentration-independent character. On the other hand, the peaks belonging to ZnO were started to seen in the XRD pattern with increasing the level of ZnO-concentration (after 7 %). All experimental results point out that the obtained whitlockites are viable nominate candidates for bioceramic materials and the results of antibacterial sensitivity prove the inhibitory effect towards Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus for ZnO-doped-whitlockite.     

Changes in anterior chamber depth and intraocular pressure after phacoemulsification and posterior chamber intraocular lens implantation

BACKGROUND AND OBJECTIVE: To determine anterior chamber depth (ACD) and intraocular pressure (IOP) following uncomplicated cataract extraction with phacoemulsification and posterior chamber intraocular lens (IOL) implantation. PATIENTS AND METHODS: The ACDs and IOPs of 56 patients were prospectively evaluated after phacoemulsification and IOL implantation. Measurements of ACD were performed using ultrasonography and measurements of IOP were performed using a Goldmann applanation tonometer preoperatively and at 1 week and 1, 3, 6, and 9 months postoperatively. RESULTS: The mean IOP had decreased and the mean ACD had increased significantly by 1 month postoperatively (P < .03 and P < .01, respectively). Between 1 and 3 months, a significant increase in ACD (P < .05) and decrease in IOP (P < .01) was also observed. The ACD peaked (3.51 +/- 0.45 mm) and the IOP reached its lowest value (10.05 +/- 2.23 mm Hg) at 3 months postoperatively. The reduction in IOP and increase in ACD remained significant during the follow-up period, compared with the preoperative values. CONCLUSION: These results suggest that increases in ACD and decreases in IOP occur in selected patients after uncomplicated cataract extraction by phacoemulsification with IOL implantation.     

Optimization Model for Aggregate Blending

An optimization model of aggregate blending is presented that considers gradation, cost, and design requirements and is applicable to the blending of any number of aggregates. The model is formulated as a quadratic programming problem that minimizes the mean deviation from midpoint specification limits, subject to constraints on the preceding requirements. The model is applied to a numerical aggregate blending problem. Sensitivity analysis is performed to show how the model can also be used to minimize cost or to provide a trade‐off between mean deviation and cost. Extensions of the model to accommodate special practical cases are examined.     

Process synthesis using block superstructure with automated flowsheet generation and optimization

An alternative method for chemical process synthesis using a block‐based superstructure representation is proposed. The block‐based superstructure is a collection of blocks arranged in a two‐dimensional grid. The assignment of different equipment on blocks and the determination of their connectivity are performed using a mixed‐integer nonlinear formulation for automated flowsheet generation and optimization‐based process synthesis. Based on the special structure of the block representation, an efficient strategy is proposed to generate and successively refine feasible and optimized process flowsheets. Our approach is demonstrated using two process synthesis case studies adapted from the literature and one new process synthesis problem for methanol production from biogas © 2018 American Institute of Chemical Engineers AIChE J, 64: 3082–3100, 2018