A Cyclometalated Iridium (III) Complex as a Microtubule Probe for Correlative Super-Resolution Fluorescence and Electron Microscopy

The visualization of microtubules by combining optical and electron microscopy techniques provides valuable information to understand correlated intracellular activities. However, the lack of appropriate probes to bridge both microscopic resolutions restricts the areas and structures that can be comprehended within such highly assembled structures. Here, a versatile cyclometalated iridium (III) complex is designed that achieves synchronous fluorescence–electron microscopy correlation. The selective insertion of the probe into a microtubule triggers remarkable fluorescence enhancement and promising electron contrast. The long-life, highly photostable probe allows live-cell super-resolution imaging of tubulin localization and motion with a resolution of ≈30 nm. Furthermore, correlative light–electron microscopy and energy-filtered transmission electron microscopy reveal the well-associated optical and electron signal at a high specificity, with an interspace of ≈41 Å of microtubule monomer in cells.     

Parallel Aluminum-Cobalt Oxide Nanosheet Arrays with High-Temperature Ferromagnetism

Parallel nanomaterials possess unique properties and show potential applications in industry. Whereas, vertically aligned 2D nanomaterials have plane orientations that are generally chaotic. Simultaneous control of their growth direction and spatial orientation for parallel nanosheets remains a big challenge. Here, a facile preparation of vertically aligned parallel nanosheet arrays of aluminum-cobalt oxide is reported via a collaborative dealloying and hydrothermal method. The parallel growth of nanosheets is attributed to the lattice-matching among the nanosheets, the buffer layer, and the substrate, which is verified by a careful transmission electron microscopy study. Furthermore, the aluminum-cobalt oxide nanosheets exhibit high-temperature ferromagnetism with a 919 K Curie temperature and a 5.22 emu g⁻¹ saturation magnetization at 300 K, implying the potential applications in high-temperature ferromagnetic fields.     

Male sex pheromone of cockroachEurycotis floridana (walker) (Blattidae,Polyzosteriinae): Role and composition of tergites 2 and 8 secretions

InEurycotis floridana, the male calling behavior is associated with the exposition of epidermal glands located under tergites 2, 7, and 8. 4-Hydroxy-5-methyl-3(2H)-furanone and 4-hydroxy-2,5-dimethyl-3(2H)-furanone were recently identified as the specific components of tergite 7 secretion. Methylene chloride extracts of tergite 7 and its major compound 4-hydroxy-5-methyl-3(2H)-furanone attract the conspecific females at a distance. Methylene chloride extracts of tergite 8 are also attractive at a distance to the females, whereas extracts of tergite 2 had no effect on males and females. Our GC investigations showed the absence of specific compounds in tergite 2 secretions. The GC-MS analyses revealed that the male secretion of the gland under tergite 8 is mainly a mixture of (2R*, 3R*)-butanediol, 1-dodecanol and benzyl 2-hydroxybenzoate. These compounds were tested at different concentrations on their own, or as a mixture. Only (2R*, 3R*)-butanediol and 1-dodecanol were attractive for the females. Their functions, as components of the male sex pheromone, in addition with the two derivatives of the furanone are discussed.     

Estimation of heat fluxes during high-speed drilling

Heat fluxes on each cutting edge of a carbide double cutting drill are estimated during a high-speed machining process from temperature measurements in the drill tool and a direct model that has been established using the non integer system identification approach. A single experiment is required in order to characterize the transient thermal behavior of the tool. The non integer system identification method is based on the recursive linear least square algorithm. The inverse method is based on the constant function specification approach. Results obtained during machining lead to predict the tool wear and possible tool positioning defect.     

Tribological duality of Ti<Subscript>3</Subscript>SiC<Subscript>2</Subscript>

We report here on the friction behavior of fine- and coarse-grained Ti₃SiC₂ against steel and Si₃N₄ balls. Two successive friction regimes have been identified for both grain sizes and both counterparts. First, Type I regime is characterized by a relatively low (0.1–0.15) friction coefficient, and very little wear. Sliding occurs between a tribofilm on the ball and the Ti₃SiC₂ plane when against steel. Then, a Type II regime often follows, with increased friction coefficients (0.4–0.5) and significant wear. Compacted wear debris seems to act as a third body resulting in abrasion of the ball, even in the case of Si₃N₄. The transition between the two regimes occurs at different times, depending on various factors such as grain size, type of pin, and normal load applied. Some experiments under vacuum showed that the atmosphere plays also a major role. The reason for this evolution is not fully clear at that time, but its understanding is of major technological importance given the unusual good properties of this material.     

Evaluation of drainage system around a lined pilot cavern for underground cryogenic LNG storage

A lined pilot cavern for underground cryogenic LNG (liquefied natural gas) storage was constructed in granite in Daejeon, Korea in 2003 and commissioned in 2004. As the hydrostatic pressure of groundwater and thermal stress due to the formation of ice lenses may damage the containment system, rock drainage around the pilot cavern is needed to maintain the stability of the containment system. Once the drainage works were completed, the level of groundwater around the pilot cavern was controlled using drainage holes to form an ice ring as a second barrier to prevent the leakage of LNG from the cavern. In order to establish the drainage system for the pilot cavern, 15 boreholes were drilled into the rock. Fractures in the rock mass around the pilot cavern were characterized to determine the most appropriate orientation for the drainage holes. The major joints acting as conduits for inflow water were designed for efficient drainage. After the 15 drainage holes were drilled and their efficiency tested during the dry season in April 2003, it was found that there was a problem with the inflow of water through the main joint along the right-hand wall of the cavern, indicating the system was less efficient on the right-hand side. Hence, three more boreholes were drilled in the correct direction on the right-hand wall of the cavern. A second drainage test was conducted during the rainy season in August. This showed some seepage into the bottom of the pilot cavern. In order to reduce this seepage, two more additional drainage holes were drilled and grouted below the concrete invert. Although the drainage system was very efficient, weak points in the system were found by testing and changes were made to the system to improve its efficiency.     

Analysis of bacterial diversity in river biofilms using 16S rDNA PCR-DGGE: methodological settings and fingerprints interpretation

Reliability of bacterial diversity assessment using polymerase chain reaction (PCR) denaturing gradient gel electrophoresis (DGGE) analysis of 16S rDNA fragments was evaluated for a particular complex microbial assemblage: river epilithic biofilm. By comparing 3 routine protocols on replicates of one river biofilm sample, we found that common DNA extraction procedures gave comparable diversity (from 28.0 to 30.7 bands detected) and community composition (> 75% of homology) despite differences in the total amount of extracted DNA (from 0.9 to 4.2 microg). Therefore methodological improvements only concerned electrophoretic separation of DNA fragments (range of denaturing gradient from 35% to 70% and migration time=18h) and standardisation of DNA amounts used (PCR-template=50 ng, gel loading=700 ng). Using such a standardised methodology we found a good reproducibility of all steps of the procedure. When an Escherichia coli strain was introduced as a contaminant in a biofilm sample, we were able to recover ribotypes from the strain. As concerns fields sampling, a satisfactory repeatability of banding patterns from neighbouring pebbles (sampling point) allowed discriminating between the biofilm intrasite variability (various points from a cross-profile). These trials confirmed that PCR-DGGE is suitable to assess a reliable genetic fingerprint of epilithic biofilms in the river. Phylogenetic analysis of 40 partial sequences of 16S rDNA from DGGE gels of two sets of river biofilms samples proved evidences for the retrieval of DNA fragments related to phototroph Eukarya. However, in both cases plastidial 16S rDNA represented less than 25% of the analysed operational taxonomic units. Taking into account that Cyanobacteria, as members of the Bacteria, were also detected, sequence analysis of relevant bands from the pattern is required to target "bacteria", i.e. the functional group of prokaryotic microorganisms to which one commonly refers as a key component in sustaining the nutrient turnover.     

Control of gold surface diffusion on si nanowires

Silicon nanowires (NW) were grown by the vapor-liquid-solid mechanism using gold as the catalyst and silane as the precursor. Gold from the catalyst particle can diffuse over the wire sidewalls, resulting in gold clusters decorating the wire sidewalls. The presence or absence of gold clusters was observed either by high angle annular darkfield scanning transmission electron microscopy images or by scanning electron microscopy. We find that the gold surface diffusion can be controlled by two growth parameters, the silane partial pressure and the growth temperature, and that the wire diameter also affects gold diffusion. Gold clusters are not present on the NW side walls for high silane partial pressure, low temperature, and small NW diameters. The absence or presence of gold on the NW sidewall has an effect on the sidewall morphology. Different models are qualitatively discussed. The main physical effect governing gold diffusion seems to be the adsorption of silane on the NW sidewalls.     

Empirical Likelihood for Outlier Detection and Estimation in Autoregressive Time Series

Identification and estimation of outliers in time series is proposed by using empirical likelihood methods. Theory and applications are developed for stationary autoregressive models with outliers distinguished in the usual additive and innovation types. Some other useful outlier types are considered as well. A simulation experiment is used for studying the behaviour of the empirical likelihood‐based method in finite samples and indicates that the proposed methods are preferable when dealing with the non‐Gaussian data. Our simulations suggest that the usual sequential procedure for multiple outlier detection is suitable also for the methods based on empirical likelihood.     

Particle sizing with a fast polar nephelometer

We reported previously the design of a polar nephelometer that uses a rotational confocal imaging setup to enable fast scanning of the scattering phase function within a field of view of 55 degrees . The full dynamic range of the detection system can be used by increasing the signal-to-noise ratio by means of averaging successive scans. The calibration of the angular response of the instrument is achieved by obtaining the transfer function of the optical detection system using Rayleigh scatterers. Accurate particle sizing of individual polystyrene spheres (ranging from 1.5 to 9 micro m in diameter) in aqueous suspension is achieved by maximizing a correlation coefficient between precalculated tables of Mie phase functions and data obtained from the polar nephelometer. Good correlation is achieved between experimental and theoretical data, proving the functioning of the instrument as a fast and convenient particle sizer.