Diffusible hydrogen management in underwater wet self-shielded flux cored arc welding

This article reports the effect of underwater wet welding parameters and conditions on the diffusible hydrogen content in deposited metal for welding with a self-shielded flux cored wire. The diffusible hydrogen content in deposited metal was determined using the glycerin method according to the Plackett-Burman design determining the significance of the effect of the stick out length, welding current, arc voltage, travel speed and water salinity. The results of the measurements of the diffusible hydrogen content in deposited metal ranged from 25.85 to 44.12 ml/100 g. The effect of all the tested factors is statistically significant. An equation was also developed, the analysis of which showed, that the hydrogen content cannot be reduced by technological methods below 21 ml/100 g.     

The Role of Microstructure Morphology on Fracture Mechanisms of Continuously Cooled Bainitic Steel Designed for Rails Application

Metallurgical and Materials Transactions A - The low-carbon bainitic steel after a continuous cooling process was subjected to fracture toughness investigations using the J-integral approach. The...     

Evaluation of Damage Degree of Inconel 718 Alloy with the Use of Non-Destructive Methods

The article presents results of the investigation of the quantitative evaluation of the degree of damage, described by the measure of accumulated plastic strain obtained in a static tensile test, using selected non-destructive techniques. Inconel 718 alloy was tested. The tests were conducted using a new type of specimens of variable cross-sectional area of measuring part. This provided a continuous distribution of plastic strain in the gage part of the specimen. The permanent deformation that varies along the sample axis enables an analysis of damage induced by a plastic deformation. The proposed method enables replacing the series of specimens by one sample. Degradation of the alloy corresponds with the changes of the electromagnetic properties of the material—the phase angle of the complex impedance of the eddy current, as well as with acoustics properties of material—acoustic birefringence of ultrasonic waves. It allows to determine the degree of damage of the material using noninvasive, non-destructive methods. Using the damage parameter proposed by Johnson it is possible to obtain the correlation between the non-destructive results and a damage degree of the material. The presented testing method delivers information about changes in the material structure caused by permanent deformation.

     

Carbon materials modified by plasma treatment as electrodes for supercapacitors

The carbon material was modified by RF plasma with various reactive gases: O₂, Ar and CO₂. Physicochemical properties of the final carbon products were characterized using different techniques such as gas adsorption method and XPS. Plasma modified materials enriched in oxygen functionalities were investigated as electrodes for supercapacitors in acidic medium. The electrochemical measurements have been carried out using cyclic voltammetry, galvanostatic charge/discharge and impedance spectroscopy. The electrochemical measurements have confirmed that capacity characteristics are closely connected with a type of plasma exposition. Modification processes have an influence on the kind and amount of surface functional groups in the carbon matrix. The moderate increase of capacity of carbon materials modified by plasma has been observed using symmetric two-electrode systems. Whereas investigations made in three-electrode system proved that the suitable selection of plasma modification parameters allows to obtain promising negative and positive electrode materials for supercapacitor application.     

Fabrication of nanoporous TiO2 by electrochemical anodization

The formation of self-organized porous titania is achieved by electrochemical anodization under a potentiostatic regime. Anodic titanium oxide (ATO) was fabricated by a three-step self-organized anodization of the Ti foil in an ethylene glycol electrolyte containing 0.38 wt% of NH₄F and 1.79 wt% of H₂O. Anodizing was carried out at the constant cell potential ranging from 30 to 70 V at the temperature of 20 °C. It was found that nanoporous TiO₂ arrays can be obtain only after a short duration of the third step (10 min). The influence of anodizing potential on the structural parameters of porous anodic titania including pore diameter, interpore distance, wall thickness, porosity and pore density was extensively studied. The linear dependencies between interpore distance, pore diameter and wall thickness upon the anodizing potential were found. The regularity of pore arrangement was monitored qualitatively by fast Fourier transforms (FFTs) of top-view FE-SEM images. It was found that the best arrangement of nanopores is observed at 40 V. This finding was confirmed by the analysis of pore circularity. The highest circularity of pores was observed once again at 40 V.     

The Particle Image Velocimetry Experimental Study of Flame Extinction in Standard Square Flammability Column Resulting From Stretching

The main goal of this work is to determine experimentally local stretching rate distribution along the limits of methane/air and propane/air flames, using particle image velocimetry (PIV). This method allows obtaining necessary moving flame velocity fields in a standard flammability column and also recognition of the flame structures. For this purpose each mixture was seeded with MgO particles (of known size) before entering the tube (column), using a special system. The amount of seeds in the mixture, their dispersion system, and the laser power producing a sheet of light penetrating the column were carefully chosen (so as not to disrupt the combustion or flame propagation in it). After a learning process, this finally it allowed us obtain good-quality velocity field images in the region of concern, images acceptable for further processing. The methodology developed for these experiments proved to be reliable and able to supply analyses with repeatable data. On the basis of performed experiments it was possible to derive the flame stretching rate that causes its extinction in both mixtures.     

Conversion of a Mono‐ and Diacylglycerol Lipase into a Triacylglycerol Lipase by Protein Engineering

Despite the fact that most lipases are believed to be active against triacylglycerides, there is a small group of lipases that are active only on mono‐ and diacylglycerides. The reason for this difference in substrate scope is not clear. We tried to identify the reasons for this in the lipase from Malassezia globosa. By protein engineering, and with only one mutation, we managed to convert this enzyme into a typical triacylglycerol lipase (the wild‐type lipase does not accept triacylglycerides). The variant Q282L accepts a broad spectrum of triacylglycerides, although the catalytic behavior is altered to some extent. From in silico analysis it seems that specific hydrophobic interactions are key to the altered substrate specificity.     

Experimental and numerical studies on chemically reacting gas flow in the porous structure of a solid oxide fuel cells internal fuel reformer

This paper presents experimental and numerical studies on the fuel reforming process on an Ni/YSZ catalyst. Nickel is widely known as a catalyst material for Solid Oxide Fuel Cells. Because of its prices and catalytic properties, Ni is used in both electrodes and internal reforming reactors. To optimize the reforming reactors, detailed data about the entire reforming process is required. In the present paper kinetics of methane/steam reforming on the Ni/YSZ catalyst was experimentally investigated. Measurements including different thermal boundary conditions, the fuel flow rate and the steam-to-methane ratios were performed. The reforming rate equation derived from experimental data was used in the numerical model to predict synthetic gas composition at the outlet of the reformer.