Plastic ball grid array (PBGA) overview

As integrated circuit functionality and clock speed continue to rise, innovative packaging approaches are in great demand. Recently, the plastic ball grid array (PBGA) technology has been gaining industry-wide interest and commitment as the potentially lowest-cost package for high-I/O devices and even for some lower-pincount applications. Drivers include the density advantages of an area array, quickly achieving six-sigma assembly yields with existing assembly equipment, the potential for excellent electrical and thermal performance, along with the traditional low cost of plastic packages. Because some perceived weaknesses are being eradicated, worldwide evaluation of the PBGA has accelerated. Although various aspects of this technology are discussed frequently, an overall assessment is still under development. In this paper, a systematic and comprehensive evaluation of PBGA technology will be described to identify (1) its technical advantages and limitations, (2) unique application areas where PBGA is the package of choice, and (3) current major hurdles for acceptance of PBGA and possible approaches to overcome these problems. The PBGA will be compared with PQFP, CQFP and CBGA in terms of package characteristics and their impact on system assembly. The characteristics include package attributes (i.e., package size, I/O counts and lead pitch), performance (i.e., electrical, thermal) and reliability (moisture). At the system level, solder joint fatigue, board routing, solder assembly yield, solder reparability and board delay are key metrics. The cost implication of various package families will be discussed. By analogy with SMT, the infrastructure for PBGA will take time to develop. The key elements and the current status of this infrastructure will be discussed.     

Importance of biotic interactions in large rivers: an experiment with planktivorous fish,dreissenid mussels and zooplankton in the St. Lawrence River

Physical conditions are usually considered pre‐eminent in controlling river plankton, but biotic interactions may be important in slackwater areas. To begin testing this general hypothesis, we conducted a 12‐day, predator–prey experiment in 3500 litre mesh enclosures in a slackwater area of the St. Lawrence River using planktivorous, juvenile yellow perch (Perca flavescens) and Dreissena mussels. Results generally supported our hypotheses that: (1) perch would directly suppress large zooplankton via predation but benefit microzooplankton through indirect interactions; and (2) dreissenids would directly depress rotifer densities via predation and have indirect negative effects on macrozooplankton. Based on gut contents of experimental fish, cladocera were the principal prey of smaller yellow perch (c. 46–50 mm), followed by copepods, ostracods, and rotifers. Larger juvenile perch (c. 67–73 mm) fed almost exclusively on copepods and ostracods. Densities of calanoid copepodids, nauplii, and some cyclopoid copepods (Diacyclops thomasi) were significantly depressed by perch, and adult Eurytemora affinis (99% of adult calanoids) essentially disappeared from fish enclosures. Despite being a favourite prey item of small perch, densities of the small cladoceran Bosmina (Sinobosmina) spp. were significantly higher when fish were present (150% greater than control densities on Day 12). Densities of the very abundant rotifer Polyarthra were >300% greater in fish enclosures than controls by Day 12, and the rotifers Synchaeta and predaceous Ploesoma were significantly more abundant in the presence of perch. Increases in rotifers and cladocera suggest indirect, positive effects of fish related to significantly higher phytoplankton biomass or decreased densities of predaceous copepods. Densities of eight of ten zooplankton groups examined declined significantly when mussels were present, and calanoid copepodids also declined but not significantly. Chlorophyll‐a concentrations were slightly lower in mussel enclosures. This evidence suggests biotic interactions play important roles among potamoplankton in slackwater habitats, but river‐wide implications of these findings require further study. Copyright © 2003 John Wiley & Sons, Ltd.     

Automatic laser shutdown implications for all optical data networks

Generalized multiprotocol label switching (GMPLS), optical packet, and burst-switched networks in which the synchronous digital hierarchy/synchronous optical network (SDH/SONET) layer is removed may be rendered nonfunctional because the current standard for triggering Automatic Power Reduction (APR) cannot distinguish between a fiber that has been de-energized and a fiber failure. If this standard is applied, without modification, the likelihood of unnecessary amplifier shutdown in optical networks is significant. These shutdown events may impact large regions of the network and render optical links inoperable. To avoid unnecessary amplifier shutdown, amendments to the current operation of APR are suggested.     

Homocysteine and cognitive impairment; a case series in a General Practice setting

Background  

An elevated blood level of homocysteine is a risk factor for cognitive impairment and dementia. Homocysteine can be lowered by folate and/or vitamin B₁₂ supplementation; antioxidants might also be required for optimal reduction in neurovascular tissue. This report presents clinical and radiological findings from administering the antioxidant N-acetylcysteine together with B vitamins to cognitively impaired patients with hyperhomocysteinaemia.     

Quantitation of Ink Transferred During Pharmaceutical Printing Operations Using Inductively Coupled Plasma Atomic Emission Spectroscopy

The identification of solid dosage forms is often achieved through printing with a non-toxic ink. Due to product purity requirements, a method to quantify the amount of ink applied to tablets and capsules is of interest to the pharmaceutical industry.

The following presentation investigated the use of inductively coupled plasma atomic emission spectroscopy (ICP-AES) as a direct method of quantifying the amount of ink on a tablet. Because the ink used contained an iron oxide pigment of known composition, quantitation of the iron content could be used to measure the amount of ink transferred to the tablet.

The quantitative results obtained using ICP-AES were in agreement with calculated values for the volume of ink in the gravure roll. Tablets exposed to “double printing” were easily detected by the ICP-AES method.     

Biogeochemical Evaluation of Mechanisms Controlling CaCO3(s) Precipitation in Landfill Leachate-Collection Systems

A common failure mode for landfills is clogging of the leachate-collection system. The reduction in hydraulic conductivity associated with clogging causes a buildup of leachate head on the underlying liner, potentially increasing advective contaminant transport from the landfill and contaminating adjacent groundwater. In this paper, the biogeochemical model CCBATCH is used to link a primary cause of leachate collection system failure—CaCO3(s) precipitation?to anaerobic degradation of volatile fatty acids (VFAs) in column reactors used to study the clogging phenomena. One key to applying CCBATCH correctly was dividing the VFA conversion into two steps: conversion of propionate to acetate, carbonic acid, and methane; and acetate conversion to methane and carbonic acid. The primary driver for CaCO3(s) precipitation in the columns was acetate fermentation to CH4 and H2CO3, which increased the total carbonate concentration in the leachate and shifted the acid/base control to a weaker acid system, which caused an increase in solution pH. A second key to proper modeling was adding CO2(g) gas transfer to CCBATCH. The modeling results indicate that the kinetics of CO2(g) gas transfer was a key control over leachate chemistry once acetate fermentation was nearly complete. These results suggest that the best approach for the long-term control of CaCO3(s) clogging may be to enhance CO2(g) gas transfer from the leachate while buffering the leachate pH to near neutral. Taken together, these actions should decrease the yield of CaCO3(s) precipitated per mass of acetate removed.     

Applying the two-state invar model to delta-phase plutonium

This article describes the authors’ use of the Weiss two-state model for Fe-Ni invar alloys to understand the anomalous thermal expansion of Pu-Ga alloys. Studies on thermal expansion of Pu-Ga are reviewed briefly, and the two-state invar model is described. The authors fit the available neutron-diffraction data for Pu-Ga alloys to the invar model and discuss the consequences. For more information, contact Andrew C. Lawson, Structure and Properties Group: MST-8, MS H-805, Los Alamos National Laboratory, Los Alamos, New Mexico 87545; (505) 667-8844; fax (505) 665-2676; e-mail lawson@lanl.gov.     

Construal processes and trait ambiguity: Implications for self-peer agreement in personality judgment.

The relationship between trait ambiguity and self–peer agreement in personality judgment was examined. In Study 1, self–peer agreement was lower on ambiguous traits (those with many behavioral referents) than on unambiguous ones (those with few behavioral referents). This finding was partially moderated by the level of friendship between peers. These results suggest that people disagree in their judgments because they use idiosyncratic trait definitions when making judgments on ambiguous traits. Study 2 tested this explanation by exploring self–peer agreement when participant pairs were forced to use the same trait definition versus different ones when judging themselves and each other. Forcing participants to use the same trait definition increased the degree to which their judgments covaried with one another. Discussion centers on the cognitive and motivational forces that can influence the degree to which personality judgments differ. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Specificity grafting of human antibody frameworks selected from a phage display library: generation of a highly stable humanized anti-CD22 single-chain Fv fragment

A prerequisite for the enrichment of antibodies screened fromphage display libraries is their stable expression on a phageduring multiple selection rounds. Thus, if stringent panningprocedures are employed, selection is simultaneously drivenby antigen affinity, stability and solubility. To take advantageof robust pre-selected scaffolds of such molecules, we graftedsingle-chain Fv (scFv) antibodies, previously isolated froma human phage display library after multiple rounds of in vitropanning on tumor cells, with the specificity of the clinicallyestablished murine monoclonal anti-CD22 antibody RFB4. We showthat a panel of grafted scFvs retained the specificity of themurine monoclonal antibody, bound to the target antigen withhigh affinity (6.4–9.6 nM), and exhibited exceptionalbiophysical stability with retention of 89–93% of theinitial binding activity after 6 days of incubation in humanserum at 37°C. Selection of stable human scaffolds withhigh sequence identity to both the human germline and the rodentframeworks required only a small number of murine residues tobe retained within the human frameworks in order to maintainthe structural integrity of the antigen binding site. We expectthis approach may be applicable for the rapid generation ofhighly stable humanized antibodies with low immunogenic potential. Received June 10, 2003; accepted August 27, 2003.