Chaos in parametric resonance flow at water-mercury interface

In the electrochemical system with liquid-liquid interface, intense local convections by the resonance with potential pulses take place. Therefore, with laser beam scattering, temporal movement of the water-mercury interface was observed. As a result, the scattering efficiency showed non-linear oscillation.

Such non-linear response could be controlled by potential pulse height. As the potential height was increased, new scattering peaks in the oscillation emerged, which was expected of a kind of bifurcation phenomenon. From these results, phase portrait, Poincarè section, correlation dimension of the strange attractor and the largest Lyapunov exponent of the trajectories were obtained. Consequently, it was concluded that all the parameters indicate chaotic behavior of the resonance flow.     

Cationic copolymerization behavior of a bicyclic orthoester having hydroxy group with glycidyl phenyl ether and volume change on their copolymerization

This article describes cationic ring‐opening copolymerization of a bicyclic orthoester having hydroxy group (BOE‐OH) and glycidyl phenyl ether (GPE), and the volume shrinkage behavior during the copolymerization. THF soluble polyethers [poly(BOE‐OH‐co‐GPE)] were obtained by the copolymerizations at 80–180°C, while crosslinked poly(BOE‐OH‐co‐GPE) was obtained by the copolymerizations at 220–250°C. This crosslinking reaction may originate from the dehydration of methylol groups in the side chain of poly(BOE‐OH‐co‐GPE). The volume shrinkage during the cationic copolymerization reduced as the increase of the BOE‐OH feed ratio. By contrast, the volume shrinkage on the crosslinking polymerization was almost independent on the BOE‐OH feed ratio. Poly(BOE‐OH‐co‐GPE)s with higher BOE‐OH composition showed lower thermal weight loss temperature owing to the release of H₂O by dehydration of methylol groups. The BOE‐OH component in the THF soluble poly(BOE‐OH‐co‐GPE)s lowered the glass transition temperature (T_g), while that in the crosslinked poly(BOE‐OH‐co‐GPE) increased the T_g probably because of the higher crosslinking density. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1356–1361, 2006     

The Failure of the Strong Pumping Lemma for Multiple Context-Free Languages

Seki et al. (Theor. Comput. Sci. 88(2):191–229, 1991) showed that every m-multiple context-free language L is weakly 2m-iterative in the sense that either L is finite or L contains a subset of the form \(\{ u_{0} w_{1}^{i} u_{1} \cdots w_{2m}^{i} u_{2m} \mid i \in \mathbb {N}\}\) , where w ₁?w _2n ≠ε. Whether every m-multiple context-free language L is 2m-iterative, that is to say, whether all but finitely many elements z of L can be written as z=u ₀ w ₁ u ₁?w _2m u _2m with w ₁?w _2m ≠ε and \(\{ u_{0} w_{1}^{i} u_{1} \cdots w_{2m}^{i} u_{2m} \mid i \in \mathbb {N}\} \subseteq L\) , has been open. We show that there is a 3-multiple context-free language that is not k-iterative for any k.     

Balanced corpus of contemporary written Japanese

The balanced corpus of contemporary written Japanese (BCCWJ) is Japan’s first 100 million words balanced corpus. It consists of three subcorpora (publication subcorpus, library subcorpus, and special-purpose subcorpus) and covers a wide range of text registers including books in general, magazines, newspapers, governmental white papers, best-selling books, an internet bulletin-board, a blog, school textbooks, minutes of the national diet, publicity newsletters of local governments, laws, and poetry verses. A random sampling technique is utilized whenever possible in order to maximize the representativeness of the corpus. The corpus is annotated in terms of dual POS analysis, document structure, and bibliographical information. The BCCWJ is currently accessible in three different ways including Chunagon a web-based interface to the dual POS analysis data. Lastly, results of some pilot evaluation of the corpus with respect to the textual diversity are reported. The analyses include POS distribution, word-class distribution, entropy of orthography, sentence length, and variation of the adjective predicate. High textual diversity is observed in all these analyses.     

Lysozyme requires fluctuation of the active site for the manifestation of activity

Mutations around His15 which lie far away from the active site,stimulated glycol chitin activity of lysozyme at physiologicaltemperature. Del-Argl4Hisl5 lysozyme, a mutant lysozyme whoseArgl4 and Hisl5 were deleted together, and has the highest activityamong these mutant lysozymes, had a similar binding abilityto a trimer of N-acetyl-glucosamine, a substrate analogue, relativeto native lysozyme. This suggests that the increased activitywas due to an increased k_cat in the catalysis reaction. TheH-D exchange rate of the N-1 proton in the Trp63 which is locatedin the active site cleft, was enhanced in the Del-Argl4Hisl5lysozyme, while 2-D proton NMR analysis revealed no conformationalchange around Trp63. We conclude that some sort of fluctuationat the active site might be required for the manifestation ofactivity. This theory is supported by the finding that the Del-Argl4Hisl5lysozyme showed a shift in temperature dependency of activityto lower temperatures compared with that of native lysozyme.     

Environmentally friendly coloured materials: cellulose/titanium dioxide/inorganic pigment composite spherical microbeads prepared by viscose phase-separation method

In order to develop environmentally friendly coloured materials, cellulose composite spherical microbeads hybridised with titanium dioxide (TiO₂) particles and inorganic pigment were prepared by a phase-separation method using viscose and an aqueous solution containing sodium polyacrylate. Findings regarding the relationships between cellulose xanthate and the electronic characteristics of TiO₂ particles used in the cellulose/inorganic material composite sphering process are also reported. These findings suggest that the location of TiO₂ particles in cellulose microbeads is related to electrical repulsion between the xanthate (CSS⁻) group and TiO₂. The use of TiO₂ powder as colour pigment is limited, as its colour is white. The cellulose composite spherical microbeads covered with TiO₂ and Fe₂O₃ particles were developed by addition of iron oxide (Fe₂O₃). Their surfaces were viewed by laser microscope and using SEM images. These composite microbeads retained the photocatalytic property of TiO₂. Cellulose/TiO₂/Fe₂O₃ composite spherical microbeads with both colour function and photocatalytic properties were successfully prepared.     

Copper ⇌ Alkali Ion Exchange of Alkali Aluminosillcate Glasses in Copper-Containing Molten Salt: I, Monovalent Copper Salt, CuCl

Cu⁺⇌ R⁺ (R = Li, Na, and K) ion exchange experiments were conducted for 20R₂O·10Al₂O₃·70SiO₂ glasses in molten CuCl at 550°C in air and nitrogen atmospheres. The depth profiles of the copper incorporated into glasses were determined with an electron microprobe X-ray analyzer. The total amount of diffusing copper, M _t, strongly depended on the type of alkali ion in the glass and the ion-exchange atmosphere; i.e., M _t increased with increasing cationic size in the order Li < Na < K and M _t was greater in air than in nitrogen. The Cu ⇌ R⁺ ion exchange kinetics are discussed in detail.     

Relative reactivity of hydrogen donor solvent in coal liquefaction

Hydrogen transfer from donor solvent to coal must involve reactions such as hydrogen donation to free radicals and hydrogenation of aromatic structures. The relative reactivities of five typical hydrogen donor solvents, more reactive than tetralin, were determined using a competing elimination reaction in the liquefaction of a bituminous coal at 400 °C and a brown coal at 350 °C. 9,10-Dihydroanthracene, 9,10-dihydrophenanthrene and 1,2,3,4-tetrahydroquinoline exhibited outstanding hydrogen donating ability. Further, the relative reactivities of five mild hydrogen donor solvents such as acenaphthene and indan were determined by a similar elimination reaction using a bituminous coal at 450 °C.     

Electroless copper plating using Fe as a reducing agent

Although the electroless plating method is known to be an effective method for obtaining fine wiring in particular, 1 mol hydrogen gas is generated during 1 mol Cu deposition, and voids are generated in the wiring when electroless Cu plating is applied to fine wiring. To avoid the hydrogen evolution, the possibility of performing electroless Cu plating was confirmed using an inexpensive Fe^II compound as a reducing agent. The bath contains CuSO₄, FeSO₄, NaCl, ethylenediamine, sodium citrate, polyethylene glycol (PEG), and 2,2′-bipyridine. Under optimal conditions, over 1.7 μm of copper deposit with a smooth surface was obtained after 3 h of plating, which did not contain iron as an impurity. The electrical resistivity of the copper film is about 3-4 μΩ cm corresponding to that of electroplated copper films.     

Nitridation of the Sol–Gel-Derived Titanium Oxide Films by Heating in Ammonia Gas

Dip-coated sol–gel-derived TiO₂ films on an alumina substrate were converted to nonstoichiometric titanium nitride (TiN _x ( x ≦ 1)) films by heating at approxmately 1000°C in NH₃ gas. TiO₂ films made from TiO₂ sols prepared from Ti(O– i -C₃H₇)₄ and stabilized by diethanolamine were more easily nitrided than those from sols containing HCl as a deflocculant reagent. This appears to be a result of the more porous structure of the former films.