对流域水电建设档案科学管理的研究

介绍清江公司从流域水电建设的特点出发,研究流域水电建设工程档案的完整性、准确性,确保工程质量,提高工程管理水平,将大量的档案信息资源转化为科学知识,为流域水电开发服务,取得显著的经济和社会效益的情况。     

换热管的程序自动计数方法

介绍了一种用Autolisp语言编制的程序、对换热器管束数目进行准确计数的方法。     

CDMA通信系统的MATLAB仿真

在简要介绍MATLAB语言的基础上，对使用MATLAB语方仿真的CDMA通信系统进行描述。     

WLAN的安全性设计

本文分析了WLAN中存在的安全问题，并提出了相应的解决策略，对于WLAN的设计具有较高的参考价值。     

FUZZY控制规则的自生成及其自校正方法

本文研究了:1)以被控对象规则模型为依据自动生成Fuzzy控制器规则的新方法;2) 其相应的自校正Fuzzy控制方法.最后以一实验室电加热炉温控实例说明它们的可行性和 有效性.     

催化裂化汽油选择性加氢脱硫催化剂RSDS-1的开发

介绍了用于催化裂化汽油选择性加氢脱硫催化剂RSDS-1的研究开发，考察了载体、活性组元、金属原子比以及助剂对催化剂选择性的影响。研究结果表明，催化裂化汽油中烯烃的加氢饱和受扩散限制；Co—Mo组合对烯烃饱和的能力相对较弱；较高的Co／Mo原子比有利于提高催化剂选择性；助剂的加入对催化剂选择性有明显的影响；RSDS—1催化剂用于催化裂化汽油选择性脱硫，对不同原料油适应性好，脱硫率可达80％，RON损失小于2个单位，且可长周期稳定运转。     

热平衡流量计研究与应用

依据热平衡方法测流量原理研制的热平衡流量计没有任何可动部件，可靠性大大加强，可以代替常用的浮子流量计和涡轮流量计。该仪器的应用为油水井及注聚合物井的流量测试提供了更为有效的手段和方法。     

On structural and high temperature electrochemical properties of ZrO2 thin film coating on Zr metal produced by carbonate melt

Melt of NaCO₃ can favor oxidation of Zr to form ZrO₂ thin film on Zr surface, which is used to make Zr/ZrO₂ oxidation/reduction electrode of pH sensor for testing elevated temperature aqueous solutions. Using SEM, EPMA, XPS, EXAFS and HRTEM, we found that ZrO₂ film is tightness and solid with 20 μm thickness composed by nanometer-sized monoclinic crystals. Zr/ZrO₂ interface is characterized of zoning structure according to topography and chemical composition in five zones: oxygen-rich ZrO₂, ZrO₂, oxygen-rich Zr metal, oxygen-bearing Zr and Zr from outmost to center. Melt oxidation process of Zr involved oxidation time, air and temperature. The air is important effect on structural and electrochemical properties of ZrO₂ thin film for making elevate temperature electrochemical sensor. If oxygen air largely presented in carbonate melting process, ZrO₂ thin film is not tightness and not for oxidation/reduction electrode.     

用纳米棒ZnO作模板生长无支撑的AlN纳米晶

用金属有机物气相外延在纳米棒ZnO模板上沉积AlN薄膜.SEM测试表明该薄膜形成了一种倾倒纳米棒的表面.而GIXRD测试进一步证实它是纤锌矿结构的AlN,晶粒尺度约为12nm,接近于ZnO纳米棒的直径(30nm).这意味着纳米棒结构的ZnO能限制AlN的横向生长.此外,高温下用H2刻蚀ZnO直接在生长中实现了外延层的剥离.最终得到了无支撑的AlN纳米晶,完整无破损的区域约为1cm×1cm.定义这个生长机制为"生长-刻蚀-合并"过程.     

A new colloidal precursor cooperative conversion route to nanocrystalline quaternary copper sulfide

A novel milk-like Cu-thiourea colloid has been synthesized. Nanocrystalline quaternary copper sulfide Cu₂FeSnS₄ was obtained through the Cu-thiourea colloidal precursor cooperative conversion route at low temperature. The samples were characterized by means of X-ray powder diffraction, transmission electron microscopy, scanning electron microscopy, inductively coupled plasma atomic emission spectroscopy, and X-ray energy dispersive spectroscopy techniques. The reaction details and features were described and discussed.